Diving into Exploration
April 4, 2021
Design lessons, Technique tutorials
Flickr’s Dragonfly555 shows off impressions samples.
Do you feel like you have to make a finished piece or be working on a particular design when you sit down at your studio table? Sure, it feels good, and it’s very exciting to have a finished piece to show and share, but learning a craft is as much about exploration as is about creating finished work.
So, if you’re not giving yourself that exploratory time, let me give you some reasons to highly consider it. And if you do a bit of exploring already, maybe I can offer up some new ideas about ways to use and organize your exploratory bits that you might not have tried.
The Exploratory Reasoning
When you’re fairly new to a material, technique, form, or construction method, it is to your advantage to spend time just playing with it. This is especially true, I think, of texture, mark making, color mixing, new techniques, and new materials including new brands of a familiar material. Trying to make finished work before you are familiar with the technique or material can get frustrating, if not downright depressing. You can gain more success in the long run if you develop a better understanding of what it is that you’re working and hone your skills a bit before gambling your time, materials, and hopes on finished work.
It certainly can be tempting to just pick up something and see what you can make with it right out the gate. With a lot of home craft materials, polymer clay in particular, you can create a decent completed piece within a day of picking it up. However, the ease of these materials is a bit of a deception. They may be easy to get started with, but mastering them, even just a little, takes time and effort. Give yourself a gift of that time to get to know what you’re working with without the pressure of trying to finish something presentable.
Samples to Reference
Mica powders with sample chips
Probably the best way to explore new materials and techniques is to make small samples, ones you can keep and reference as you make decisions for future finished pieces. If the color of the sample is not relevant, you can just use scrap clay. If you use clay straight out of the package, you may also have an option to transform the samples into finished work. Let’s go over all these options.
(Although I’m going to talk specifically about polymer clay, if you work primarily in another material, consider an equivalent process. Consider how you can cut out or form small samples that can be saved as references. See if this clay focused process inspires you.)
For some orderly exploration, sheet your clay and then hand cut or punch cut the sheets into whatever shapes tickle your fancy. Then you can just go crazy with whatever you’re exploring. Use as many of these pieces as you like for each process you’re exploring. Keep the ones you are pleased with, etching with a needle tool or, after curing, writing on the back with permanent marker, what you made them with. Keep cured pieces in a baggie or punch holes in them before curing so you can string them on wire or chain, making them easy to flip through.
If you are playing with textures, mark making, or any kind of tooling on polymer clay, I would suggest sheeting three different thicknesses—the thickest setting, a medium setting, and the thinnest setting on your pasta machine. Then try out each of your experiments at least once on each of the three different thicknesses. Anything that impresses or otherwise moves around the clay will be affected differently by the clay thickness, sometimes subtly but sometimes quite dramatically.
Cure the samples you like, being sure to inscribe or write a note on the back indicating what thickness the clay sheet was along with what made the impression or marks.
If you’re color mixing, sheet the finished color, then punch out a decent sized shape, one that has enough room for you to write down your proportions for that color mix. For example, if you mix a deep rich purple by combining 6 parts cobalt, 3 parts magenta, and one part black, inscribe on the back:
6X blue
3X magenta
1X black
Also include a big initial for the brand of clay (P for Premo, F for Fimo, K for Kato, etc) since colors by the same name in one brand are usually nothing like those colors in another brand.
You can also note proportions visually by punching out a circle of clay, smaller than your mixed sample, from each of the colors you used in the mix. Cut out portions, like pie slices, from each color in proportion to how much was used in the mix to re-create a single circle showing how much of each color was used in the mix. Don’t forget to inscribe your initial for the brand of clay. See the image here for an approximate example of the purple mix above.
Adhere this combination pie to the mixed color shape, punch a hole in the sample, cure, and string on a chain or wire.
(If you are confused about how to figure out the parts aspect of the color mixing, just use a small cutter to punch your unmixed colors out of sheets of the same thickness. Each piece is a part. Use these punched bits of clay to make your mix, keeping track of how many pieces/parts you use to create the color you’re making.)
If you’re playing with a surface colorant, try it on both white clay and black clay or on clay colors you use quite often. It’s a rare colorant that doesn’t allow the clay base underneath to the show through, so trying it on black and white will give you an idea of how the colorant will appear on lighter versus darker colors, not just black and white.
I punch small-ish circles out of white and black sheets of clay, then I cut them in half and put a white half with a black half. I apply the colorant to these splits chips. After curing, I glue them to the colorant’s product container so my reference sample is right on the product. You can see here how well this works for those little mica powder containers, above. I keep them in a drawer with the samples facing up so I can quickly find the color I want.
The best part about all these samples is that while you’re designing a finished piece, you can pull them out and compare them side-by-side to see what works well together. You can also hold them up to a partially finished piece to see what you might want to add. Personally, I can’t imagine working without all my exploratory samples.
Turning Discovery into Works of Art
Just a few pendants and beads I made with extra texture samples by reforming and/or adding pin lace layers of clay. You can learn the pin lace technique in the February VAB here. The VAB PDFs are 40% right now too.
Now, for those of you who are anxious to produce something with your time at the studio table, you can take any samples you’re not going to save for reference and create with them. You can add additional layers, reshape, or attach embellishment to your extra samples to easily create pendants, earrings, or brooches. You can also use them for collages or mosaics.
Keep cured samples, even if you’re not going to use them for reference, for further experiments where you want to play with cured clay techniques or to test new glues or sealants. This way, not only is your time not wasted, neither are any of the materials you’re playing with.
Give Yourself Permission to Explore
Whatever your inclination, the big take-away here is that in-depth exploration can, and probably should, be a regular part of your creative process. Give yourself the permission and time to do this throughout your creative journey or career, not just when you’re starting out.
Keep in mind, not only does this kind of exploratory time hone your skills, your familiarity and confidence with the processes and techniques grow stronger and faster than they would if you tried to learn just through making finished work. This is because you are willing to take more chances with these scrap samples. They just don’t have the same stakes, right?
And, you know, taking chances with this exploratory sample work should eventually translate into taking bigger risks with your finished pieces. I think, when we take the big risks, that’s when we make the biggest leaps and create the most amazing work. Well, sometimes we make absolute disasters as well, but it’s all part of the process. You’re certainly less likely to have a disaster if you do a lot of exploration first.
Christi Friesen shares unusual and creative mark making in the March Virtual Art Box
So, if you have not let yourself just explore and play with the materials you work with, maybe, this week, you can either set some time aside or make all of your studio time exploration time. Making many of your mistakes in the exploratory phase and not always on completed pieces will make your creative time more efficient, less stressful, and more enjoyable.
Texture Hungry?
If you’re one of those who is looking for more ideas and direction on texture, don’t forget we have an entire issue of The Polymer Arts on texture, the Fall 2017 issue. Also check out the mark making focused edition of the Virtual Art Box from March of last year. All Virtual Art Box content that was previously members only is 40% off right now.
The Last of the March Giveaways
Our month of giveaways has ended, but all your wonderful comments have given me so many ideas for upcoming posts. I thank all of you who commented so very sincerely!
I have one last giveaway winner to announce. Valerie Hall is receiving the last batch of my giveaway Polyform clay. I was very excited about this. Valerie is a very active and giving soul who has been trying to teaching through the great clay shortage of 2020 in any way she can. So it’s fantastic to aid her with this clay package. Congrats Valerie!
This was so much fun. I will try to do this here and there as I receive samples or find opportunities to gather stuff for you. So stick around for more free stuff in the not-too-distant future!
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Metaphor and Simile
March 28, 2021
Design lessons
Christine Damm fits together leftovers from old veneers to create her “Distant Worlds” earring components. Just for fun, what kind of soup would make a suitable metaphor for these? I was thinking Italian Wedding soup!
How often do you use metaphors and similes when you are trying to explain something? I read somewhere that we use metaphor about five or six times a minute. I’m not sure about the accuracy of that number but we do use metaphor in small ways all day long and similes are often our go to option for things that we are having a hard time explaining. Why do we use these so much? Because metaphors and similes help us simplify complicated or hard to grasp ideas. They also help us see old things in a fresh way or make daunting things less intimidating.
Can you think of some things in your life that you would like to simplify, see in a new way, or find less intimidating? I think we all do and our creative time often has many complications and blind spots as the rest of her life. So let’s talk about metaphor and simile in terms of how can help you resolve questions in design.
To ensure the terminology doesn’t get confusing, let’s quickly define these devices.
