The Past Comes to My Door
April 1, 2016
Inspirational Art
Some days, I just can’t believe how insanely lucky I am to be doing what I do. A few days ago I was blessed with these gifts from Germany. These are not just any gifts. If you read the Muse’s Corner article by Anke Humpert in the Winter 2015 issue of The Polymer Arts, or read the blog post about Sigrid Smolka last November, then you know some of this story.
Anke brought to our attention what must be the very first book of polymer techniques, written in 1974, and I was ever so thrilled that we were able to share Sigrid’s story. But now, I get to actually hold the book in my hands. I am so thrilled and have been just bursting with the implications of what I have so I just had to share.
Sigrid contacted me a couple of months ago and said she wanted to send me her book and a few other things. Not one to look a gift horse in the mouth, I thanked her profusely and patiently waited. Poor Sigrid has been having intermittent health issues so she was not able to get them off right away and eventually employed her friend Theresa to pack the intended items up for me.
Well, not only did she send the polymer book but also her book on air dry clay techniques and three of her polymer pieces from her years creating in the medium. And … she also sent prints and cards with her more recent computer paintings. Note the print on the left has a March 2016 date. Even with her ups and downs these days, she is still creating and sharing her art. I am amazed by this woman.
Since it seems too selfish to keep these to myself, I will be bringing the book and her polymer pieces with me to Eurosynergy in Bordeaux to share. I assume many people in the community are like me and would be thrilled to see pieces of our past in person. That is also why I sent Ellen Prophater and Sue Sutherland at Creative Journeys Sigrid’s contact information, so hopefully her work can be included in their amazing retrospective collection. It just wouldn’t seem complete without this earliest pioneer included.
Inspirational Challenge of the Day: Can you recall a piece or an artist from when you started in your present medium that greatly influenced your work? Can you recall what it was about their work that inspired you so greatly? Take that inspiring element or your sense of the artist’s work and design or create a piece that pays homage or utilizes what you got from them without copying anything they did.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Looking Back for Inspiration
March 30, 2016
Inspirational Art
A quick note on the Polymer Journey 2016 book … we’ve been able to extend the introductory sale through Friday, so if you haven’t reserved your copy or were waiting for payday, this is your chance! Go to the website today before the price goes up this weekend.
T
here are timeless techniques as well as timeless art. This easy but impressive looking technique, painting with mica powders on molded clay, was posted by Lilin in 2008. This particular construction harkens back to the art deco style with the enameled look of the butterfly wings against the stylized faces. It gives them an antique air. Lilin credits Donna Kato as her inspiration although she doesn’t say if that was from a book or class. But she gives her own brief instructions and tips, enough for you to get some ideas and run with a new design of your own.
The instructions for these are on this blog post. Lilin hasn’t posted since 2009 and I couldn’t find any reference to her moving her work to somewhere else. I am always curious how an artist progresses. It’s both encouraging and fascinating to see people improve their skills and to see what directions they chose. So I am curious. If anyone knows what Lilin is up to now, let me know and I’ll post an update here.
Inspirational Challenge of the Day: Find a new way to apply an old technique. Look through your older project books, back issues of magazines, or your favorite tutorial sites and find something you haven’t done in a while or never tried and use it with your present forms and color palettes. What do you do differently today that you didn’t when the tutorial was published or when you first used it? It’s interesting to see how your approach has shifted.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
___________________________________________
Tracking Our History
March 27, 2016
Inspirational Art
Okay … a couple little notes first …
Thank you to all of you who jumped in and pre-ordered a Polymer Journeys book. It was very heartening to see how many people are interested in this kind of book and I so hope you all enjoy reading it as much as we enjoyed putting it together. If you wanted to get in on the discounted pricing that we have through the 30th, just head over to the Polymer Journeys website.
For those of you who get this by email, you may have noticed a change in the look of your emails the last time or two. We moved to a new, more stable email service for you. You now have “like” buttons, so you can share it on 252 different social networks and online sharing services (Never knew there were so many!). Not all of them will transfer the image, if that is what you want to share, but you can click the post’s title in the email and it will take you to the post where you can share the URL address instead. If you have any questions or comments about the new format, just reply to the email and let us know!
This book has raised a number of discussions about looking at work retrospectively. I wanted to create Polymer Journeys as a series as a way to document what has been going on in polymer art as well as give us a more concrete way to understand where it’s going. The internet has endlessly muddled our sense of what is happening today because if something was posted anywhere at any point since the internet went public, it could pop up on someone’s screen for the first time, and it will seem like something new.
This mosaic is an example of something that came up while I was doing some research online that I had never seen before this past week. I thought it a beautiful example of how polymer can be used as a material for a traditional art form, giving the artist a bit more latitude and ease in creating the tiles for a traditional mosaic application. However, Geena Bregar, the creator of the mosaic, posted this some 13 years ago. I had never seen it and would have been at a loss as to guess its age if it weren’t for the dating of the blog post.
