The Need for Light and Dark
June 21, 2020
Inspirational Art, Tips and Tricks
Libby Mills uses value in color to create drama and depth with a mostly monochrome color palette.
I planned on talking about color variation this week but then it occurred to me, that we will need to talk about color contrast and you can’t talk about contrasting color without talking about value. So, I switched up my plans and we’re going to talk about the often neglected concept of color’s lights and darks, otherwise known as value.
The Light and Dark of It
So, what exactly is value? Value is simply what I just mentioned – the lightness or darkness of a color. This has nothing to do with their hue. Remember, hue works more like a category so mint green and hunter green both are a green hue, but mint has a light color value while hunter green has a very dark value.
The most important thing to remember about value is that it used to create contrast. For instance, purple has a much darker value than yellow, right? Used together, they are high in value contrast and, so, make a rather dramatic color palette. On the other hand, a dark magenta and forest green will have the same or similar middle-dark value. Putting them together will not create much value contrast. Although there is nothing wrong with that – they belong to complementary (opposite) hues on the CMY color wheel so they have contrast there – the lack of value contrast greatly reduces the potential of their dramatic contrast in hues.
To be blunt, similar values in rich colors such as dark magenta and forest green would just be boring. Now, if you choose a slightly darker magenta and a lighter green such as a burgundy and an jade, that will increase the value contrast and make a much more interesting color combination, as seen in the example image here. Below the color combinations you see them with the hue removed, leaving just their gray value. So that’s another way you can think about value – it’s the lightness or the darkness of the color without any color in it.
Seeing the Value
If you are a painter you might be shaking your head at the simplicity of the above explanation so let’s get a bit more precise. (If your head is already spinning a bit, just read through this but don’t worry about understanding it fully yet. You can come back to this later.)
Value is not just the lightness or darkness of a color. It is the lightness or darkness of what is SEEN. That’s an important distinction because the color of things we are looking at out in the world won’t stay constant as the light changes.
For instance, have you ever been around someone in a restaurant or on a train – some poorly lighted space – thinking their hair is dark brown only to see them step outside and find that it’s a rich red? Their hair didn’t change color. The light did.
The less light there is, the darker things appear, right? That seems obvious, but it’s really important to consciously understand that. It underlines one of the primary principles about creating art, especially imagery you’re trying to reproduce in any realistic manner – it’s not about what you think something is, it’s about what you actually see. So, if you are painting a portrait of me in a dark room, you would not paint me with the bright henna red and copper hair you know I have, because in the dim light, my hair would not actually look red or copper.
You may not be a painter but if you plan to build images in canes or are painting with polymer or create pretty much anything where you are developing a two-dimensional illusion of form and depth , you will be working with these kinds of value changes in color. Even if you don’t create imagery, the concept of how light changes the value of a color is useful for understanding what value is and why it is important in your designs.
You’ve actually learned about the importance of value if you’ve ever tried to draw a ball – to make it look round you have a very light spot where light hits the sphere directly, a dark side where the light doesn’t reach, and a gradation from light to dark between the two. Now, if that ball had color, like the blue ball you see here, you can tell that it’s a solid blue ball even though it actually has a variety of blues in this rendering of it. But I couldn’t just fill in a circle with one shade of blue and have you understand it is a ball. We need to see that change in color value – the swatches pulled from the blue ball are all the same hue of blue but are all different values – in order to see a dimensional form.
Without those changes of value – those lights and darks, those highlights and shadows – everything would just look flat. That is also why you don’t want to take a photo of an object with the light shining directly on the front facing view – it will kill the shadows, eliminate value changes, and make it difficult to perceive its form.
Intentional Value
So, a change in color value provides us with visual information, right? We like that. We like to be able to perceive if something is round or flat, textured or smooth. The contrast between light and shadow gives us that information. It is one of the reasons that we look for (mostly unconsciously) the contrast in value in works of art as well. Contrast, or the lack of it, can tell us a great deal.
In these beads by Jennifer Morris, there is very little contrast in value but these are not about drama so it makes sense. There are muted and pale colors with feminine floral motifs on round forms with low value contrast to match. The intention for this to be soft and quiet is obvious and with all the characteristics servicing that intention, she has designed some very lovely beads.
On the other hand, here are liquid polymer painted pieces by Lynn Yuhr who is clearly going for a bold and graphic look with wide ranging color values to support that objective.
So, don’t think that you must have a high contrast in the value of your colors. It can be high or low depending on what will best serve your intention. Value contrast also can bring attention to certain portions of your work or lead your eye around the piece.
For example, the fish on this clock by Gera Scott Chandler are much lighter in value than the background, bringing our focus to them first. The light value of the circles on the background subtly connect to the larger fish since they are similar in value so that your eye moves from fish to circles, going around the face of the clock.
Furthering Your Color Consciousness
So, before I get into how to manipulate values – something we will get into next week – I suggest you spend some time getting familiar with the values of color. I have a couple suggestions for you.
Go Grayscale
To better familiarize yourself with the actual value of colors, I find it helpful to look at colors in grayscale. A grayscale image will show you the actual value of colors, relative to the colors they are grouped with.
This means taking photos of your work in “black and white” mode or changing color images (yours or other people’s if you want) to grayscale in a photo editing app or software. Not all cameras have a black and white (or grayscale) mode. If you’re not sure, look up your camera model online along with “how to shoot black and white” and if no information comes up, then it probably doesn’t have that option.
The other way to do this is to edit the image. To do this on your computer, use Photoshop or whatever default photo editing software is available on your computer.
- In standard Photoshop, go to Image> Mode> Grayscale.
- In Microsoft Paint.net, you go to Adjustments> Black and White.