Metaphor: assigning a word or phrase to something for which it is not literally applicable. For instance, “my studio table is a disaster area,” or “think outside the box.” Certainly, the studio table is not being cordoned off and applying for federal emergency relief, and I do hope you aren’t in a box to start with.
Simile: comparing two unlike things to make an interesting or exaggerated point, usually using the word like or as to make the connection. For example, “my studio looks like a war zone” or “I was as sick as a dog.”
Find Your Answers in Metaphors
The idea of metaphors and similes as a device for helping in design came up when I was reading the comments made last week for the giveaway in which I asked what design element people were struggling with. A lot of people are struggling with color which was expected since that is one of the harder elements to master but there was also a lot of concern about size and, most surprisingly, confusion surrounding the use of texture. Of course, this got me thinking about how I can help you better utilize or master these elements. The first things I came up with were metaphors.
So, let me give you a little design lesson on texture, since that’s the one that surprised me the most, with a metaphor.
In terms of techniques, textures are not hard to create, especially if you’re working with something as forgiving as polymer clay. The question seems to be where to use it, how much to use, and how to choose textures for your work. Thinking about this, I came up with a broad metaphor—cooking.
So, think about what you would have to do to throw together a pot of homemade soup. (Even if cooking is not your thing, it’s not so much about whether you can relate as whether you can imagine the equivalences the metaphors draw between art and cooking.) When you start a soup, you make a lot of your big choices up front, such as what kind of base—broth, tomato, or creamy—and then what’s going to go into it, particularly the protein and vegetables.
Your artwork isn’t that different. Your base choice starts with your intention—what you want to make or what you want to express—then you choose the materials you use and some key design elements such as colors marks, lines, surface design, and embellishments.
At the end of the soup recipe is where you usually find the spice. Texture, to me, is the spice. Although I tend to have an idea about what textures I might want in a piece just as I tend to know what kind of spices I think I’ll want in the soup, my process tends to bring in the texture towards the end of the decision-making. Note that I say it comes at the end of decision-making not at the end of the making of a piece since often times materials need to be textured before they are cut or attached.
Now, why would I save my decisions about texture until the end? Well, with soup, spice is what creates a lot of the discernible flavor and can really bring all the ingredients together. So, if we think of texture as spice, use it where this visual or tactile spice will heighten the “flavor” of the piece or, if you have kind of disparate sections, if they all have a similar texture then it becomes more cohesive.
The metaphor even works for the amount of spice or texture you use. Use a lot if you want the spice to be the primary experience the viewer has or keep it subtle or light so that it complements the other elements or helps them shine. Choose textures that work with the other elements just as you would choose spices that go with the proteins, vegetables, and soup base.
Kathleen Krucoff spices up her dangle earrings with a very light rough surface on the silver and a touch of gritty gold texture to bring our eye up from the focal point gems.
For instance, you’re probably not going to throw a bunch of pungent nutmeg and turmeric into a delicate chicken and wonton soup. That kind of simple soup needs some flavor from spice and herbs, but you would be better off with some bright lemon or ginger, maybe a sprinkling of cilantro or shallots. Likewise, if your artwork is pale and delicate, you might not want a deep and dense texture, but something shallow and subtle.
There is one point at which the soup metaphor kind of fails. You don’t actually have to have spice In soup but in artwork, every surface has texture even if the texture is smooth. Still, you can think of smooth textures as equivalent to a soup that doesn’t depend on spice for its flavor. That does mean that all the other ingredients/elements need to carry the design. If you go heavy on the texture, keep in mind that is it will probably overpower, visually, many of the other elements. You know, like cayenne pepper does in a pot of Texas chili!
Okay, so, This metaphor soup for texture will work for some and not for others. For some of you, the idea of texture being spice may have lit a big light bulb over your head and you just left me to run off to your studio table to try some things out. Fabulous! Of course, then there’s a bunch of you who have gotten this far but are scratching your head thinking, “I don’t get it.” That’s okay. Maybe you can find a different metaphor, or you might find similes easier to visualize. There’s Bound to be something that can give the concepts you’re struggling with the structure and simplicity you need.
I’m going to work up some ways to talk more about texture, size, and color over the next few weeks since those seem to be the primary concerns for so many of you. But in the meantime, look to other things you do for potential metaphors that might help you with your approach to various aspects of design, especially things you find easy to do or have a lot of experience with such as gardening, party planning, interior decorating, writing, or putting together the perfect ensemble for a special night out (if any of us can remember what that was like.) Ask yourself, what do I start with, what do I add next, what are the little decisions I have to make to get it to be perfect?
There is a good chance you can find a somewhat equivalent process to plan your designs if you think on it. At the very least, searching for metaphors and similes might bring up some options for a new approach to your work that you would not have seen had you not looked for a metaphor.
An Easy Search
If you need more detailed information on various aspects of design right now, go to the blog and use the search box there to find the posts in which we discuss those elements.
Also, did you know that you can search for articles and artists published in any of the Tenth Muse magazines by going to this table of contents page? There is a link at the top of all the magazine sales pages too.
The page allows you to search through the titles of every magazine article published through Tenth Muse, most of which include the subject matter in the title. The listings also include artist’s names and the author of each article. To search the page, use your “find” keyboard shortcut (Ctrl+F in Windows or Command-F for Mac) to bring up a search box that will help you find specific subjects, artists, or authors. Use the simplest version of keywords, (like mokume instead of mokume gane, or transfer instead of transfers) to have the most success in your search.
If you have a collection of The Polymer Arts or Polymer Studio magazines, bookmark the table of contents page so you can find out which issues have the technique, artists, or subject matter you’re looking for.
Last Week’s Giveaway
Last week the giveaway box went to Kathleen von Balson. She actually posted about trying to be more subtle in her use of contrast. I just love when the blogs get someone going in the studio and I get to hear about it!
Congrats Kathleen!
(You know, you are always welcome to post comments below or send me an email about what you got out of a blog post, especially if you have suggestions or questions. It helps me determine what to share with you here.)
This Week’s Giveaway
Thank you to everyone who took part in last week’s giveaway through comments on the post. I do hope it gave you a moment to think and refocus on design elements you’re struggling with. I think it was really revealing for other readers as well– there were quite a lot of replies to the various comments. So, let’s do this one more time.
The Goodies:
- This week I have a selection of Sculpey clays in 2 new Soufflé colors, 3 new Premo colors, and 2 big 8 oz. blocks of clay stash basics—Sculpey III in Pearl and Silver. That’s 26 ounces of fresh clay along with a three-piece set of Sculpey silkscreens.
- Or if outside the US, I have a $30 Tenth Muse certificate, since it would be such a gamble to ship clay outside the US.
How to Win:
- Put a note in the blog comments* (below), this time letting me know what else besides design elements you’re struggling with in your artwork or creative time. (Yes, I’m using you to give me ideas about what to write about my coming months. I think that will work well for all of us!) It can be one word or a whole explanation.
- Note: It may take some time for the comment to appear if you’ve not commented before since, due to annoying spamming, I have to approve it .
- Giveaway winners will be chosen by random—it will NOT be based on your answers. I do hope you’ll give it some thought anyway. The answers could be helpful to you as well as interesting for the rest of us.
- And let’s say you can only win once this month so we can spread the love around.
- Get your comments posted by Wednesday March 31st at midnight Pacific time to get in for the raffle.
- I’ll announce the winner here on the blog next weekend!
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Contrast of Self
March 14, 2021
Design lessons, Supplies & other fun stuff
Would you call yourself a selfish person? I doubt very many of us would think that way about ourselves. Yet, as artists, we often find ourselves “stealing” time away from others or other things to do what we love, reveling in it when we have it. Is that selfish? I mean, it is more about us than anyone else, isn’t it?
Yes, it is about us, and that is as it should be. In the requested comments for last week’s giveaway (scroll down to see the winner and this week’s giveaway), participants mentioned some version of the “me time” aspect of getting to sit down and create more than anything else. I mean, I know we create because it is something we enjoy, regardless of what anyone else thinks, but I just love that so many people acknowledged and celebrated it. We should!
I strongly believe that everyone should have something of their own, something they can turn to in order to express themselves or at least put something out into the world that would not have existed without their desire to create it. The art we create gives us purpose, exercises a uniquely human part of our brains, and helps us to love ourselves. Not to mention that we deserve the joy we get from it!
But, by definition, that is selfish—doing something because it’s what we want. I wish our society would get over the idea that doing something for ourselves is bad. I think not doing things for yourself is self-negligence. Why is that not a commonly understood thing?