Of course, the question is, does it matter if we know when something was made? In many ways, no, it doesn’t. The strongest art continues to inspire, draw admiration, or causes someone to stop and ponder years, decades, or centuries after its creation. But I think the history of an art form, an artist, or even a piece of art itself has stories that we can learn quite a bit from or at least find wonder in them. I’ve been talking about how polymer has really reached out and touched so many other forms of art and is being used in conjunction with so many materials, but pieces like this are a good reminder that this influence and creative use of polymer is nothing new.
I think, really, polymer always been that kind of material. It’s just hard to get a good perspective on when and how this reach and influence occurred. If the Polymer Journeys books do well, perhaps we’ll be able to have a clear and educational perspective alongside a great collection of beautiful work to inspire us for years to come.
Inspirational Challenge of the Day: Look back at your oldest pieces in whatever medium you first created original works. Do you see new and inspiring elements even now? Take an element–a form, the way you used line, a technique, or color palette and combine it with your advanced knowledge and skill in a new design.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
___________________________________________
New Book Cover and Very Special Pre-Sale Offer for You!
March 25, 2016
Inspirational Art, The Polymer Arts magazine news
We set aside our usual art discussions today to announce the first big book project for TPA and the associated book publishing arm, Tenth Muse Publications–Polymer Journeys 2016 is just about ready for you! The release is set for April 14th.
This retrospective and peek-behind-the-scenes book is in its last phase of preparation for printing! Now that we have a publication date, we are offering you very anxious and enthusiastic folks a steep discount and a bonus to thank you for your patience and to give you the opportunity to get your copy straight off the press and into the mail!
We have an exclusive pre-sale price for just this one week. If you purchase the book on our website by March 30th, you get 30% off the cover price of $22.95! That’s all of $15.95 plus shipping.
It is also available in a digital format, which will be $12.95, but this week you can reserve your copy for just $9.95.
But wait … there’s more! (I’ve always wanted to say that!) I also worked out a way to reward our most enthusiastic supporters … be one of the first 250 people to pre-order a print copy and get a companion digital copy for FREE! Just put both a print and digital copy into your cart, then use this code to discount the digital copy: 1st250. (You’ll know others beat you to it if you get a note saying the discount is no longer valid.)
Want more info on what this book is? Go to the website here. In the meantime, enjoy the gorgeous cover art by Kathleen Dustin (top) and Jon Stuart Anderson (bottom).
We’ll be here if you have any questions for us. Otherwise, have a beautiful Spring and Easter weekend!
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
___________________________________________
- « Previous
- 1
- …
- 9
- 10
- 11
Noelia Contreras, stretches the idea of analogous color schemes by choosing pairs of colors that are in the same third of the color wheel then creating contrast by choosing tinted versions of one or both colors to create her stripes and spots.
As promised, this week we are going to start talking about creating color palettes. But first, because I love you all so much for following me as I blather about color and design, I want to make sure that you get in on the Damage Sale that is going on right now.
Damage Sale is on Now … and They’re Selling Fast!
Once every year or two, I pull out these boxes of publications that have been slightly damaged or marred and put them on sale, usually for 40-50% off. This time though, I marked it all down by 50-60%.
I started that yesterday and sold nearly half of them before lunch! Not wanting my blog readers to miss out, I went through my backstock boxes yesterday and pulled a number of imperfect copies that got shelf wear from storage so I’d have something to offer you.
Those got added to the sale inventory last night and so you all now have a fighting chance to grab some too. Just click here. But best be quick. It’s not quite toilet paper but I think there is a pandemic response thing going on here!
(If you got in on this Saturday but something was out of stock and is available now, buy it and I’ll combine the orders, refunding the difference in shipping if the order comes in by noon EST on Monday.)
Color Combo Considerations
Okay, now on to the business of color. Choosing colors to use in a piece takes into account quite a number of things but let’s hit on what I think are the three most important things to keep in mind:
Intention – What is your intention in creating the piece? What is the piece about? Go as far as writing it down and come up with some adjectives. Now, what colors go with those words and match your gut feeling about what you want this piece to be. I believe one should never ignore the gut but you do need to discern between instinct and taking the easy road or simply being dazzled by a color. That’s the hard part of using instinct but keep at it and hone it!
Importance – Should color play a major, supportive, or minor role in your design? I think this question is more important for color than for most design elements because we have such a strong and visceral reaction to color. There is usually a hierarchy of design elements in a piece and you benefit from intentionally deciding where color lands in that order. If you create a super tall vase, size is probably the major player in your design so do you want to draw attention away from that by making it a rainbow of bright colors? You absolutely might want to, but the size can make the colors even louder, which is great if that’s what you are after. However, if you want to focus on size because you want people to feel how monumental the piece is, one or two analogous colors in a supportive role might better support your intention.
Susan Dyer’s work puts color at the top of her design hierarchy with lots of contrast in hue and value but not a lot of contrast in saturation, going for bright and playful in most of her pieces like the one here.