- If you are using another program, search the web for “how to convert image to grayscale” along with the name of your editing program.*
If you take a picture with a mobile device, you can usually edit it to grayscale directly in the phone or tablet.
- On an iPhone or iPad, select an image, hit “Edit”, tap the three overlapping circles icon, then scroll the little thumbnails of the photo over until it is in “mono”. Tap “Done” if you want to save it but keep in mind it will save over the original. If you do this accidentally, just follow the same steps and you’ll find the original version in that little row of thumbnails so you can convert it back.
- In Android, and pretty much any mobile device, you can use Google photos. Open your image in this app, tap it to bring up the icons and choose the three stacked lines. Slide the thumbnails over until it is in “Vogue” mode. You can also save it and undo it later.
*Note: There are quite a number of articles online suggesting you convert an image to grayscale by using a “saturation” adjustment. DO NOT do that for this value exercise. As we will discuss next week, saturation has nothing to do with color value. Reducing saturation tends to also reduce value, more for some colors than others. It will completely mess you up. You need a conversion to “grayscale”, “black and white”, or “mono”.
If using software and apps is just too much of a bother or you don’t have a software program, here is a free online service. You just click the file icon, browse to and open the file, and it will appear in the browser window in grayscale. You can save it from there by hitting the floppy disk icon.
Once you have these grayscale images, start looking at how much value contrast shows in the images.
- Is there a lot of contrast or all the values fairly close?
- Does the amount of value contrast match with the probable intention or feel of the piece?
- Do any of the colors set next to each other just blend into one another because the values are so close? If so, do you think that works for the piece or do you think more value contrast could help it? (We’ll talk more next week about how to choose alterantives when you want a different value.)
Just make yourself more familiar with value. You can also use this value scale (click on it, then print it out) to check values of colors or pieces you have. You can lay the scale next to a color and see which value you think is the closest. Then take a photo of the scale next to the color, convert it to grayscale, and see how close you came to matching the color to the right value. Do this a few times and you’ll be seeing in values quite quickly!
Get a CMY Color Wheel
You know how I recommended you get a CMY color wheel? Well, the more I work on these articles, the more I wish you ALL had the CMY color wheel from the Color Wheel company. I can’t tell you how many times I reference mine, and I am convinced that when we get into how to use these color concepts to pick color palettes and to mix color, having this particular CMY color wheel will make it all such a breeze.
No, they’re not paying me to push this. I have met the owners and they are a fantastic little family company (who worked with the polymer community’s very own Maggie Maggio to help build a CMY based grade school art curriculum, by the way) but more than that, they are so intensely passionate about color and education. That’s why they’ve done such a superior job with this particular color wheel.
So, if you haven’t gotten one yet, you can buy it directly from the company for $9 (including shipping in the US) and you will have it within 5-7 business days. It’ll be the best $9 you ever invested for your creative journey. Outside the US, I am not sure where it is best to get them but you can search for “Color Wheel Co CMY” and look for this wheel:
https://colorwheelco.com/buy-now/product/cmy-primary-mixing-wheel-7-3-4-diameter/
Well, I hope you’ve enjoyed this immersive in value. I have to say I am always surprised at how much there is to talk about each characteristic of color. These articles really could be much shorter but I don’t know if you would walk away really understanding and feeling confident about these concepts. We retain concepts better when we spend some time with them. I’m hoping these articles do that for you! If you have any thoughts or suggestions about the length or detail of these articles, I am always up for hearing them. Just reply to this if you get it by email or write me through the website.
Wondering about my references to Intention? Or how to support this content?
Read what so many VAB members have said was a life altering (or game changing or mind opening) set of articles on Intention in the February edition of the Virtual Art Box and catch up on the concept of marks, lines, and shape too. And they are all on SALE, 25% off right now – no promo code needed. I’m also having a 20% off sale on ALL books!
The purchase of a box would help support this free content that I am creating now as well as give you a stronger base for the conversations we will be having going forward. You can help me keep the lights on by making a purchase of any of the publications I have on the Tenth Muse Arts website or by making a one-time or monthly contribution here.
Thank you for your past, present, and future support!
Tactile Form
May 24, 2020
Inspirational Art
Craft art is visual right? But is it just visual? One of the unique things about craft items in the world of art is that a majority of it is functional which means it is often handled which makes it not only visual but often tactile. When someone mentions tactile characteristics, you probably think texture, right? Well, our tactile sensation perceives form as well as texture (and density, temperature and even weight but that’s another set of subjects.) Functional objects and jewelry in particular are pieces that are regularly touched so people experience these works both visually and tangibly, even if the sense of touch is not always recognized as part of their enjoyment of the piece. However, the tactile experience can make a huge difference between people liking your work and being utterly in love with it.
Think about how often you touch adornment when you wear it – pendants, necklaces, earrings, and bracelets, are often where our hands go when we are nervous, contemplative, or excited. Functional objects often have parts that are specifically designed for our hands such as handles, knobs, and grips, or are formed for handling such as the neck of a vase or width of a cup. Because of these interactions, you have an opportunity in the form of such pieces to further express your intention.
I realized as I started to research potential pieces for this post, it can be really hard to “show” you things that feel good in the hand. So, we’re just going to have to guess and imagine it!
All the Feels
It’s interesting to note that the characteristics we might associate with visual shapes and forms often translates to our perceptions through touch. For instance, full, round forms, such as spheres and pods will relate the same characteristics as visual curvy shapes and forms – that primarily being comforting and feminine qualities. Imagine wearing this spherical bracelet by Bettina Welker. Even with the energy of the cracks and directional streaks paired with a deep black and the dramatically contrasting yellow-green, the roundness, both visually and tangibly, bring down that energy and drama to a refined and rather relaxed level.