This also highlights the bigger, contradictory world that we inhabit. We live in such strange societies where selflessness and humility are expected or requested, and yet we are also pushed to strive for excellence in what we do. How do we reach excellence without focusing on ourselves? And then there is this silliness where we are not supposed to acknowledge when the work we do is good or that we’re proud of it. If we do, others may think we’re being arrogant or grandiose.
So, do we strive to be great and then pretend that we’re mediocre? We talk about contrast being good in art, but this is so not the right kind of contrast!
I’ve long found the dichotomy of these contradictory but societally prescribed behaviors beyond aggravating as well as having the potential to be debilitating. I think that is why it made me so happy to see so many people acknowledging their creative hours as me-time, self-care, and a time of wonderfully selfish joy. Keep it up, I say!
Now, let’s talk about the good kind of contrast in art.
Design Refresh
Let’s look at the beautiful brooch by Lyne Tilt that opened this post. What do you notice first about this? There’s a lot going on in this little space, isn’t there? What are the three things that jump out at you as far as design elements?
I’m going to say color, shape, and texture. Did you come up with the same three? There is also a lot going on with marks and size. So, any combination of those would be spot on.
How about design principles? What do you think is the number one principal used in this design? Sure, we could refer to scale and proportion considering all the different sizes of the layers, or we could talk about focal point or even just key in on the centered composition. But the one thing this has in spades is contrast.
Obviously, there is color contrast in all the major color characteristics—she has a vibrant trio of warm colors contrasting the cool of the blue and cyan; color values range from the dark blue and deep red to the moderate orange to the light yellow and pale polished silver; and, if you check your CMY color wheels, you’ll see that the color of the bottom layer is a blue-cyan whose complementary AND split complementaries are the yellow, orange, and red that you see in the upper layers.
But doesn’t a color palette have to have at least one common characteristic between all the colors? Well, ideally, yes, and this does. Here it’s saturation. These are not muted colors. The orange may be slightly tinted (has some white in it) but not enough to feel it’s gone off base from the saturated characteristic that ties them all together.
Now, look at the contrast in the textures. The top and bottom layers might have the same texture, but the rest are vastly different. There are even different materials—metal and clay. But they work together pretty well, don’t they? Why?
The textures work together in part because they are all drastically different—the wide variety is part of the charm of this piece. But, like color, they need something to tie them together.
Did you notice that the textures are applied to the entire layer from one edge to another? Thier differences are connected because the application on each layer is the same. That does seem to be enough to allow them to exist in the same piece and not have it feel completely chaotic.
The shapes, on the other hand, are not completely different but they are not the same either, right? They are all some version of a hand cut circle, but some of them are definitely more oval. I think pulling back on the amount of contrast between the shapes also helps to rein in the potential chaos all this dramatic contrast and color and texture could fall into. The centered composition also adds a bit of calm to the piece.
Let’s take this week to consider the design principle of contrast. Would your pieces benefit from more contrast, or do you need to rein some of that in? Remember, it all depends on your intention. There are no wrong levels of contrast, at least not in art.
Last Week’s Giveaway
Drum roll please…
This last week’s randomly chosen winner is Eloise B! I’ve spoken to her and her clay is already on the way. Congrats Eloise!
This Week’s Giveaway
Thank you to everyone who participated in last week’s giveaway through comments on the post. As mentioned above, it really made me happy to see all the fantastic, positive and self-caring observations. I also hope it gave you a moment to focus on and appreciate what you love so much about creating.
So, let’s do this again.
The Goodies:
- This week I have a selection of Sculpey clays in 2 new Soufflé colors, 3 new Premo colors, and 2 big 8 oz. blocks of clay stash basics—Sculpey III in Pearl and Silver. That’s 26 ounces of fresh clay along with a three-piece set of Sculpey silkscreens.
- Or if outside the US, I have a $25 Tenth Muse certificate, since it would be such a gamble to ship clay outside the US.
How to Win:
- Put a comment in the blog comments* (below), telling me what type of contrast you enjoy creating most in your own work, or the type of contrast you wish you used more of. And, yes, if you want to share pictures, you can do so by including a link. Just don’t put more than one link in or it may spam filter the comment.
- Note: It can take some time for the comment to appear if you’ve not commented before since, due to annoying spamming, I have to approve it .
- Giveaway winners will be chosen by random—it will NOT be based on your answers. I do hope you’ll give it some thought anyway. The answers could be helpful to you as well as interesting for the rest of us.
- And let’s say you can only win once this month so we can spread the love around.
- Get your comments posted by Wednesday March 17th at midnight Pacific time to get in for the raffle.
- I’ll announce the winner here on the blog next weekend!
I’ll put together yet another pack of goodies for a giveaway in next weekend’s post, so stay tuned here!
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Of Hierarchy and Uncertainty
February 7, 2021
Design lessons
Have you started to see hierarchy in creative work everywhere since reading last week’s post? Consciously recognizing the hierarchy in artwork not only reveals the path our eye tends to follow around the work but can also tell you a lot about the artist’s intention and themes.
Maybe I’m a weirdo but I really enjoy searching out the hierarchy and the path the eye makes through a piece of artwork. Sometimes, though, the work seems so simple that one might assume there is not much of a path, if any, or that there really isn’t any hierarchy. But there always is.
Let’s do a deep dive on what initially appears to be a fairly simple composition. I’ve got a few surprise thoughts for you on this!
The Eye and the Hierarchy
I found this gem of a piece here a couple weeks ago on Lyn Tremblay’s Facebook page. It doesn’t appear overly complex at first glance, so where is the hierarchy? We probably all can see that the emphasis is on what looks like stitches between the predominantly yellow portion and the striated blue section. But does anything really take our eye around the canvas?
Of course, the answer is yes, there is a lot going on that brings our eye around the entire piece. Let’s map the probably path.
Before you read on, take a look at the piece and make note of where your eyes goes first and how it travels around the work. Then we can see if the likely path I found is similar to yours!
Did you find your path? Ok, great. Let’s do this!
I don’t think that there is any question that we are all likely to go first to the line of stitches and the edges they pull together but, I think, we don’t linger there for so very long. The brilliance of the yellow likely draws us towards the far end where we kind of float around like we are in a warm, comfy pool of sunshine.
However, the yellow’s disintegration into that murky gray-green is probably going to pull us away soon enough because that area has more contrast and there’s movement created by that color change as well as by the lines of yellow we follow back and forth as it tries to break through the gray-green.
The momentum of moving from one side of the yellow section to the other can be used to pull us off into the blue section whose striated lines push our view to the edge where we halt, ready to turn back but instead we may discover the grouping of impressed dots in the one corner, a surprising addition that slows our return so that we can land rather softly back at the stitches.
Of Interpretation and Uncertainty
Now, if you are to consider the hierarchy in terms of what you think the artist might find most important, I think you have to agree that it pretty much follows where the eye wants to go. Having found the path through the canvas and confirming what we believe her intended hierarchy would be, what do you think her intention was for the piece?
Something being held together must be central since the stitches are where the primary emphasis is. And there must be more significance in the yellow than the blue. Do remember what emotions and associations yellow brings up? It generally brings up thoughts of warmth, playfulness, and happiness when juxtaposed with primarily positive elements. (It can be associated with depression, stress, and cowardice is surrounded by dreary or negative elements though.)
So, is she trying to stitch a happiness that might disintegrate to the calm represented by the blue or to the openness of blue skies? She titles it Dream Weaver so could the line be where the edge of her dreams of happiness met the real world? Is that what she meant?
Guess what? It doesn’t matter overmuch what her own specific intention was. The fact is, the piece feels complete and cohesive which is likely due to a consistent adherence to her intention, and If the whole of the design is good enough to draw you in and to have you wondering or making your own conclusions, the artist has done a splendid job.
The composition and sparse elements seen here are enough to create metaphors in our minds, leaving us to fill in the blanks about what it might mean based on our own life and outlook. That’s the kind of thing that makes great design and wonderful art!
Uncertain Orientation
Here’s a bonus little lesson and a different view of the piece found on the same post. I found it really interesting that Lyn posted this piece in both a portrait and landscape orientation. The piece can be read rather differently depending on which way the piece is sitting.
The vertical orientation makes it look like the undeniable presentation of a wish or, not so coincidentally, a dream. On its side, and with the stitches to the right (remember the Rule of Right!), it feels more like a journey or a process as we have a gradual change going from left to right.