Contrast – What level of contrast does your piece call for? High contrast creates high energy, low contrast creates calm, while something in between can be comfortable but still energized. Levels of contrast in a color palette can be created between color values (light versus dark), saturation (bright versus toned down), hues (complimentary colors), temperature (warm versus cool), and relative quantity (how much each color is used versus the others.)
Like everything else, how much contrast you choose should fulfill your intention but also, high or low contrast can be chosen to balance the energy of the work as needed. For example, you might have a busy piece with a variety of shapes and lines plus a lot of marks fulfilling your intention to create high energy but if you don’t want it too chaotic, you might use low rather than high contrast colors. Some intentional restraint in contrast will make the energy of the other elements feel more grounded. Alternately, you could go high contrast on the colors but go less busy on other design elements, especially if you deem color to be of high importance to the piece and don’t want it to be overlooked.
This necklace from Sandra Trachsel has low hue contrast using an analogous color scheme of yellow-green to blue-green but has value contrast between the two to give it a subtle energy but enough punch to really highlight the dimension of the interlocking geometric forms.
Okay, so, yeah, those are quite conceptual points and are very important to keep in mind when choosing a color palette but now, how do you even begin choosing colors? There are actually so many ways you can approach choosing colors for a piece and once you work with color intentionally and intelligently for a while, you will find your own way. But this week and next, I’m going to make some suggestions to get you started. Here is the first for this week.
Go with Your Gut
It’s going to sound like I’m saying this quite blithely but I’m serious about this – the most common way to start choosing colors is to go with your gut. Yeah, as mentioned, it may be something you have to hone but your instincts are really a great place to start and will help make your work truly your own. Now, you may think you have no instincts about color but we all do. We all react to color so the connections you make to color are in there and those connections are exactly what you need to find the colors you need for your work.
So, you can think about your intentions and see what colors come to mind or you can, with your intentions or associated adjectives running through your brain like a little chant, start shuffling through your colored art materials, a collection of color cards if you have them, or browse about online. Find yourself a base color to work off of. It doesn’t have to be the exact color yet but think of it as an anchor point for the time being.
Once you have that, you can start adding in other colors based on one of the following color wheel schemes. Keep in mind, this is not math. You don’t have to be exact in these color schemes. Think of them as templates that give you an idea of what colors to pair up with your anchor color.
You’re going to recognize a few these terms from the post on color relationships if you read that one. Those relationships for color mixing are also great starting points for choosing color palettes but I’m going to add a few more possible color combinations to your repertoire today.
Complementary – This color scheme involves focusing primarily on two colors, ones that are opposite each other on the color wheel. It provides great color contrast but, sometimes, these combinations create an almost uncomfortable tension. Fully saturated complements, when butted up against each other, will even cause a visual buzzing where they meet. Again, the tension between the complements is not a bad thing if that is what you are after but, because of this, this kind of color scheme should be carefully and quite intentionally chosen.
Analogous – this involves choosing colors that are near each other on the color wheel. These are usually two to four key hues so although you’re limiting yourself to one section of the color wheel you can still have quite the range.
Combining colors that are near each other on the color wheel creates palettes with low hue contrast and low or moderate value contrast, at least between the key hues themselves. If you choose colors that are desaturated (have reduced purity) due to tinting, shading, or toning of the color, that can increase the value contrast between analogous colors. So, you could create in blues and greens but go for a dark blue and a bright green so color value and saturation will be contrasted but since there analogous it will be relatively subtle. That’s why analogous color schemes are often found in moderate to low energy designs.
Triad or Square – I put these together because they are simply choosing a set of colors that are equidistant from each other on the color wheel. In a triad you are choosing three and a square you are choosing four colors. These create quite colorful and moderately high contrasting hue schemes. These color palettes tend to work best if one color is dominant (like your anchor color that you started off with) while the others play supporting roles in the color scheme.
Split Complementary – This can be a combination of two colors although I think it is best used as a three-color scheme. Here you choose one color and combine it with one or both colors to the side of the color’s true complement.
The TMA website scheme is yellow-green with its split complements magenta and blue (both leaning towards its true complement violet but still no visual tension.)
These create beautiful, high contrast color schemes but without the tension that direct complements can create. The combination remains lively and high in hue contrast but it feels much more refined than direct complements, triads, or squares. This is because you actually have a pair of basically analogous colors set against a high contrast one but not with high-tension contrasting hues. It’s kind of the best parts of all the previously mentioned schemes.
Monochromatic – The term monochromatic itself is synonymous with boring, I know, but this color scheme is anything but that. You may have just one base color but you then create a variety of shades, tints, and maybe even some tones of that one hue. Although it lacks hue contrast, you still get to play with saturation and value contrast so you can scale your energy level up and down with great control. I personally don’t think there is any other color scheme quite so sophisticated and clean as a monochromatic one so if your design is primarily about refinement, this color scheme should be seriously considered.
So, now you have one, somewhat structured way to start choosing colors. I would suggest this week that you play around with the various color schemes above. It could be as simple as pulling out your art materials and shuffling colors around on your tabletop to find complementary, analogous, triadic, and split complementary color schemes or continue practicing your color mixing by at least mixing up one luscious monochromatic scheme. Go with your gut and play with the colors as you feel you need to.