If you want to encourage people to touch your work, a soft, smooth surfaces and smooth, knobby ones are pretty irresistible. Exploration of the texture may often be the original draw to touch something, but further tactile exploration can be encouraged by the form, especially those that lead the fingers around through amorphous, curvy structures or strong but flowing angular forms. For comparison with Bettina’s example, take a look at the opening image, a bracelet by Jana Roberts Benzon, which is primarily curvy but has sharp aspects to it in the form of those regular incisions. It’s a great combination as the fingers can follow a winding curvilinear path through the valleys of the bracelet’s form with vibratory sensations from running over the cut clay, making those cuts more texture than form but however it might be classified, those two elements certainly work well together.
Flowing forms, even when sharp and angular, are extremely alluring when it comes to touch. Tell me you don’t want to run your fingers along the ruffling but angular fins of this vessel by Melanie West. Honestly, it’s impossible not to touch Melanie’s polymer work if it’s in reach. Her forms are full and inviting, begging to be nestled in the palm of your hand, for details to be explored with your fingertips, and the softness of her unfathomably smooth matte surfaces … just dreamy! Seriously.
I don’t think you can come up with any object handled more than hand tools and writing implements. When decorated with polymer, the handles of most of these are simply covered rather than intentionally formed. Take pens for instance – polymer pens are typically cylindrical forms that are covered with a sheet of treated polymer or cane slices but why stick with just the cylinder? Look at these pens by Jana Lehmann. They’ve gone from cylinder to pod like with additional forms added for visual and tactile interest.
Now, I believe Jana’s pens are created over a standard wood form as they all have that basic elongated pod shape but since polymer is so sculptural, there’s no reason why functional objects you are decorating with polymer can’t be reformed. These spoons by Jacques Vesery are wood rather than polymer, but it would be no big thing to sculpt such enticing handle forms.
Okay, enough of just looking at the forms of artwork – why not search out forms in your house or around your yard that you like to touch and hold in your hand. Most likely you’ll find that you are drawn to the more rounded and curvy forms. They are simply more comfortable to touch then angular or blocky forms but that doesn’t mean when creating a form that will be touched by the user that it needs to be round or curvy. Sometimes comfortable is not what you’re trying to express. Other times you’ll want to focus on the visual aspect and not encourage people to touch so much as look at it. It all depends on your intention.
So, go be a 3-year-old and touch everything!
Some Big News
So, I’m going to be making some changes again, mostly to your advantage. The gist of it is that I’ve decided to share the upcoming planned content for FREE!
I’m doing this both because I’m not comfortable with the VAB’s automated subscriptions costs in a time when things are so uncertain. Nearly all the people who have had to cancel the last month or two are writing to apologize for not having the budget for it and lament missing out. That has made me terribly sad, especially for some of my long-time readers who have lost jobs and income.
The other reason is that with my increasing physical limitations, and no staff to pick up the slack, hitting deadlines are hard and quality suffers which isn’t fair for paying subscription members. But I want to create content—I love doing this stuff. If it is not paid for, though, I will have more leeway to take the breaks I need or change what I put out.
So, starting in June, I’ll be posting VAB content here, on the blog and have it sent by email to VAB and blog subscribers.
If you are a present subscriber, you should have received an email Friday night/Saturday morning to explain how that affects you. If you do not see this notice, please check your spam or junk mail folders first but if not there, write me to get the notice resent.
For those want to contribute to the cause …
Creating and getting out the free content will still cost money and time but with my husband still working, I feel secure and fortunate and am happy to share what I can. I am, however, happy to get a boost from those who want to support my work.
The best way, honestly, is to buy yourself an inspiring book or magazine back issue on my website where you can further get to know other artists and community businesses. It’s a real win-win-win. I have also set up a contribution option on the website for those who want to support the free work I do but have everything they want from the shop. Between steady sales and a contribution here and there, I can keep writing, pay the digital services and my tech guy, maybe hire back my proofreader, and support my need for dark chocolate!
There’s a bit more news but I will wait to post that in the newsletter coming out this week. If you aren’t signed up for it, I’ve been adding tips, bits of community news, and just fun creative finds to make you smile. You can sign up for it here if you don’t get it already.
So, with that, I am off. Still waging war with the ground squirrels in the veggie garden so getting my outdoor time and the movement my neck needs to not stiffen up although I have to watch how much I use my right arm still. Yesterday, I planted the last round of sweet potato slips which are up on a hill, hidden behind the ice plant, and will finish this weekend relegating the green beans and zucchini to pots up where the dogs like to hang out and the squirrels do not. I’ve given up on the cantaloupe though. That’s a little depressing but everything eats those leaves! So, wish me luck!
As always, I wish you all a safe and healthy week ahead!
Changing Forms
January 26, 2020
Inspirational Art, Polymer community news, The Polymer Arts magazine news
Table by Alice Stroppel – www.polymerclayetc.com
So, have my suggestions thus far this month triggered any new ideas for fresh and exploratory directions in the studio? Well, if it hasn’t yet maybe it will this week. Even if this month’s ideas did have you looking into some previously uncharted territories, my theme today can work in conjunction with new materials, big new projects, and collaborations as well.
But first, at quick note … have you signed up for the new Virtual Art Box coming out next weekend? I do hope you plan to join us if you haven’t already. Not only will you get great material to keep you inspired and keep that creative wheel in your head turning all month long, I have a couple specials just for my art boxers including a freebie and deep discounts. 
I’ll be drumming up such specials from polymer and mixed media craft resources every month, most will be worth much more than you are paying for the art box itself. Plus, for just another week, you can get in on a forever lifetime discount, just because you jumped in both feet first with me on this new adventure!
Ok, back to pushing ourselves, or at least thinking about it, this month.