It may seem like a piece of art that is presented as not needing to be shown in a particular orientation suffers from a lack of commitment to the artist’s intention. It is the case sometimes but not always. I think in Lyn’s piece, it works both ways since the same basic idea of trying to connect the strange world of dreams with the reality of life, or whatever metaphor you might have found there, is still present although one way shows a strength of position while the other feels open to change.
And I think it works particularly well with the concept of dreams since they are subject to such wide interpretation. So why not allow the owner of the piece to hang it in the orientation they prefer because it best represents their interpretation of it? Kind of cool really.
That doesn’t mean you don’t need to create your work with an orientation in mind. Most of the time you probably should. But, in some cases, if it’s abstract enough, follows at least one of the compositional rules, (we have the Rule of Thirds working here) and it makes sense for the piece, leaving the orientation open to the owners preference can really work.
What Next?
Phew! That was a deep dive, wasn’t it? Were you able to follow my interpretation? I’d like to do this kind of thing fairly regularly, focusing on a different design lesson each time so you have a chance to really dig into the concepts along with me. But if it’s just a lot to wade through on a Sunday morning with the cobwebs not quite cleared out of your brain yet, let me know.
You can reply to this email, if that’s how you get this, or go to the contact page here. I am always thrilled to hear what you think whether it’s a commendation, criticism, or suggestion. Absolutely love getting all of them. It really helps me steer what I create for you.
During the next couple weeks, I think I might steer us away from design and talk about other things that can really help take your artwork up a notch. I’ve been in a lot of conversations and have been reading a lot about novel length fiction writing and I keep finding equivalences to the way one can approach art and so that’s where my mind is and I think some of the ideas might be pretty exciting for you.
So, join me again next Sunday for an easy read and some, hopefully, brilliant ideas. And the meantime, have a wonderful, safe, and warm (or cool if you’re down under!) week!
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like, just …
A Variety Show
January 24, 2021
Design lessons
Last weekend I talked about contrast, a concept closely related to variety, which is the subject for this week. Understanding the difference between the two can avoid a lot of confusion so I’ll be referring to contrast a bit today as well. If you didn’t see the last post, give it a quick read here.
Now, what is variation?
Variation is the range or assortment of differences throughout a design. Now, didn’t contrast also speak to differences? Yes, but those differences were between similar types of elements while variation is the degree of difference between all of the elements, principles, and placement choices in your work. It is like contrast in that variation is also used to create interest or energy or to otherwise support your intention, however, while contrast is often the key to adjusting the level of variation, you can have a fair bit of variation with little or no contrast.
To put it succinctly, contrast is the difference between two or more related elements while variety is about the relationship between all the elements in a piece. So, let’s talk about those relationships and how they are used in design.
Picturing Variation
First of all, keep in mind that you can create variation with elements or principles or pretty much any visual or conceptual part of your work.
Take the gorgeous pendant that opened this post. Liz Sabol has variation in color, line, balance, repetition, rhythm and even types of composition. In fact, even though we can identify a use of the Rule of Thirds, a Golden Spiral, and use of the Focus to the Right principle, it’s the barely-there nod to centered composition, created by an implied line from the midpoint focused, and yet asymmetrical, balance of the bail to the centered tip at the bottom of the pendant, that is holding all the chaos at bay. This piece is an absolute celebration of variation.
Alternately, if you use a lot of the same elements or employ principles in the same way throughout a piece, then there would be little variation. You can see that in this simple but still striking little pendant by an undisclosed creative on VK.com. (If you know who made this, do let me know and I’ll update the post.) Here there is regular rhythm, an absolutely centered composition, and every shape is circular. The only variation is created by contrast in the value difference between the black and white and the textural difference between the smooth outer elements and the rough interior disc.
Now, looking at the two pendants, I’m sure you can see that there is a huge difference between the energy and feel of them, largely because of the level of variation.
It’s a Matter of Degrees
So, as you see, a piece can be interesting with little to no variation or contrast. These concepts add points and degrees of interest. It’s your intention that should determine what role they will play in your work.
Just think, if you want a piece to feel solemn and quiet, avoiding high contrast and keeping your variation quite subtle may be what you need. That calm could be very awe-inspiring in its subtlety. Alternately, you can have a piece with the points of contrast and variation ranging from subtle to obvious.
You see an example of moderation in contrast and variation in Amy Genser’s Eventide pictured here. Yes, the piece feels quite busy and has a lot of energy but the contrast and variation are not that dramatic. There’s a lot of texture but it’s all rough and predominantly created from the rolled-up paper elements. The rolled paper elements are all ovoid in shape but with variation in regard to the roundness and width. They also range in size and are very in color although, like the rest of the canvas, they are predominantly blue and cyan, keeping to the cool side of the color wheel. The canvas does open up into a brief mix of reds and yellows in the middle and the color values do range from a dark blue to white. But the variation is applied in a gradual and moderated way. Most of the energy comes from the texture, the repetition, and the sense of movement.
So, we see here that the degree of variation doesn’t have to be high to create energy or interest as other elements and principles can do that quite well. However, I do think in this case that the level of variation included boosts the energy of the texture and repetition. It’s a team effort.
So, unlike some other concepts, there is no way to really list the different types or degrees of contrast and variation and what they might mean for your particular piece. As you’ve seen, this is in large part due to how much these concepts depend on, and play off of, the other choices made in the design.
This is only a quick introduction to the subjects of contrast and variation but I’ll continue talking about them in many of my future posts. If you think about it, I’ve actually been talking about these ideas throughout the year as the differences in your choices for the various elements and principles is quite wrapped up in your decisions on how you’ll employ contrast and variation.
Some of your choices for contrast and variation will be made automatically if you make characteristic choices for your elements before specifically thinking about contrast or variation, like choosing just daisies for a flower necklace or choosing green and red as your color palette because it’s for Christmas. Repeated daisies will dictate rather low levels of variation because of the sameness of the primary motif so you’d have to work with contrast in things like value and size to take it up a notch. And Christmas colors are high contrast so it would be difficult to make the work also feel calm or serene starting from that color palette.
However, you might find it more advantageous to make choices about the degree of contrast and variation that would best suit the work and then make that happen through the characteristics you choose for your elements. In fact, knowing the degree of contrast and variation you want can help you make more confident and intentional choices for your elements, various principles, and composition. That’s how influential the concept of contrast and variation is in art.
Perhaps this talk of contrast and variety will get you jazzed to try out some variations on variety your own self. So, while the sun is shining and the muse is calling, do try to have a wonderful, safe, and creative week!
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like, just …
Relationships in Texture
September 27, 2020
Design lessons, Inspirational Art
Evgeniya Aleksandrova has a rough texture over everything here but varies the depth and pattern of the texture as well as the color.
Since we talked about tactile texture last week, it would seem logical that I would talk about visual texture this week.
But I’m not! I don’t want to be too predictable!
No, that’s not why. Actually, it’s that most of what needs to be said about visual texture has to do with the usual recommendation of choosing characteristics that fulfill your intention. If you read my blog, even sporadically, you’ve heard this before.
As long as you understand that visual texture is a purely visual variation on or within a surface (such as marbling, mokume, ikat, or any application of an ink, powder, dye or paint medium), then, as described in the post from the week before last, you can choose visual textures simply by coming up with adjectives to describe your intention and do likewise with possible visual textures and match them up based on similar adjectives. That is the core of the approach for working with visual textures.
So, that being established, I’d like to, instead, talk about another thing you’re also familiar with if you have been reading the blog for the past couple months but which we have yet to specifically associate with texture.
Creating a Relationship
Last month I talked about choosing color palettes in terms of contrast and similarities. But guess what? Combining different types of textures also plays by the same basic rules of contrasts and similarities.
I love how Joy Kruze echoes the spots in the stone with the spots of metal in the texture created in the spaces between the metal lines of her unusual bezel
Most work you create or look at probably has more than one texture. It could be a combination of smooth and rough textures or a variety of different rough textures or variations of smooth ones. You may often combine tactile texture and visual texture, as well. What these combinations all achieve is variation. Variation in texture is pretty instinctual for most creatives, as is a desire for variation in color.
The variation between textures can be heavily contrasted but, like color, it helps to have at least one similar characteristic so there is some relationship between them. With texture, you can actually use other design elements to create that relationship such as using the same or related color or a similar shape for the texture’ s space. Once you have that similarity, everything else can be contrasted.
But what about using similarities between the characteristics of the textures? For instance, you could create only rough textures but vary how that roughness is created. Or all your textures could be stippled holes but you vary the shape or size of those holes.
Just as you need similarities, you’re probably going to want variation, too, not only to create contrast, but also to create shapes, layers, and compositional direction (which we will get to later this year).