Not Much to Say
I know, I usually catch you up with what’s going on with me at this point, but it’s been a rough and tiring week for a variety of reasons and I am a bit talked out. I’ll tell you about drowning my sorrows in my minvan camper conversions project at a later date, okay?
I’ll just leave you pondering classic color combinations for now but next week we’ll going to get into some slightly more advanced ways of choosing color. Don’t worry, it’s nothing too difficult and you have all the tools to do it. In fact, I think a lot of you will be quite surprised at how easy and fun it will be. All this color study has been great fun, hasn’t it? I do hope so!
So, enjoy your week and fill it full of color!
Read More
Table by Alice Stroppel – www.polymerclayetc.com
So, have my suggestions thus far this month triggered any new ideas for fresh and exploratory directions in the studio? Well, if it hasn’t yet maybe it will this week. Even if this month’s ideas did have you looking into some previously uncharted territories, my theme today can work in conjunction with new materials, big new projects, and collaborations as well.
But first, at quick note … have you signed up for the new Virtual Art Box coming out next weekend? I do hope you plan to join us if you haven’t already. Not only will you get great material to keep you inspired and keep that creative wheel in your head turning all month long, I have a couple specials just for my art boxers including a freebie and deep discounts. 
I’ll be drumming up such specials from polymer and mixed media craft resources every month, most will be worth much more than you are paying for the art box itself. Plus, for just another week, you can get in on a forever lifetime discount, just because you jumped in both feet first with me on this new adventure!
Ok, back to pushing ourselves, or at least thinking about it, this month.
I was thinking that a really stimulating challenge would be to work in a form that you have not worked in before. You know, like if you normally do jewelry, try decorative arts or sculpture. If you do wall art try your hand at jewelry. But knowing most of you, you’ve probably dabbled in a quite a few different forms. So, I think we need to look at some unusual territories within various art forms you’ve already tried.
For instance, if you work in jewelry or other adornment, consider what types you haven’t tried creating. Hair adornments, perhaps? Ankle bracelets? Gauge earrings instead of pierced? Tiaras perhaps? How about lapel pins, cufflinks, tie bars, or bolo ties? Or just men adornment in general?
If you create or cover a lot of home decor, move beyond the vases and switch plates and look around for other hapless home victims like ceiling fixture pulls, trashcan lids, lampstands, or the finials on the ends of drapery rods. Really, nothing should be safe from your decorative touches.
I could probably make an insanely long list of oddball things that could either be made with their covered with polymer, but let’s just look at what a few people have done with some less than common forms and see if these pieces can’t push your ideas about what you can do with polymer clay.
Strange Polymer in a Strange Land
when sitting down to write this, I wandered around the house looking for things I thought could be made with polymer, but I hadn’t seen much of. It is actually kind of hard. I see a lot. But how about this– incense burners? Maybe people don’t burn incense quite as much as they used to and perhaps that’s why we don’t see people making them in polymer clay but, on the other hand, they’re so easy to make and you have a really wide range of possible shapes they could take. You would think a few people would be regularly popping some out. But they are hard to find.
For an incense burner, all you need is a stable form with a snug hole big enough for the incense sick to stand in and, preferably, a platform to catch the ashes. You can have incense stick standing straight up or have a long tray the stick would hang over or you can ignore the tray component completely. That should be easy, right? I do wonder if people hesitate to make incense burners with polymer because they believe the hot embers will singe the clay. I very much doubt that would happen, especially if you create a straight up stand type, where the ashes have a long way to fall. Here is one example of an incense burner created with cane petals by Israel’s Marcia of Mars Design. It’s a straightforward construction and a pretty, as well as functional, little piece
You should check out her dreidels as well. I’m not sure Marcia is working in polymer anymore, or at least she’s not posting, but she did have a lot of fun ideas you can find on her Flickr photo stream.
This next suggestion seems to be such a minimally explored area of adornment for a category with such a wide range of options. I’m talking about hair adornments. There are so many of them – barrettes, hair sticks, hairclips, hair combs, hair beads, bun caps and cages, hair slides, tiaras, head wreathes, hairbands, headbands, hair charms, hair rings, and hair twisters (a.k.a hair spirals or ponytail wraps). I am partial to hair slides myself because they can double as scarf and shawl pins so you can pull them out for all kinds of occasions. You can see how I make mine with the in-depth tutorial in the Polymer Art Projects – Organics book. Here’s another example of a hair slide from Emily May. Like the incense burners, as long as you planned for the basic form, one that allows a stick to pass through from one side to the other, you can create pretty much whatever you want.
And I did mention the nothing should be safe from polymer in the house? I can’t tell you how often I look up at window molding or the insets in a door panel or the trim on a cabinet and think “A bit of polymer could go right there!” Okay, maybe I’m pushing it for someone with limited studio time who wants to add sculptural elements, not canes or other veneers, to large immovable parts of my house. So, does may be a cane covered table sound more reasonable? That can be pretty ambitious as well but at least it can go with you if you move or can be sold. Just look at the table by Alice Stroppel that opens this post, or this amazing work by Bridget Derc.