I was thinking that a really stimulating challenge would be to work in a form that you have not worked in before. You know, like if you normally do jewelry, try decorative arts or sculpture. If you do wall art try your hand at jewelry. But knowing most of you, you’ve probably dabbled in a quite a few different forms. So, I think we need to look at some unusual territories within various art forms you’ve already tried.
For instance, if you work in jewelry or other adornment, consider what types you haven’t tried creating. Hair adornments, perhaps? Ankle bracelets? Gauge earrings instead of pierced? Tiaras perhaps? How about lapel pins, cufflinks, tie bars, or bolo ties? Or just men adornment in general?
If you create or cover a lot of home decor, move beyond the vases and switch plates and look around for other hapless home victims like ceiling fixture pulls, trashcan lids, lampstands, or the finials on the ends of drapery rods. Really, nothing should be safe from your decorative touches.
I could probably make an insanely long list of oddball things that could either be made with their covered with polymer, but let’s just look at what a few people have done with some less than common forms and see if these pieces can’t push your ideas about what you can do with polymer clay.
Strange Polymer in a Strange Land
when sitting down to write this, I wandered around the house looking for things I thought could be made with polymer, but I hadn’t seen much of. It is actually kind of hard. I see a lot. But how about this– incense burners? Maybe people don’t burn incense quite as much as they used to and perhaps that’s why we don’t see people making them in polymer clay but, on the other hand, they’re so easy to make and you have a really wide range of possible shapes they could take. You would think a few people would be regularly popping some out. But they are hard to find.
For an incense burner, all you need is a stable form with a snug hole big enough for the incense sick to stand in and, preferably, a platform to catch the ashes. You can have incense stick standing straight up or have a long tray the stick would hang over or you can ignore the tray component completely. That should be easy, right? I do wonder if people hesitate to make incense burners with polymer because they believe the hot embers will singe the clay. I very much doubt that would happen, especially if you create a straight up stand type, where the ashes have a long way to fall. Here is one example of an incense burner created with cane petals by Israel’s Marcia of Mars Design. It’s a straightforward construction and a pretty, as well as functional, little piece
You should check out her dreidels as well. I’m not sure Marcia is working in polymer anymore, or at least she’s not posting, but she did have a lot of fun ideas you can find on her Flickr photo stream.
This next suggestion seems to be such a minimally explored area of adornment for a category with such a wide range of options. I’m talking about hair adornments. There are so many of them – barrettes, hair sticks, hairclips, hair combs, hair beads, bun caps and cages, hair slides, tiaras, head wreathes, hairbands, headbands, hair charms, hair rings, and hair twisters (a.k.a hair spirals or ponytail wraps). I am partial to hair slides myself because they can double as scarf and shawl pins so you can pull them out for all kinds of occasions. You can see how I make mine with the in-depth tutorial in the Polymer Art Projects – Organics book. Here’s another example of a hair slide from Emily May. Like the incense burners, as long as you planned for the basic form, one that allows a stick to pass through from one side to the other, you can create pretty much whatever you want.
And I did mention the nothing should be safe from polymer in the house? I can’t tell you how often I look up at window molding or the insets in a door panel or the trim on a cabinet and think “A bit of polymer could go right there!” Okay, maybe I’m pushing it for someone with limited studio time who wants to add sculptural elements, not canes or other veneers, to large immovable parts of my house. So, does may be a cane covered table sound more reasonable? That can be pretty ambitious as well but at least it can go with you if you move or can be sold. Just look at the table by Alice Stroppel that opens this post, or this amazing work by Bridget Derc.
Bridget’s canes are intense, as is her process, really. You have to skim through her Flickr photostream a bit (check out the bottom half of pages 3 and 4) but she posts a lot of photos of her process. It’s pretty amazing. And check out Alice’s website for more of her polymer table adventures.
Now, what if you’re into sculpture? How do you push the form there? I suppose if you normally sculpt “in the round” you can do bas-relief sculptures or vice versa. You could, of course, also venture into any of the other myriad areas of polymer and craft and apply your sculptural skills there, but this next piece might give you a whole other set of ideas. Why not, literally, take your sculpture somewhere you haven’t taken it before. Like outside maybe?
Tatjana Raum photographs her tree spirit sculptures as if they are in trees, although I think these are all in detached parts of trees like large swaths of bark and pieces of drift or dead wood. Even if they are not attached to a living tree, the tree material gives these other-worldly faces an unusual context that enriches the sculpture and how a viewer will perceive it. And what if you did put a bit of polymer art into a living tree? What a great surprise for a passerby!
Okay, that is all for today. I’ve got to start making these posts a bit shorter as I will have a lot to do for the Virtual Art Box each month. I am so super excited about what I have for our adventurous art boxers though. I don’t think it’s going to be what anyone is really expecting but I think it’s going to be a fantastic surprise, especially for readers who really loved The Polymer Arts magazine. I think we’re going to get to know each other a lot better and are in for a really creative year!
For now, have a wonderful and really creative week and I’ll see you next weekend!
Go Big or Go Personal
January 5, 2020
Inspirational Art
So, here we are. The new year has begun, and we have 12 months and nearly 52 weeks of possibilities before us. Will you be changing the way you work or challenging yourself this coming year?
If you read last week’s post, you know I have mixed feelings about New Year’s resolutions, but I do believe in always having goals. Goals give you something to bounce out of bed for in the morning. Even small goals can get you up and going and keep you focused. However, this weekend I want to talk about making big goals, or particularly big projects.
This will mean different things to different people but whether or not the idea of doing something challenging in size or scope appeals to you, I think it’s just one of those things you should periodically ask yourself. Do I want to do something big, monumental, dramatic, or just drastically different? There is nothing wrong with saying no and just focusing on small, easily manageable projects. But I think you ought to ask the question just to be sure.