The Need for Variation
Variation, as always, adds some level of interest, energy, and complexity to your work and you can adjust how much you add of these by adjusting the variation between textures (or any design elements) – from subtle to bold or somewhere in between.
Let’s say you want to make a piece with a strong graphic look. You’ve already chosen hard edged graphic shapes and bold colors. What about the texture? You might choose a slick, glossy surface as a primary texture. Now, what other textures can be used to vary the surface but have it still related to a glossy one?
Hélène Jeanclaude creates glossy surfaces on all parts of this necklace but between mica shift and mokume, and the contrast of colors, she creates variation and lots of energy.
If you want to go subtle, you could stick with variations on smooth textures such as a matte or satin finish. Alternately, you can choose to rough up the surface but in a very orderly way similar to the orderliness of your graphic shapes. This can be done with a series of dense, parallel lines, or a dense but orderly mark.
As long as the marking of the surface is the only thing that changes, then all raised portions of the comparatively rougher texture will be glossy. That will give you your similar characteristic – the gloss of the smooth surface and the occasional gloss of the rough surface.
This is not to say that you can’t have textures that are completely and utterly different. The extreme contrast could be, in and of itself, a relationship. That difference will cause tension or discordance, but that could be exactly what you want.
Here are just some of the characteristics in texture that could create similarity or contrast:
- Tactile or visual
- Smooth or rough
- The quality of the finished surface (glossy, satin, matte, or chalky)
- Type of mark, technique, or tool used to create the tactile or visual texture
- Organic versus graphic styles
- Size (how much space each texture takes up)
- Direction (if the texture visually flows or moves from one part of the piece to the other)
- Shape of the space it is applied to
A visual texture shows variation in density and repetition of the dots that make up this surface. Melanie Ferguson actaully etched the surface and then polished it with cold was so she has smooth tactile but rough visual texture on her surfaces.
As you can see, other design elements can become quite intertwined with texture. Marks, lines, size, direction, and shape all can play a role in the similarity or contrast of areas of texture in your piece. It really doesn’t take much for us to see a relationship between textures. If it’s there, we’ll see or sense it and the design will feel more cohesive for it being there.
Since that texture relationship can be, and often is, developed through other design elements we work with, this is not always something you need to be wholly conscious of. But, if something in your work is not looking right, check for the relationship between your textures as well as your colors and other elements.
And, if next time you are looking at your work and feel like it needs some contrast in its tactile or visual texture, just look at the dominant texture that you have and, using it as a starting point, choose possible other textures or design options that will create at least one similar characteristic, still provide contrast at the level that makes sense for you piece, and has characteristics that recall the theme of your work.
Last Days for Club Discounted Forever Pricing
3 days left to join the Devotee or Success clubs at the FOREVER discount price so you can get first dibs on limited stock offers, discounts, and goodie box giveaways, all while getting a mid-week mini-mag of brief articles to keep your creative energy and ideas going. And right now you can also get in on it with a 2 week free trial! .
So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club 0r buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.
Visual Contrast … Out of Doors!
Packing up to take the camper van conversion for a test drive up the coast, just one night. That’s been my little side project that I’ve been getting myself lost in for an hour or so most days. It’s not completely done but good enough for one night out for my better half and me. I need some contrast between life inside this lovely home of ours and the outside and distant world! So, I am off. I hope you all are looking for new and novel things to add a bit of excitment and contrast in your lives as well!
Tactile Allure
September 20, 2020
Design lessons, Inspirational Art, The Polymer Arts magazine news
Melanie West’s satiny smooth finish has a heavanly tactile texture even though many people might think of her pieces as being textured because they’re so smooth. Yet smooth is actually one of world’s most loved textures.
How often do you touch art?
No, I don’t mean being the unruly museum visitor who gets yelled at by the docent, but in your everyday life, how many things do you touch that you would also consider art?
Works in the applied arts, which encompass decorative art, adornment, and functional objects, are often things that we touch. Because of this, the tactile texture of most applied art is exceedingly important. Not only can the wrong texture put someone off from buying a piece, but the right texture can make a huge difference between people liking your work due to its visual appeal and being utterly in love with it because it feels so good to touch. It is also another means by which you can express your intention.
Choosing Tactile
The first time I touched a Melanie West polymer bead, it was like taking a bite of the most heavenly chocolate mousse. Her finishes are flawless and so soft; my fingers just couldn’t get enough. That kind of tactile reaction is golden. It also supports her soft and organic themes. As wonderful as her finishes are, that kind of texture may not be wanted in your work or may not even be possible due to techniques or materials you are using.
The point is that her textures are part of the experience of her work and, if you’re creating things that will be handled, you too should consider the experience of touching your piece as part of its aesthetic value. As always, let your intention drive your decisions, but pay attention to the physical sensation experienced when handling the work and aim to have it support your intention, alongside all your other design decisions.
For instance, if you want to share your love of the beach through your work, think about the physical sensations that stand out the most – the soft breeze on your face, the refreshingly cold water on your feet, and your toes digging into cool sand. Now, how do you translate those physical sensations into tactile texture that will help you share that experience to those who will handle your work?
You can do so by thinking in terms of those adjectives – soft, refreshing, and cool. You probably want those to be the dominant sensations so don’t go for, say, a sandy texture just because the beach has sand. Is a gritty, sandy texture going to convey soft, refreshing, and cool? Chances are, it’s just going to remind someone of getting sand in their shoes and other uncomfortable places. You can create a visually sandy texture that includes sandy colors and a speckled look, but in terms of tactile sensations, going for a soft, maybe matte surface that will feel cool and soothing to the touch will share something closer to the sensations you want to relay.
Felt may have textural limitations but the final texture is still a choice. Olga Demyanova contrast a tight, even texture with the rippling and rougher orange edging and accents in this intriquing handbag.
There are a lot of materials that have limits on the tactile textures available. Polymer clay can replicate most tactile surfaces except for fuzzy, but felted work is limited to that dense and slightly rough feel of matted wool while glass will almost always have a smooth aspect. There are also techniques that create their own texture or limit how you can further manipulate the material to create texture. Learn the range of tactile sensations available in the materials and techniques you use so you know what options you have.
Work that Begs to Be Touched
There are a couple things you can focus on in order to create work that people will love to touch. It primarily involves smoothness and variation.
Smooth Surfaces
Our sense of touch enjoys traveling along a pleasantly smooth substance such as polished metal or stone. But what we like most is softness, such as a fluffy blanket or bunny fur. Softness is a type of smoothness as it allows our skin to glide across, unimpeded.
Note that you can re-create the look of fluffy and furry textures in hard substances such as clay or wood but you can’t re-create the same associated softness because, in those materials, you lose the ability for our fingertips to effortlessly glide across it in the same way due to the unevenness in a hard surface. So, recreating the look of fur doesn’t necessarily re-create the tactile experience. The ‘look’ of fur is just a visual experience.
So, be careful to think of smooth tactile texture, not in the way it looks, but the way it feels.
Klavdija Kurent gives the wearer of her jewelry much to explore with their fingertips.
Variation
Our fingertips were made for receiving information, and lots of it, so they do very much enjoy a variation in texture. However, we don’t normally enjoy variation that is sharp, prickly, scratchy, or sticky. These textures make it hard for our fingers to glide along and take it in, not to mention that they are also often painful.
However, bumps, grooves, and fine lines excite the nerve endings. It’s just like the sense of taste – we aren’t too happy with things that are bland but a lot of flavors that go well together thrills our tongue. Our fingers, likewise, enjoy complexity.
The Best of Both – Smooth and Varied
I think you’ll find that pieces with both a smooth and varied surface attain the pinnacle of touchableness.
Take a look at the pearled bracelet here. It is not even in your presence and you probably still feel a tiny urge to reach out and touch it. That’s because each half pearl has a small, smooth surface which is further aided by the round and unimpeded nature of its shape as well as there being a varied field of them.
The combination of smoothness and variation in this bracelet makes for an engaging texture, adding energy to the piece both in its tactile and visual nature. Note that this also has a bit of rough texture around the edges to provides textural contrast. Because contrast is important in texture too!
The contrast of texture fit well into my intention of showing the classic perfection and allure of pearls in an organic setting. I wanted it to be a subtle reminder of the messy world pearls actually come from even though we now associate them with neat, tidy, and conservative dress.