Bridget’s canes are intense, as is her process, really. You have to skim through her Flickr photostream a bit (check out the bottom half of pages 3 and 4) but she posts a lot of photos of her process. It’s pretty amazing. And check out Alice’s website for more of her polymer table adventures.
Now, what if you’re into sculpture? How do you push the form there? I suppose if you normally sculpt “in the round” you can do bas-relief sculptures or vice versa. You could, of course, also venture into any of the other myriad areas of polymer and craft and apply your sculptural skills there, but this next piece might give you a whole other set of ideas. Why not, literally, take your sculpture somewhere you haven’t taken it before. Like outside maybe?
Tatjana Raum photographs her tree spirit sculptures as if they are in trees, although I think these are all in detached parts of trees like large swaths of bark and pieces of drift or dead wood. Even if they are not attached to a living tree, the tree material gives these other-worldly faces an unusual context that enriches the sculpture and how a viewer will perceive it. And what if you did put a bit of polymer art into a living tree? What a great surprise for a passerby!
Okay, that is all for today. I’ve got to start making these posts a bit shorter as I will have a lot to do for the Virtual Art Box each month. I am so super excited about what I have for our adventurous art boxers though. I don’t think it’s going to be what anyone is really expecting but I think it’s going to be a fantastic surprise, especially for readers who really loved The Polymer Arts magazine. I think we’re going to get to know each other a lot better and are in for a really creative year!
For now, have a wonderful and really creative week and I’ll see you next weekend!
Read More
So, here we are. The new year has begun, and we have 12 months and nearly 52 weeks of possibilities before us. Will you be changing the way you work or challenging yourself this coming year?
If you read last week’s post, you know I have mixed feelings about New Year’s resolutions, but I do believe in always having goals. Goals give you something to bounce out of bed for in the morning. Even small goals can get you up and going and keep you focused. However, this weekend I want to talk about making big goals, or particularly big projects.
This will mean different things to different people but whether or not the idea of doing something challenging in size or scope appeals to you, I think it’s just one of those things you should periodically ask yourself. Do I want to do something big, monumental, dramatic, or just drastically different? There is nothing wrong with saying no and just focusing on small, easily manageable projects. But I think you ought to ask the question just to be sure.
Nearly a decade ago, I interviewed Gwen Piña who, at the time, was the most prolific polymer artist I knew of in our community, with over 600 accounts she regularly fulfilled orders for. (She has since retired from polymer.) With all that work, I was really surprised when she took me to a side room to show me her personal projects. These were rather tall dolls and other pieces made from found objects and polymer. These were her personal projects which she didn’t always try to sell. Although they took time away from her primary wholesale work, she acknowledged that she needed that creative outlet to make her happy.
I think that is an important consideration. Not everything you make has to sell. Actually, unless your livelihood depends upon it, nothing you make needs to be sold. Go ahead – create for the sake of creating! How freeing is that idea? I bring this up because, many times, our big personal projects are not something that is either easy to sell or easy for us to part with.
So, setting aside the idea that everything you make has to support a business, let’s talk about big personal projects you might consider taking on to feed your soul.
A Big Way
Large, showy art pieces are often referred to as “statement” pieces. Big necklaces, towering vases, and wildly colorful wall sculptures can all be considered statement pieces when they outshine the wearer or dominate the room they occupy.
There is more latitude given for the functionality of craft art that is created as a statement piece. Awkward and uncomfortable collar necklaces, dangerously spiky brooches, and vases that are too monumental to hold any kind of flower arrangement are forgiven their lack of functionality in exchange for being a conversation piece or attention grabber. These can be great fun to create because you have fewer restrictions with that concern for functional construction set aside. If you’re looking for a bit more freedom in your designs this year, this might be something to explore.
But what if we change that definition of a statement piece and attach it to work that is primarily personal—making that kind of work a personal statement piece, as in you have something to say. You may just want to share your aesthetic views, or you may have opinions about the state of the world, or you might aim to share the emotion of a personal experience. These are all expressions of the artist being taken from inside themselves and put out into the world. That’s really at the core of what, arguably, defines something as a piece of art.
So how about YOU get noticed for some “big” piece of yours this year that is focused on expressing what you want to put out into the world? Being that this kind of project is more for you, you also get to define what a big project means to you. It could be literally large. It could also be small but so minutely thought out or detailed that it is big in terms of its process and scope. A big project could be based on a really delicate or difficult personal subject that you have previously found hard to share. It could also be a large collection of work instead of a single piece. Or a piece made up of a lot of smaller pieces. Do any of these ideas spark a fire in you?
Let’s look at just a few “big projects” other artists have taken in polymer.
Thinking Big
Heather Campbell goes big quite often. The piece of hers that opens this blog, Trippin’ in Spain, is 6 feet long! A handful of years ago, you might have seen the challenge she took on of making this insanely detailed polymer quilt called Keep Circling. Much of the texture and pattern is created with the attachment of many small, but easily replicated accents and objects as can be seen in the detail shot.