Nearly a decade ago, I interviewed Gwen Piña who, at the time, was the most prolific polymer artist I knew of in our community, with over 600 accounts she regularly fulfilled orders for. (She has since retired from polymer.) With all that work, I was really surprised when she took me to a side room to show me her personal projects. These were rather tall dolls and other pieces made from found objects and polymer. These were her personal projects which she didn’t always try to sell. Although they took time away from her primary wholesale work, she acknowledged that she needed that creative outlet to make her happy.
I think that is an important consideration. Not everything you make has to sell. Actually, unless your livelihood depends upon it, nothing you make needs to be sold. Go ahead – create for the sake of creating! How freeing is that idea? I bring this up because, many times, our big personal projects are not something that is either easy to sell or easy for us to part with.
So, setting aside the idea that everything you make has to support a business, let’s talk about big personal projects you might consider taking on to feed your soul.
A Big Way
Large, showy art pieces are often referred to as “statement” pieces. Big necklaces, towering vases, and wildly colorful wall sculptures can all be considered statement pieces when they outshine the wearer or dominate the room they occupy.
There is more latitude given for the functionality of craft art that is created as a statement piece. Awkward and uncomfortable collar necklaces, dangerously spiky brooches, and vases that are too monumental to hold any kind of flower arrangement are forgiven their lack of functionality in exchange for being a conversation piece or attention grabber. These can be great fun to create because you have fewer restrictions with that concern for functional construction set aside. If you’re looking for a bit more freedom in your designs this year, this might be something to explore.
But what if we change that definition of a statement piece and attach it to work that is primarily personal—making that kind of work a personal statement piece, as in you have something to say. You may just want to share your aesthetic views, or you may have opinions about the state of the world, or you might aim to share the emotion of a personal experience. These are all expressions of the artist being taken from inside themselves and put out into the world. That’s really at the core of what, arguably, defines something as a piece of art.
So how about YOU get noticed for some “big” piece of yours this year that is focused on expressing what you want to put out into the world? Being that this kind of project is more for you, you also get to define what a big project means to you. It could be literally large. It could also be small but so minutely thought out or detailed that it is big in terms of its process and scope. A big project could be based on a really delicate or difficult personal subject that you have previously found hard to share. It could also be a large collection of work instead of a single piece. Or a piece made up of a lot of smaller pieces. Do any of these ideas spark a fire in you?
Let’s look at just a few “big projects” other artists have taken in polymer.
Thinking Big
Heather Campbell goes big quite often. The piece of hers that opens this blog, Trippin’ in Spain, is 6 feet long! A handful of years ago, you might have seen the challenge she took on of making this insanely detailed polymer quilt called Keep Circling. Much of the texture and pattern is created with the attachment of many small, but easily replicated accents and objects as can be seen in the detail shot.
This piece is both a great approach to creating big, beautiful artwork in polymer and a metaphor for how to take on a big project or any daunting goal. Just do one small thing at a time and, if you just keep at it, next thing you know, you have something huge and amazing and that goal is reached.
A similar approach can be used in jewelry. A gloriously monumental bit of adornment does not have to be complicated. You can simply make a lot of something that you love to create and bring it together into a single magnificent piece. Gloria Danvers does a lot of this type of thing with polymer butterflies, leaves, and other caned shapes.
You know how I mentioned you could set your big goal to not just be one thing but that you might consider just creating a big collection? Well, what if you did both? That’s essentially what Jeffrey Lloyd Dever did with his Edensong Revisited installation piece from 2011. Taking dozens of individual pieces, he created a fascinating wall piece that you have to just keep looking at to take it all in.
Edensong Revisited | 2011 | Approx. 50”H x 42” W x 3.5” D | Polymer clay, steel wire, plastic coated wire, repurposed mixed media, latex paint | Photo credit: Jon Bolton/Racine Art Museum
The idea of something big for you though, might just be a project that’s really different and daring. If so, I would strongly suggest looking at artwork in other mediums for inspiration, not just polymer. I don’t know if anyone’s doing any really wild with ear cuffs like the ones below in polymer, but this is just one possible inspiration for what could be done with polymer and unique forms of jewelry. Check out this site for some wild pieces. No artists are listed although they do say these are handmade.
Sometimes your big idea can simply be sticking with a particular theme and really pushing yourself to see what you can do with it. I got a wonderful email from blog reader Suzanne Andrews, noting how the last post on having a goal really resonated with her. She’d already started on her goal to get focused this year by cleaning up her studio (and that’s a pretty big project for many of us, I know!) And then, she said she, “placed one photograph for reference on the wall in the studio. It is of a painting that speaks to me and my goal is to create pieces that belong with this painting.” I don’t know if she’ll make anything literally big or complex, but I love that idea of committing to that painting. It will give her a focus on something that she feels personally connected to, which can take some bravery. And that is a statement!
The Big Idea
So, whether or not you’re ready to take on something big, in whatever way you define it, or just want to play around this year, I’m hoping to make setting goals, or at least working on a focus, to be a bigger part of what we talk about throughout this year. It’s something I’m going to focus on with the Virtual Art Box, hoping for those of you who are up for it, to make what I share with you a more active kind of information exchange. Most of us aren’t reading this to simply pass the time, are we? This material and our creativity drive us to make art, right? So, let’s do that and make art that we are personally passionate about! I can’t tell you how fulfilling it is to take risks and push yourself. You won’t always succeed but, man, when you do, there’s nothing like it!
We’ll go over a few other ideas for possible goals and focuses you might want to take on over the coming year if you’re not sure what you want to do yet, if anything. There really is no rush so just let ideas wash over you until something grabs you.