The Tactile Balancing Act
The textures you choose will dictate limitations in terms of surface treatments and other parts of your design, so you have to balance out your tactile texture choices with your other design choices. For instance, if you create a deep and dense texture on a light color, it’s going to appear darker, which you might not want. Or you may want a very smooth surface but want pattern to raise the energy so you would have to figure out how to incorporate pattern visually with inks, veneers, or other smooth surface applications.It just needs to make sense for your intention and the limitations of material.
If your tactile texture decisions, weighed in light of all the other decisions you have to make about color, shape line, function, etc., are chosen in service of your intention, you are sure to have a beautiful, cohesive, and interestingly touchable design.
Should I Call Them Mini-Mags?
The first week of the Art Boxer Clubs has commenced and one of the first comments about the weekly Pick-Me-Up is that it ought to be described as a mini-mag. I guess it is. It’s hard to take the magazine attitude out of me. There were 5 little articles and a good handful of links for further exploring. So, yeah, maybe it is a mini-mag. I might have to rethink what I call it.
But regardless of what it’s called, joining the club will get you a little extra boost each week and at least once a month, you’ll get a special discount, a first dibs or limited stock offer, and/or a giveaway. And right now you can get in on it with a 2 week free trial and a FOREVER discounted rate.
So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club (there are only a few spots left in this upgrade to personal coaching option, at least as of my writing this), or buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.
No Fires Here
We are still a safe distance from all the fires and the sky has started to clear up from the smoke so nothing too exciting to report from Tenth Muse central. I’ve already gotten started on the next project but I don’t want to say too much about it. It seems like every time I say something, I get jinxed and delayed. So, you’ll just have to stop by and check in with me on the weekends, or read the newsletters, or, if you want to be the first to know, join one of the new Club options as Art Boxers will be the first to know (as well as getting extra discounts … just sayin’.)
I hope you all have a relatively unexciting week yourselves. It’s not like we need much more excitement with the craziness of the world providing plenty already. Just go make beautiful things and be kind and caring to each other.
The Language of Texture (Plus … Discover the new Art Boxer Clubs!)
September 13, 2020
Inspirational Art
Dawn Deale, Crackle bracelet using gold leaf with alcohol inks.
Now that we’ve spent three months intensely delving into color, are you ready to completely switch gears and explore a different design element?
How often, when you are creating something, do you ask yourself “What kind of texture do I want?” Or, more importantly, “Why this texture?” I think we can all agree that texture is an extremely important part of all types of arts and crafts and, like color, is probably more often than not chosen consciously. But why do you choose a smooth texture versus a rough texture? Or a simple texture versus a busy one?
I think the first thing we need to define in terms of texture is what it actually is. Do you automatically think of some uneven and fabulously tactile surface? Well, certainly, that is a type of texture, but that is only one type. Texture is more wide-ranging than that. At its most basic, it is the feel or appearance of a surface.
Texture can be of two primary types – tactile or visual.
For instance, tree bark is generally rough. If you can reach out and touch the actual tree bark that is tactile texture. If you have a glossy photo of tree bark, the texture is still rough, it’s just visual rather than tactile. If we don’t make this distinction, you could say that the photo of tree bark is smooth but you’re actually describing the tactile texture of the glossy paper.
So, you know what? That means you potentially have two decisions to make when it comes to texture – what kind of tactile texture and what kind of visual texture will your piece have?
In this necklace by 2Roses (Corliss and John Rose), softly marbled polymer gives subtle variation to the visual texture of its beads.
Your initial decision for each is not too hard being that you really only have two basic options for each – will it be smooth or not smooth? Or you can say smooth or rough, although I think rough has a lot of specific associations but it does describe the alternative to smooth.
Your chosen texture will actually be on a scale from smooth to rough. It will also be relative to the smoothness or roughness of other textures either on the piece or to similar textures. Beech tree bark is relatively smooth compared to oak bark although it is relatively rough compared to, say, glass.
Lightly marbled polymer clay (like that in the necklace seen here) will have a rougher (or busier or denser) visual texture than a solid sheet of clay but is not as rough a visual as a finely crackled alcohol ink surface treatment (as in the opening image), don’t you think?
You may be tempted to say that sometimes you choose to have no visual or tactile texture, but what you’re really saying is that you want a smooth visual or tactile texture. There is still texture; it’s just smooth or without variation breaking up the surface.
Now is it really important to call what we might see as the absence of texture as smooth? Well, how will you define the emotive, symbolic, and/or psychological meanings or effects of your surface if you don’t acknowledge its type of texture? I think that would be a little rough. (Sorry for the pun!) And that’s what I really want to talk about today.
Talking with Texture
As with color, different textures communicate varying emotions and atmospheres but, unlike color, texture can rather easily communicate all kinds of abstract ideas in very concrete, and sometimes quite literal, ways. Concepts that deal with the physical nature of things like force, fragility, turbulence, or stillness are not only readily interpreted or felt by viewers but they are also readily determined by artists. I bet you can think of a texture that could represent each of those for physical concepts within a couple minutes if not a handful seconds.
Texture can also readily elicit specific emotions such as comfort, fear, revulsion, and desire. To come up with textures for emotions, you could just think of a physical thing associated with each (fuzzy blankets for comfort, sharp knives for fear, etc.) and from that come up with a texture (a soft, matte surface for comfort, or sharp, erratic lines for fear, etc.).
“Lichen” tiles in porcelain by Heather Knight. They are all dense, tactile textures but they convey different things. What words would you associate with your favorite 3 in the image?
You can pretty much come up with a texture to go with the intention of the work you’re creating simply by identifying what characteristics you associate with the ideas or emotion of your concept or theme. For some people, recognizing these characteristics is very intuitive. For the rest of us, or even for those who feel they’re intuitive, it can help to come up with words you would associate with your intention and develop your textural design decisions from them.
This could be as simple as throwing out a few adjectives to describe what reaction you want from the viewer or you could list specific ideas or objects related to your theme or concept and then consider textures that you associate with the words you’re writing down.
If you have a hard time just freely coming up with textures, you can find possibilities to jump-start your ideas by looking through your texture plates/stamps/random objects stash for textures that evoke those words. Or you can look at artwork to get ideas. Determine what emotions or sense you get from various pieces and then identify what textures are used.
I know I brought up visual versus tactile texture but I’m got not going to talk about them any further today. I’m going to save those for the next couple weekends this month. I haven’t decided which to do for next weekend so it’ll just be a surprise. Just have fun coming up with adjectives to associate with textures that you can use to help support the intention of your work.
Announcing the new Art Boxer Clubs!
The first of the latest projects I have been brewing has launched!
The content of these Art Boxer clubs will be aimed at all types of mixed media creatives, not just polymer clay artists. Like the blog, the focus will be on increasing your design and creative skills while helping you stay energized and engaged in your craft, all while mixing in a good dose of fun and exciting bonuses!
I am keeping core design lessons free here on the blog for now but giving you many of the other features that were in the original VAB plus some new exclusive offerings:
The Art Boxer Devotee Club… $9/month: Exclusive weekly (Wednesday) content including mini-lessons, creative prompts, project ideas, and challenges as well as member only discounts and offers, giveaways, and early notices on all sales, new publications, and limited items. Get 2 weeks free to try this out if you join during the month of September. Go here for full details!
The Art Boxer Success Club… $35/month: For serious aspiring artists or artists looking to take it up a notch, this includes everything the Devotees get plus twice a month email or once a month chat/zoom coaching sessions. I’m reviving my creative coaching services but in a limited way – only 20 of these memberships are available. This is a very inexpensive option (normal rate is $65 for similar coaching) for one-on-one support to help with whatever artistic and/or business goals you have been aiming for. Click here for the details.
*If you are already a monthly contributor toward the support of my projects and free content, you will automatically be added to the Devotee Club member list, even if you contribute less than $9. If you would like to move up to the Success club, just write me. Thank you for your early and continued support!
If you have questions about the clubs, write me here and I will get back to you on Monday.
And don’t forget … the 25% off PRINT publications sale is still going on.
Good only until Tuesday! Click here to get in on this before the sale is gone.
Under Smoky Skies
Thankfully (for me), I have no crazy personal updates or unfortunate stories to tell you about. I hope I haven’t disappointed those of you all into the Sage soap opera over here. I’m loving my new physical therapist and although I haven’t seen any significant progress thus far, my knees, shoulder, and elbow have not gotten worse. And hubby’s face is healing just beautifully so we are pretty content in our recoveries here. So that’s cool.
Speaking of cool, how many of you are dealing with weather changes due to fires in your area? We were supposed to have another hot week but the dense smoke all over California has developed its own little weather system, blocking out the sun and cooling down the day. Too bad the air quality is too poor to go out and enjoy the nice temperatures. We also have this weird orange-yellow cast to the daylight. It’s just otherworldly.