This piece is both a great approach to creating big, beautiful artwork in polymer and a metaphor for how to take on a big project or any daunting goal. Just do one small thing at a time and, if you just keep at it, next thing you know, you have something huge and amazing and that goal is reached.
A similar approach can be used in jewelry. A gloriously monumental bit of adornment does not have to be complicated. You can simply make a lot of something that you love to create and bring it together into a single magnificent piece. Gloria Danvers does a lot of this type of thing with polymer butterflies, leaves, and other caned shapes.
You know how I mentioned you could set your big goal to not just be one thing but that you might consider just creating a big collection? Well, what if you did both? That’s essentially what Jeffrey Lloyd Dever did with his Edensong Revisited installation piece from 2011. Taking dozens of individual pieces, he created a fascinating wall piece that you have to just keep looking at to take it all in.
Edensong Revisited | 2011 | Approx. 50”H x 42” W x 3.5” D | Polymer clay, steel wire, plastic coated wire, repurposed mixed media, latex paint | Photo credit: Jon Bolton/Racine Art Museum
The idea of something big for you though, might just be a project that’s really different and daring. If so, I would strongly suggest looking at artwork in other mediums for inspiration, not just polymer. I don’t know if anyone’s doing any really wild with ear cuffs like the ones below in polymer, but this is just one possible inspiration for what could be done with polymer and unique forms of jewelry. Check out this site for some wild pieces. No artists are listed although they do say these are handmade.
Sometimes your big idea can simply be sticking with a particular theme and really pushing yourself to see what you can do with it. I got a wonderful email from blog reader Suzanne Andrews, noting how the last post on having a goal really resonated with her. She’d already started on her goal to get focused this year by cleaning up her studio (and that’s a pretty big project for many of us, I know!) And then, she said she, “placed one photograph for reference on the wall in the studio. It is of a painting that speaks to me and my goal is to create pieces that belong with this painting.” I don’t know if she’ll make anything literally big or complex, but I love that idea of committing to that painting. It will give her a focus on something that she feels personally connected to, which can take some bravery. And that is a statement!
The Big Idea
So, whether or not you’re ready to take on something big, in whatever way you define it, or just want to play around this year, I’m hoping to make setting goals, or at least working on a focus, to be a bigger part of what we talk about throughout this year. It’s something I’m going to focus on with the Virtual Art Box, hoping for those of you who are up for it, to make what I share with you a more active kind of information exchange. Most of us aren’t reading this to simply pass the time, are we? This material and our creativity drive us to make art, right? So, let’s do that and make art that we are personally passionate about! I can’t tell you how fulfilling it is to take risks and push yourself. You won’t always succeed but, man, when you do, there’s nothing like it!
We’ll go over a few other ideas for possible goals and focuses you might want to take on over the coming year if you’re not sure what you want to do yet, if anything. There really is no rush so just let ideas wash over you until something grabs you.
Myself, I need to put a rush on some things. I think we finally have the technical end ironed out for the new Virtual Art Box so I’m getting ready to get sign ups set up on the website. Just need a few more tests. Then back to whipping the content into shape. That’s my focus this week so keep an eye out for newsletters for more info and I’ll update you on the blog this next week and as well. Get on this list here to be notified first for special discounts.
Nudge Sale is Still On!
Don’t forget we have that nudge sale going for another week or so. Almost everything is on sale so if you need more inspiration at your fingertips as you set yourself up for a great creative year, hop over to the website and snatch up a great deal on beautiful print and digital publications!
Happy first full work week of 2020! Hope its a beautiful and creative one!
Read More
Question for you … how much do you know about the origination of mokume gane? I’m guessing you have heard it has something to do with swords but did you know that the original metal technique was a lost art until quite recently? And did you know that what we do with polymer today has virtually nothing in common with the original technique? Mokume’s history and our adaptation of it has quite a few surprises in it, many of which could really open your eyes to its possibilities.
To understand how to create great mokume in polymer, it really does help to know a bit about where it came from, not to mention that its history is a great story of fortune, loss and redemption! Or something akin to that. Here are a few statements about its history. See if you can identify which statements are a true part of its tumultuous history and which are just fantastic claims:
- Mokume was a sword making technique that required folding metal over and over to give the blade’s edge a rippled appearance, like wood grain.
- The technique was developed for purely decorative purposes.
- It was originally used almost exclusively to create samurai swords to be carried around as status symbols.
- The technique became nearly extinct due to samurai swords becoming illegal to carry in Japan in the 19th century.
- The technique was resurrected by a female Japanese metalsmith when she started teaching it in the US in the 1970s.
Ok, so as you might have guessed, all these statements are true! But how does knowing this help? Well, the history may be more about appreciating it’s path to polymer but how it is created in metal can help you understand how our version of it works and what you can do with it.