Myself, I need to put a rush on some things. I think we finally have the technical end ironed out for the new Virtual Art Box so I’m getting ready to get sign ups set up on the website. Just need a few more tests. Then back to whipping the content into shape. That’s my focus this week so keep an eye out for newsletters for more info and I’ll update you on the blog this next week and as well. Get on this list here to be notified first for special discounts.
Nudge Sale is Still On!
Don’t forget we have that nudge sale going for another week or so. Almost everything is on sale so if you need more inspiration at your fingertips as you set yourself up for a great creative year, hop over to the website and snatch up a great deal on beautiful print and digital publications!
Happy first full work week of 2020! Hope its a beautiful and creative one!
Mixing and Mingling, New Cover, & 33% off Back issues
March 24, 2019
Inspirational Art, Polymer community news, Tips and Tricks
We have a bit of business to do first today but it’s exciting business! I wanted to share with you the next cover of The Polymer Studio, coming late April.
We are thrilled to include projects from Cynthia Tinapple, our featured and interviewed artist for this issue, as well as Christi Friesen, Kathy Koontz, Elena Mori, the Mitchell sisters, Deb Hart, and Wendy Moore. Also, tips, tricks, and other bits of wisdom from Debbie Crothers, Ginger Davis Allman, and little old me. And you won’t want to miss the tour of Christine Dumont’s studio, complete with a conversation about her space and process, which I think you’ll find very intriguing.
All this and more, just a month away! Support our projects, this blog, and the betterment of your own polymer journey, of course, or just because you’d like to look at all the pretty things tucked into those pages, by subscribing to The Polymer Studio here.
(Be sure to scroll down to the last section for the 33% off sale stuff.)
A Fine Mix-up
So, did you get a chance to look through the winning entries for the IPCA awards? Here’s the link again if you didn’t see them. The winning entries are just beautiful and maybe even a bit surprising. If you saw it, did you notice any trends or changes in trends and what was presented? I thought it was interesting that there were a lot of mixed-media pieces where polymer clay might have been the focus, but other materials played large roles in important design aspects and visual impact of the work.
One of the reasons I find this so interesting is that the idea of expanding into other materials seems to be a regular conversation myself and many other people are having. I couldn’t say exactly what that means but I do believe that polymer, with its unparalleled flexibility for combining with other materials, has kind of come of age where our exploration of what it can do is being placed on the back burner in order to focus on artistic expression. I look at these mixed-media pieces in the awards and other pieces I find during my research and general perusing online, and it seems that we are seeing more instances where polymer centric artists decide what they want to make and then determine the best materials for the work rather than push to see if polymer can be used for most, if not all, of the components of a piece. Or perhaps I am just hoping this is the case because I would love to see more folks focused on personal expression will rather than letting our obsessive, but understandable, infatuation with the material determine our creative parameters.
Of course, for most of us who work in polymer now, this colorful, durable, and chameleon material will remain our primary love and, regardless of other options, we will often still try to do as much as we can with polymer, if just to see if we can push it a little bit farther. But, opening oneself up to the possibilities of combining it with other materials in major ways will allow us, and even the viewer, to focus more on the design and expression and less on the material itself, which will let the artist’s expression, vision, creativity, and aesthetic really shine. I find this very exciting!
So, this week, let’s look at some of the mixed-media pieces where other materials play a primary role alongside polymer. This could be very helpful for you if you have felt like you’re in a rut or are too often hitting technical or design walls in your work. Trying out a different material may just be the thing to inject you with new enthusiasm and, possibly, send you down a new path with your artwork.
Mixed Directions
Let’s first look at some of the winners of the IPCA awards and in many ways that other materials have been mixed in.
This first piece is both a mixed-media and a mixed artist piece. Ellen Prophater or worked with Sherry Mozer, a glass artist, led to the use of the black glass piece with its shades of green within reflected in the mokume polymer it sits upon. It is set in a silver bezel and accented with Swarovski crystals. Both the mokume and the glass show off a subtle transparency, drawing the connection between the two along with the green cast colors. It’s a nice reminder that collaboration can also push us in new directions making new discoveries in our work and even ourselves and our friendships.
Donna Greenberg just killed it as the professional mixed-media category. This wall piece is called Wedgewood Wave but the word that keeps coming to mind for me is swoon. Not just because I feel like swooning, it’s just so gorgeous, but that’s also the word that comes to mind from that fabulous flow of energy through those waves, back into the pool of blue. Those waves are paper, but the application of color and shape are similar to the polymer pieces so the different materials feel cohesive. This is definitely one of those cases where another medium was the better choice. Trying to create those waves in polymer would’ve been just silly, even though it could be done. The paper gives a lighter feel to the overall piece as well as a light and easy flow to the visual movement. She also used Ultralight polymer alongside the Arches cold press paper, acrylic gouache paints, watercolor pencils, and Apoxie paste, each material fulfilling its purpose in a way that another material would not have been as successful with.
With the issue of the environment heavy in many of our minds, we are seeing a lot of exploration into found or recycled or upcycled items. Sarah Machtey offered up this steam punk pouch necklace with removable magnifying glass for the mixed media category of the awards with a bit of all of that. The front and back of this small pouch is from a soda can turned inside out – you can still see the printing of the soda can on the inside – but she embossed the can with decorative lines and used mica powder infused liquid polymer in the recesses to make them stand out. The band across the top is upcycled copper from a renovation project while the side leaves and earrings are polymer clay. Not sure if the magnifying glass was bought or found but it certainly could have been reused from something else.
The pouch is 7” (18 cm) in height from the top edge to the bottom of the magnifying glass, so it’s no small bit of tin on there. Of course, she could have used polymer to create the metal sections but it would’ve been a bulkier piece. The tin keeps the weight down as well as adding some structural strength that would only have been accomplished with a much thicker wall of polymer.