To be clear, there are no fires anywhere near enough to endanger us although I suppose that could change at any moment. Between the wonky weather and just what a ridiculous year this has been, I think we all should just stay in and create beautiful things for a while. At least until the skies clear up. What do you think?
Well, I hope, wherever you are, you are staying safe and healthy. If you join one of the clubs, then I’ll chat with you on Wednesday!
Changing Forms
January 26, 2020
Inspirational Art, Polymer community news, The Polymer Arts magazine news
Table by Alice Stroppel – www.polymerclayetc.com
So, have my suggestions thus far this month triggered any new ideas for fresh and exploratory directions in the studio? Well, if it hasn’t yet maybe it will this week. Even if this month’s ideas did have you looking into some previously uncharted territories, my theme today can work in conjunction with new materials, big new projects, and collaborations as well.
But first, at quick note … have you signed up for the new Virtual Art Box coming out next weekend? I do hope you plan to join us if you haven’t already. Not only will you get great material to keep you inspired and keep that creative wheel in your head turning all month long, I have a couple specials just for my art boxers including a freebie and deep discounts. 
I’ll be drumming up such specials from polymer and mixed media craft resources every month, most will be worth much more than you are paying for the art box itself. Plus, for just another week, you can get in on a forever lifetime discount, just because you jumped in both feet first with me on this new adventure!
Ok, back to pushing ourselves, or at least thinking about it, this month.
I was thinking that a really stimulating challenge would be to work in a form that you have not worked in before. You know, like if you normally do jewelry, try decorative arts or sculpture. If you do wall art try your hand at jewelry. But knowing most of you, you’ve probably dabbled in a quite a few different forms. So, I think we need to look at some unusual territories within various art forms you’ve already tried.
For instance, if you work in jewelry or other adornment, consider what types you haven’t tried creating. Hair adornments, perhaps? Ankle bracelets? Gauge earrings instead of pierced? Tiaras perhaps? How about lapel pins, cufflinks, tie bars, or bolo ties? Or just men adornment in general?
If you create or cover a lot of home decor, move beyond the vases and switch plates and look around for other hapless home victims like ceiling fixture pulls, trashcan lids, lampstands, or the finials on the ends of drapery rods. Really, nothing should be safe from your decorative touches.
I could probably make an insanely long list of oddball things that could either be made with their covered with polymer, but let’s just look at what a few people have done with some less than common forms and see if these pieces can’t push your ideas about what you can do with polymer clay.
Strange Polymer in a Strange Land
when sitting down to write this, I wandered around the house looking for things I thought could be made with polymer, but I hadn’t seen much of. It is actually kind of hard. I see a lot. But how about this– incense burners? Maybe people don’t burn incense quite as much as they used to and perhaps that’s why we don’t see people making them in polymer clay but, on the other hand, they’re so easy to make and you have a really wide range of possible shapes they could take. You would think a few people would be regularly popping some out. But they are hard to find.
For an incense burner, all you need is a stable form with a snug hole big enough for the incense sick to stand in and, preferably, a platform to catch the ashes. You can have incense stick standing straight up or have a long tray the stick would hang over or you can ignore the tray component completely. That should be easy, right? I do wonder if people hesitate to make incense burners with polymer because they believe the hot embers will singe the clay. I very much doubt that would happen, especially if you create a straight up stand type, where the ashes have a long way to fall. Here is one example of an incense burner created with cane petals by Israel’s Marcia of Mars Design. It’s a straightforward construction and a pretty, as well as functional, little piece
You should check out her dreidels as well. I’m not sure Marcia is working in polymer anymore, or at least she’s not posting, but she did have a lot of fun ideas you can find on her Flickr photo stream.
This next suggestion seems to be such a minimally explored area of adornment for a category with such a wide range of options. I’m talking about hair adornments. There are so many of them – barrettes, hair sticks, hairclips, hair combs, hair beads, bun caps and cages, hair slides, tiaras, head wreathes, hairbands, headbands, hair charms, hair rings, and hair twisters (a.k.a hair spirals or ponytail wraps). I am partial to hair slides myself because they can double as scarf and shawl pins so you can pull them out for all kinds of occasions. You can see how I make mine with the in-depth tutorial in the Polymer Art Projects – Organics book. Here’s another example of a hair slide from Emily May. Like the incense burners, as long as you planned for the basic form, one that allows a stick to pass through from one side to the other, you can create pretty much whatever you want.
And I did mention the nothing should be safe from polymer in the house? I can’t tell you how often I look up at window molding or the insets in a door panel or the trim on a cabinet and think “A bit of polymer could go right there!” Okay, maybe I’m pushing it for someone with limited studio time who wants to add sculptural elements, not canes or other veneers, to large immovable parts of my house. So, does may be a cane covered table sound more reasonable? That can be pretty ambitious as well but at least it can go with you if you move or can be sold. Just look at the table by Alice Stroppel that opens this post, or this amazing work by Bridget Derc.
Bridget’s canes are intense, as is her process, really. You have to skim through her Flickr photostream a bit (check out the bottom half of pages 3 and 4) but she posts a lot of photos of her process. It’s pretty amazing. And check out Alice’s website for more of her polymer table adventures.
Now, what if you’re into sculpture? How do you push the form there? I suppose if you normally sculpt “in the round” you can do bas-relief sculptures or vice versa. You could, of course, also venture into any of the other myriad areas of polymer and craft and apply your sculptural skills there, but this next piece might give you a whole other set of ideas. Why not, literally, take your sculpture somewhere you haven’t taken it before. Like outside maybe?
Tatjana Raum photographs her tree spirit sculptures as if they are in trees, although I think these are all in detached parts of trees like large swaths of bark and pieces of drift or dead wood. Even if they are not attached to a living tree, the tree material gives these other-worldly faces an unusual context that enriches the sculpture and how a viewer will perceive it. And what if you did put a bit of polymer art into a living tree? What a great surprise for a passerby!
Okay, that is all for today. I’ve got to start making these posts a bit shorter as I will have a lot to do for the Virtual Art Box each month. I am so super excited about what I have for our adventurous art boxers though. I don’t think it’s going to be what anyone is really expecting but I think it’s going to be a fantastic surprise, especially for readers who really loved The Polymer Arts magazine. I think we’re going to get to know each other a lot better and are in for a really creative year!
For now, have a wonderful and really creative week and I’ll see you next weekend!
Moving away from polymer for your opinion today, I thought we’d look at a ceramicist because, for one, it’s another type of clay, so it should be easy to translate what you think of polymer into ceramics, and, two, holey ceramics is a little unusual and really, really cool.
Simon van der Ven returns again and again to these delicate ceramic structures, many with a lot more holes than you see here. What you think of the form? How about the combination of smoother leaves breaking into a very different kind of texture? Do you think this would have benefited from more color? Why or why not?
I think we will make this the last day of entering the drawing by commenting, and I’ll get you some fun holey and/or lacy techniques to consider for tomorrow. So, get your thoughts in today. We’ll get another drawing going soon, but thank you all for participating in this one!
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Let’s do something a little different with our participation week today. This image does not contain finished pieces, but rather they are a technique developed by Violette Laporte. You can go here to read about what she was doing and her thoughts, but what I’d love to see is your thoughts, not on the design, but on what you would do with these to finish them. Or, how would you apply this technique to things you already do? Even if it’s not your kind of thing, try to think of a way you could incorporate it into your work.
Also, if you go ahead and actually make something from this, please send me photos! I would love to see what this post might inspire!
And, don’t forget to go back to the previous day’s posts to see how your observations compare to other peoples. There is an amazing amount of similarity in comments. I got to speed read through them all, but we still had technical problems to fix yesterday, and today, I am getting on the road for some time with family and my other half. But you know, I’ll be here every day too!
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
I thought we’d end this week on depth with an in-depth mini-interview conducted by Randee Ketzel. This time she spoke to Claire Wallis who doesn’t work with illusionary depth, but does explore faux and illustrative techniques quite a bit. Here is what Randee sent to share with us:
Claire Wallis is probably best known as the creator of the faux knit tutorial in polymer clay, which she generously shared with the world, but there is so much more to her work. Caner, sculptor, illustrator, Claire is a self-taught artist from the south of England and came to polymer ‘entirely by accident’. She played with it as a child and became re-engaged with it after viewing the works of other artists on the Internet.