Here … just take a look at one of the ways it is used in metalsmithing today. You can see in the phases of making a mokume ring, just how a mokume billet (that’s what metalsmith’s call a block of metal) is layered, twisted, pounded and bent into a ring. I never would have guessed that my mokume wedding band was created in this way considering how we approach it with polymer.
Now, what if you did the exact same thing with polymer? You could build a block, cut it, twist it, open it up and form it into a dimensional ring. Or bead. Or flattened donut. Or just a long bar bead, already patterned on all sides. Do you see how knowing the origin and how else it has been used can help you see the possibilities in polymer?
Neither the decorative sword nor the above metalsmithing approach sounds or looks anything like what we do in polymer though, does it? We don’t twist or even fold polymer mokume, it rarely looks like wood grain, and it certainly isn’t going to behave (or be as hard to work with) as steel and yet, we call it mokume. Now, how did that happen?
Like most borrowed techniques, what most of us have come to think of as polymer mokume evolved from an attempt to emulate it so it is not just some kind of translation of the technique. Slicing polymer “billets” (it’s too cool a word not to borrow too!) emulated grinding down the metal edge of a sword to reveal the visual drama of its layers. But because polymer can be manipulated in so many other ways, and because artists are a curious and exploratory lot, the technique, along with the clay, was also manipulated. This happened over and over until we ended up with the many variations we have today and even those often have little in common but the layering and the slicing.
Creating Uncommon Mokume in Your Studio
Has this started to get you thinking a bit differently about mokume? If it hasn’t let me just nudge you a bit more.
Consider this. With polymer, versus metal, we can:
- Work in a vast and myriad array of colors.
- Add translucent layers.
- Include inclusions in those layers.
- Cover the surface of layers with metal leaf, gilder’s paste, image transfers, or paint.
- Cut down through the billet to create lines and shapes.
- Use mica clays to create mica shift, an effect that adds color gradations and dimension around cuts and impressions.
- Create any kind of patterning we like, from loose and organic to very regular and controlled.
How many of these methods have you tried?
Uncommon Mokume Examples
Opening this post is a necklace by Carole Aubourg’s (aka Cacofim’) that can teach us a bit about mixing and matching patterns and letting background and foreground play together. She uses mokume in balance with the other, similarly slice-dependent techniques that appear, putting the focus on the design rather than on any one pattern or technique. Then the slices don’t always cover their beads, letting the background come through. There is a lot going on here but the variety of patterns are all brought together by a cohesive color palette that all parts partake of.
Here are some splendid green and cream dimensional beads by Eugena Topina that speak to how you can control of the slices. The mokume is created with high contrast colors and a prominent pattern that is sliced to a very even depth to keep the pattern whole. She then echos the pattern on the reverse side with carving. (And lucky us … she sells a project tutorial for this necklace here for a mere $13! Go get one if you are at all intrigued.)
I don’t want to discount what metalsmiths are doing with mokume these days either. So, no, this stylized heart pendant is not polymer but don’t you love how fine and close the mokume marks/impressions are? And why not go dense with the patterning? I have not the faintest idea how Juha Koskela created this in silver but if metalsmiths are getting wild with color in metals, I have to at least wonder a little bit if metal techniques, which have long influenced our work, might now be getting inspiration from polymer. I do like that idea, don’t you?
So, here’s another question … are you a mokume making fan and have you pushed what you know about the technique? If you have, why not share? Send links of your work in the comments below (click here if you are reading this in an email) so we can all see your work. I know I’d love to see it!
THINGS TO LOOK FORWARD TO:
Here are a few bits of general polymer news you might find of interest!
- This Tuesday is the near legendary half off sale at Munro Crafts. Check it out and stock up!
- Maggie Maggio and Lindly Haunani are teaching together for a 6 day spree of creativity and color, July 8th-13th. This is also partly a celebration of their highly influential book, Color Inspirations. If you like color (and who doesn’t?) and you can squeeze this into your schedule and budget, it’s a must.
- Deadline for submitting to the IPCA Awards is in just a few days. Apply here!
Do you have feedback for me?
Tell me what you think of this new format and blog. I wanted to put some more meat into it but you tell me … is it too long or did you enjoy getting lost in the history and ideas? If you liked it, just drop a quick “Works for me!” or “Keep it up” in the comments below (click here if you are reading this in an email then scroll down on the page that pops up.)
If you have ways I could change or otherwise improve the new blog format, just send a short “Shorter!” or “More pics, less text.” or “More instruction than history” or whatever in the comments below (click here if you are reading this in an email). I can’t please everyone but I really want this to be as useful and inspiring as it can be so help me make this what you want and hope for!
– Sage
Read More
I spent a lot of time looking for differently constructed clocks in polymer and couldn’t find much that really illustrated the point I was hoping to make. What I wanted was to show that a clock does not have to be on a flat surface. It can be made of many parts, attached or not, and fully dimensional. As long as you have something that can house or hide the clock mechanism while holding out the hands, the rest is wide open. You can have the hour markers designated by any form and attach them with sticks or wire or be free floating–whatever suits the piece and your inclination.