Keep in mind, when we are talking mixed-media it doesn’t necessarily have to be another art material. For instance, I combined poetry with photos of polymer in a challenge last year that I was posting on my personal Instagram page. Other people mix it up by installing the work in unusual places so that the what is placed on becomes part of the artwork such as fairy doors installed on walls or in tree trunks or tiles installed into a kitchen backsplash. Rachel Gourley takes it just a touch further, installing her little collections so that they recede into the landscape. She scatters her polymer elements out and about in natural settings, looking much like organic growths but unexpected in their color, shape, and placement.
Putting Together Your Own Mixer
This week, I didn’t pull any tutorials for you to try because it would have to be a mad, a long list of other materials to give you any real idea of your options. Instead, I might suggest that you keep your eye open for what other polymer artists are doing with other materials. Perhaps one of the above ideas piqued your interest already. If so, research that other material and find ways to acquire or hone your skill in that medium. Just put “polymer clay and [fill in the blank with the material you’re curious about]” into the search bar on Pinterest, Instagram, Flickr, or Google images and see what pops up. Add the word “tutorial” to see what offerings there are online. I’m sure there will be plenty of inspiration.
You can also grab your Spring 2015 – Diversity issue of The Polymer Arts or the Convergence themed issue from Spring of 2016, both of which have a ton of ideas around using other materials with polymer. You can see the table of contents for all back issues of The Polymer Arts on this page to check out what these issues have to offer. Then, if you don’t have the issues, you can order them on the website.
In fact, let’s have a sale!
Why don’t you grab a few back issues and take a full 33% off 3 or more! Good on digital or print, I’ll keep this up until next Sunday so grab them this week. Use promo code TPA33 at checkout.
And … I’m Off!
I would normally have some community news and deals for you to look into at this point, but I did not get to that. This week has been a struggle. I am being kept busy by a house that has decided to just fall apart all of a sudden. My creative energies have been used up relocating kitchen activities to the garage, the porch, and even my studio because of plumbing issues while getting tons of exercise running large circles around the house because the garage door won’t open, washing my clothes in the bathroom sink because the laundry machine won’t drain, and constantly shuffling ice packs from freezer to fridge because the fridge is on and off and its replacement is weeks away from getting here. All this happening two weeks before we start some (apparently!) much-needed kitchen remodeling. I’m not making this up. But talk about mixing it up!
So, I’m going to get back to my at-home glamping while trying to get the next issue wrapped up for you. But tune in next week for more polymer pretties and inspiration, and, hopefully, less house drama from Sage’s corner! In the meantime, if you work with another medium, please share it below. Or tell us the most unusual medium you’ve combined with polymer! I’d love to get a feel for what you all are working on besides polymer. Leave links to the work as well if available! (If you get this by email, click on the post title to get to the post page and scroll down to comments.) I’m excited to see what you all have to share!
Mosaic Flow
February 24, 2019
Inspirational Art, The Polymer Arts magazine news
Are you familiar with something known as the flow state? This is that space you get in where you are lost in your own little world because you are so wrapped up in what you are doing. It happens quite commonly when people are working on creative projects and it’s a really good thing for you, both because it dissipates stress and because it increases your level of “feel-good” chemicals like serotonin and dopamine. It’s also defined as an “optimal state of consciousness where we feel our best and perform our best.” Now, who wouldn’t want that?
I bring this up because I want to talk about mosaics. I think a lot of people look at all those tiny pieces and think, “That looks like a ton of work!” And, yeah, there might be a lot of steps to putting a mosaic together, but the technique is also one that really gets you deep into a flow state. It can be kind of like doodling but with little pieces.
It would not be a hard thing to start on. Most of us have access to tons of tiny pieces, either through leftover canes, unused polymer sheets, or failed projects we haven’t had the heart to toss out. Just slice up those canes, cut up those sheets, and/or start chopping up those cured elements and you have all you need to start creating mosaics. Of course, you can make pieces specifically for mosaics from fresh clay, too!
Mosaics have been on my mind these last couple weeks because, while working on the latest book, Polymer Journeys 2019, it became quite apparent that one of the bigger trends making a splash right now is polymer mosaics and so I thought we ought to take a closer look at this not so new but definitely interesting and flexible technique. (By the way, today is the last day to get the Pre-order Sale pricing on Polymer Journeys 2019! Go to the website to get it at 30% off the cover!)
Mind you, being the insanely creative and exploratory artisans and crafters that they are, polymer enthusiasts aren’t just slapping together any old standard expectation of a mosaic. They are mixing mediums, trying out every shape in the book, using three-dimensional forms, and generally just pushing the boundaries of what the mosaic technique is. Gotta love polymer crafters!
So, let’s take a look at what some people are doing as of late and we’ll end with suggestions for getting into the mosaic flow yourself.
Different Kinds of Bits & Pieces
One of the folks who, at least initially, takes a classic approach to the art form of mosaics but certainly adds her own flavor to it, is Christi Friesen. She cuts out squares of polymer, lays a base to adhere them to and then arranges the pieces in pleasing and energetic patterns. But of course, Christi can’t leave well enough alone — she has to add bling and embellishments of all kinds! She’s been mixing in glass, wire, charms, beads, and probably a bunch of other things I will never be able to identify, to create her whimsical tiles, vessels and jewelry. Can’t you just sense the depth of the flow state she must have been in creating this beautiful maelstrom?
You could say that Claire Fairweather is classically inspired too, but her work has a twist to it. That twist is a commitment to circles used to create these wonderful images of graduated color and varied texture. Using round elements instead of squares and straight-sided shapes that join neatly together, leaves more open space but it’s one that has a fairly regular rhythm that flows in and out of the carefully placed circles. This gives the imagery more orderliness and a softer look as you can see in the many sides of her mosaic globe below. (Be sure to jump over to her blog to get the rundown on what each side is showing.)