An avid fan of Fantasy/Sci-Fi, she has carved her favorite characters on pumpkins, sketched them on chinaware, and sculpted them in polymer. She also illustrates–this elephant cuff is smashing–and clearly has no fear of color, as evidenced by her eye-popping bangles.
The influence of her other artistic explorations like ceramics, acrylics, pastels, printmaking and pyrography is evident in her work, though she says she had very little formal training. She counts that a blessing, as it leaves her free to approach polymer with no preconceptions as to how it ought to be used. As she puts it, “I find ignorance is not only bliss, but genuinely constructive, particularly in a medium as adaptable as polymer clay.”
Her driving force is a keen desire for craftsmanship, every piece should be the best it can be, and she can’t imagine a day without some artistic endeavor to try her hand. Claire recently gave up her job as an assistant manager for St. Barnabas’ charity shop (which helps support their hospice work) to be a full-time mom and is waiting to see where motherhood leads her creative processes.
She describes herself as ‘a bit of a one-trick pony,’ with which I humbly beg to differ, given her obvious mastery of so many media and techniques. She says of herself, “I love to read and learn, and for me nothing beats the sense of achievement you get when you master a new skill.” We will eagerly await the next chapter in her new adventure. In the meantime, you can certainly glean hints from her Flickr photostream and maybe recognize a kindred soul.
Randee Ketzel, a life-long craft artist, previously worked in metals, but is now a polymer enthusiast and co-author of “Polymer Clay Gemstones, the Art of Deception” a different kind of polymer book devoted to faux techniques and the reproduction of historical jewelry. Her book can be found on Amazon while her other tutorials can be found in her Etsy shop.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
It would be hard to do a week on the illusion of depth without taking a look at one of our foremost masters in the category of mica shift. Dan Cormier and his uncompromising approach has given us some of the most beautiful examples of illusionary depth in polymer.
And here’s a treat, even for those of you quite familiar with his work. This black necklace hasn’t really made the rounds primarily because it was not in Dan’s possession very long, being sold off to a worthy student and artist shortly after its creation. The other half of this treat is that I got Dan’s thoughts on this piece and a little of its story in a recent email to add depth to our admiration of the work:
When working in a medium of infinite colour like polymer clay, sometimes it’s fun to turn the volume down a few notches. This monotone necklace is another example of my “Texture Without Texture” techniques. Like my Discovery Necklace, the impressions were made with custom-made polymer clay punches, bent wire, ball stylus tools, and also bits of patterned sheet metal. With the exception of actual holes in some of the bead veneers, the surfaces of these beads are all smooth.
The woman who owns this necklace is a very cool brain surgeon and potter from Victoria, BC . We met her when she signed up for one of our week-long retreats on Gabriola Island, BC … she confessed on Day 1 that, while she was comfortable as a crafts person in clay, she’d never even opened a package of polymer. Nevertheless, knowing her ‘day job,’ I was confident that my medium was in capable hands.
Dan and his partner Tracy also continue to innovate and develop new tools and techniques. They recently vastly expanded their die sets collection with a beautiful line of elongated shapes that came out this summer, and a new set based on the beauty of the insect world is about ready for shipping. Check out their new offerings and their classics on The Cutting Edge website.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
The real or illusionary depiction of depth is something that draws the eye. We want to see what is down there, what is in the shadows or just beyond, what we can make out by looking deeper. Depth in polymer can be achieved through a myriad of techniques and approaches.
Let’s start this week of looking at creating a look of depth with this amazing necklace by Victoria James. The depth is subtle, but like shimmering pebbles just under the trickle of a clear creek, you want to reach in and touch the texture here. It is so hard to tell from the photo how this was achieved, but here is what Victoria says:
“These beads were created with the shingle cracked growth ring texture sheet. They are made from polymer clay, alcohol inks and metal leaf. The look of depth is an illusion, they are perfectly smooth.”
So, we are thinking this is a really great buffing job here. If it was flat, I might say resin with that shine and layered translucent appearance. But, I don’t think so. Mica shift may have played a role, but then again, it’s hard to say from here. What we can all say, I believe, is simply … wow. Beautifully done.
More illusion, texture and faux can be found on Victoria’s Flickr page and on her website where you will find her work in basketry, as well as her collection of ‘real’ world texture sheets.
f you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Read More
This is really not a tutorial but more of an inspiration, hopefully, to look outside our community’s offerings for things we can learn. There are many other craft forms that have tutorials that will teach you skills applicable to polymer.
Papercrafts, scrapbooking, beading, and, of course, ceramics have a lot of learning opportunities. I’m using this week of cool tutorials and tips to just look at something that represents the most basic approach to working the surface of an elastic material–sculptural texture. We have so many color options and additions we can add to our clay that perhaps we skip over this very basic approach when such work could be the very thing to add the energy or impact you are after.
Hand tools on clay have been a staple method of creating in clay craft throughout its history. Really intricate decoration with hand tools can take some time and patience, but it can result in amazing textures and designs. This work in progress and the cups below are decorated primarily with carefully placed impressions added over and over in a pleasingly fluid design by ceramicist Gary Jackson. There’s nothing more here than clay and a hand tool. So simple and beautiful. Does it make you want to go back to basics and just play with the clay for its sculptural qualities alone? I bet this kind of work is extremely meditative and zen-like. I could really use some of that.
But, no sleep for the wicked or, as I say these days, the overworked. I am off to Racine, Wisconsin today for the Polymer 2.0 conference. I will get you one last fun, surprising tutorial tomorrow then next week, I hope to have enough photos to share the thoughts and the art that I’ll be immersed in this weekend.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
In my house, anything can be art materials. And I mean anything. We keep trying to come up with more ways to use the hair we brush off our furry kids, but dog and cat hair is troublesome and far too plentiful as inclusions. But seriously, if we have a lot of anything we’d otherwise throw away, my roommate or I have tried making something with it. Dryer lint is rather plentiful here (and full of pet hair too) and has long had its place in my studio. Yes, it sounds odd, but it’s really a fantastic material. I’ve been using dryer lint for years as an addition for strength and bulk in paper, resin and concrete castings. I don’t know why I didn’t think about mixing it with polymer, but someone else did!
Vanessa Brady was looking for something to help create a faux stone look when she came upon the dryer lint idea. And it does work beautifully. You can see here how it gives the faux rock a subtle rough look. I would love to see this faux rock technique in bolder colors and translucents. I may be giving this a try myself in the next couple days just to see. It look quick and easy enough for a whole slew of experimentation. The complete tutorial is on Vanessa’s blog along with other polymer and non-polymer crafty tidbits.
Additional note: On its own, lint is a rather flammable substance so use it with care. Keep it away from open flames and heating elements. Mix it well in the polymer clay before curing.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Although shibori is a fantastic source of inspiration in polymer, adding the liveliness of rippling lines and textures can be achieved in a myriad of ways. Just consider what rippling is and how it works in a design.
Ripples are lines and like any lines, they create movement. However, unlike the forcefulness of straight lines or the gentle leading of curved lines, ripples usually portray a calm but steady energy making them an eye catching element in any design.
Here are multiple examples of this all in one necklace as created by Vickie Sixsmith. We can see the energy in the rippled edges of clay discs, not unlike those on Kim’s bracelet we talked about yesterday, along with the subtle movement in the snakes of wound clay as well as in the soft visual sway of the feather canes covering the focal and side beads. The energy is slightly different in each approach, showing the varying levels of energy and d movement that can be achieved with rippling lines.
Besides explorations in ripples, Vickie and her mother Jean Twigg, who together are Fusion Jewellery Designs, explore a variety of form and texture but movement and energy is a primary focus. You can see more of their collective work on their Facebook page and Vickie’s postings on her Flickr photostream.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
This week we’re going to look at rippling and related visuals. Inspired by Shibori and Shibori like items on Pinterest, my editorial assistant Paula Gilbert, sent me a number of links to Shirbori like pieces. Shibori, according to the entry on Wikipedia, is a Japanese tie-dying technique. There are an infinite number of ways one can bind, stitch, fold, twist, or compress cloth for Shibori, and each way results in very different patterns.”
In polymer, folding or fitting together sections of blended clay can readily emulate the look of shibori. This beautiful bracelet was created by Kim Cavender, and looks to be inspired by a common folded and stitched technique used with silks in Shibori. Her notes on Flickr do point to dyed silk ribbons as the inspiration.
If you want to see the wide variety of Shibori techniques out there, just punch the term into Google images, Pinterest or Flickr and you will find yourself just drowning in all the luscious textures and colors shibori artists’ offer. And for more Kim Cavender, take a look at her Flickr pages and her blog.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