These two examples are commercial designs rather than polymer art but I think they give you the basics of this idea of moving beyond the flat clock face. Not only do these kinds of clocks make for really interesting wall pieces, they give you the freedom to use pieces you may already have such as large hollow beads, faux stones, unhung pendants, small figurines, flowers, etc.
As a gift, giving a clock that has separate pieces might be best attached to something that can be hung as one piece, like a backing of Plexiglas or painted plywood. Or include instructions for a template to mark on the wall where each piece goes. There is little to no construction to deal with but you will have to make concessions in the design for how the individual pieces will be hung. Alternately, go for a design where the elements are attached like the flowers you see here.
The sky is the limit with these kinds of designs. For more ideas, try searching “DIY clocks,” which was the keyword set that brought me to these two pieces. I hope these sparks some ideas and I look forward to seeing inventive clock designs this month!
Read More
In my search for clock inspiration, I veered a bit off the polymer path, but then again, I kept running into pieces that I thought were polymer but were not. Of course, pieces like this splendid celestial clock by Natalya Polekh could be created in a very similar fashion with polymer. Large textured sheets and fun with alcohol inks and mica powders could produce similarly stunning results so I took a closer look.
Natalya looks to be a well-known mixed media artist in Eastern Europe and Russia and when I say mixed, I mean all kinds of things. Her primary materials look to be various types of acrylic paint, dimensional and pearling paints, 3D gel, embossing paste, and glass and metal accents of different types. She works in texture, mosaics and layered media that is applied in such a way that knowing the materials is rather superfluous. She creates a beautiful complexity of texture and motif with shine and shimmer applied in abundance but always in a tasteful and often intriguing manner.
She does much more than clocks although she has done quite few of them. Take a look at her shop for more clock and textural ideas as well as very well priced tutorials on how she creates this work. Her VK.com page has more images.
Read More
Well, it’s that season again. While everyone else is shopping, crafters and artisans like yourself are working madly away on the stock that your audience demands to make their gift giving season the best one to date. For some of us, that audience is a retail account but for many more of us, it’s the far more intimidating circle of friends and family that we fret over. What do we do this year for gifts and surprises that we haven’t already done? Asking myself this question, I came up with a couple of ideas and in researching, clocks really hit a note for me. Any clayer of any level and any specialized set of techniques can create a clock that is both personal and expressive and everyone of every age can appreciate a lovingly created handmade clock.
Cane-covered clock faces are an easy project for clayers of any skill level. You can buy old clocks at the thrift store, or inexpensive ones at the big box store, or just a clock kit from a craft or hobby store that you put into your cane-covered clay sheets. Here is a fun and colorful, slightly off from the norm, cane-covered clock face for some initial inspiration. Mira Pinki Krispil is quite fond of cane covered decor but she always takes it one step beyond.
I like this piece because of the slight off-centeredness and the imagery in the center. It is more than decorated. The image in its center is intriguing with energetic lines bouncing back and forth through intertwined imagery. It’s just a great visual piece to start with. The fact that it’s a functional clock is a bonus.
Mira creates her colorful piece in south Israel and sells her work on Etsy. You can also see more of her designs by checking in on her Flickr photostream.
Read More
I thought I’d continue to keep it simple this week and still talk a little about line, the theme of the latest issue of The Polymer Arts that came out last weekend.
This simple pendant by Yuliya Zharova uses two elements to tell a story—line and dots. The form of the people here is nothing more thank tall lines with a variation in thick and thin. The dots on the top of this line make up the heads, and the small dots and large gold one somehow become stars and a moon. It’s quite amazing how much can be shown with so little detail. But lines, in particular, can do that. It is a nice reminder of how little we really have to put down to get our viewers to see what we have to convey.
It is also a nice reminder that line has characteristics and qualities of its own. They do not always have to be even. The way the line is formed can convey imagery, as we see here, or emotion. The articles on design and the technique tutorials on using lines and dots and soutache to create emotion and texture will help fill in more on those ideas when you get to reading our latest issue.
Yuliya’s compositions are almost all some variation online and dots and are all lovely in their understated design. See more of her work in her Etsy shop, Wild Onion Art.
Read More
I know this week will be a particularly busy one for many of us, especially in the US where we are kicking off the holiday season with our family-oriented Thanksgiving festivities involving way too much food and way too much shopping to follow it up the next day.
So for today, I thought I would harken to the theme of the just-released issue of The Polymer Arts, our Winter 2017 – Line, with a simple piece that represents a quality of line that I discuss in the article in this issue, “The Language of Line.” The simple circling forms, in the signature wavering organic forms of Anarina Anar, keep the composition centered and focused with a soft energy that continuously winds around in these soft but warm colors. Although the pendant is three-dimensional, it is the line the forms follow that gives the piece its balance and verve.
For more of Anarina’s colorful and energetic compositions, take a look at her Flickr site or her Etsy store. And to learn more about line, get a hold of your copy of this wonderful issue through our website if you have not seen it already or have it on its way to you.
Read More