Keep in mind that a mosaic piece does not have to be all mosaic. Large swaths can be made up of other types of polymer elements such as textured, silkscreen, impressed, or hand tooled layers or forms. A lot of Susan Crocenzi’s work, especially earlier in this decade, consist of entire halves of her pieces being a kind of polymer landscape, surrounded by glass mosaics or a mix of mosaic mediums. Here is just one example below but you can find more on her website too.
For all of you mad caners out there, here is an example of how beautifully energetic a piece can be just by arranging thick cane slices on a simple form. This bib necklace is a yet-to-be-hung creation by Ivy Niles, who makes some of the most impressive canes. You can see how much more impressive they are when working together in this off-center mandala type pattern.
If you really like the idea of doing mosaics don’t relegate your sources of inspiration to the work of polymer artist’s, as unique as they may be. Take a look at what glass and tile mosaic artists are doing these days as well (just type “mosaic art” into your favorite browser or an image-centric site, like Pinterest or Instagram) if for no other reason than there is some amazing and gorgeous work out there to enjoy. Here is a gorgeous piece by Francis Green in what seems to be a rare piece of wall art. This woman will mosaic anything she can get her hands on! She kinda reminds me of some unbridled polymer artist with their canes. Just take a look at her website.
The How-Tos of Mosaics
So, are you itching to try some mosaics now? Here are a few places you could start:
- If you want to start with something classic, even, and orderly, check out this straight-forward mosaic tile tutorial by Korrina Robinson on her blog.
- Prefer a more open and visually textural approach that is flexible enough to use any type of clay sheets or even canes? Take a look at this mosaic vase by Kathy Koontz on the Sculpey website.
- If you’re ready to really dive in, might I suggest you invest in this great tutorial on micromosaics and faux glass by Pavla Čepelíková. The opening image of this post shows examples of some of the things she’ll teach you to make in this downloadable PDF.
- If you want to use mosaic as a way to diminish your pile of scrap clay and cured bits, take a look at Christi Friesen’s mosaic video tutorial here. You can also have fun creating mosaics Antoni Gaudi style on an unusually formed box with Christi in the Polymer Art Projects – Organic book (go to our website to get your copy!)
- And if that’s not enough, Christi sells mosaic kits on her website where you can also find tons of other embellishments and bobbles to assist in your mosaic flow. Just click here!
- I even have some exciting mosaics for you to look forward to too … We just found out that Staedtler/Fimo is going to sponsor Ann and Karen Mitchell, the Masters of liquid polymer clay, to create a mini mosaic tutorial for the next issue of The Polymer Studio magazine. This is a changeup to Karen’s tiny micromosaic technique published in The Polymer Arts back in the Fall of 2015.
Whew! I got into a flow a bit there myself writing excitedly about all this fun stuff. I hope you’ll give mosaics a try if you have not already, or at least give yourself some time to just get lost in your craft today. It’s good for the brain and the soul and you never know what will come of it later in your creative journey!
Ring Riot
February 17, 2019
Inspirational Art
Have you ever made a polymer ring? It’s not one of the most popular jewelry forms in the medium which seems a little strange because they’re fairly easy to make. Maybe it’s a durability question – will the polymer ring stand up to the knocking and scraping rings have to go through? I’m not sure how they would fare if worn day in and day out but I, myself, have several polymer rings which still look as good today as the day I made them and the unusual and fantastic things you can do with polymer make them a really eye-catching piece of adornment that you’ll get lots of questions about an attention for.
There are so many different types of polymer rings you can make. You can wrap clay onto a form such as small glass bottles, sockets (for socket wrenches), and short bits of metal pipe (try pipe connectors.) You can skip the ring construction and just apply polymer to a metal ring blank. They come as bands with open channels that you can put canes and veneers in, or with a blank bezel for cabochons or sculptural elements. You can also simply create a block of clay that you punch a hole into for the finger to go through. Alternately, you can free-form the ring by hand, cure it, and then carve it into the shape and size you need. There are so many ways to make rings!
The one downside about rings, especially if you are selling them, is that you will need different sizes. Making a selection to show the style but then offering custom-made rings is one way around this but the other way is to just make simple rings that you can create a lot of and only in three or four popular sizes. This way you have those smaller inexpensive, impulse buy items to sell at your fair booth or online. And rings are easy items to sell especially at an inexpensive price point. They’re fun little bits of adornment and you don’t even really need them to match your outfits!
But if you want to create and sell one-of-a-kind rings, choose an average ring size and keep the band thickness and style wide enough to either sand down to create a larger size or add a layer of clay to create a smaller size. There are also adjustable ring blanks if you just need a base for attaching your polymer forms and elements onto.
So now that I have you thinking about rings, let’s take a look at some great polymer ring creations to further get your inspiration going.
Let’s start with one of those ring blank ideas. Here Janine Müller shows how creative you can get with a ring bezel. It doesn’t need to be a solid polymer cabochon. It can be layered or carved or hand-tooled or drilled. I’m not sure what her approach is here but the take away here is that you can try your own preferred surface treatments to create a unique ring in a bezel blank.
If you want to try an all polymer ring in a quick and easy but fun form, roll out those clay sheets and try a stacked set like these ingenious mix-and-match rings by Florence Minne-Khou. Clean cuts and a little sanding is about the most difficult aspect of a project like this so there’s hardly any excuse to not try it.
If you like getting sculptural with your work, you can go in a number of directions. Keep it simple but elegant with uncomplicated and cleanly shaped rings. Start by wrapping them around a solid form to start, and then sculpt the clay. These pieces from Angela Garrod are likely created in that fashion.
Or swirl them well into the third dimension with a folded form like this intriguing finger form from Sona Grigoryan.
Or just go completely wild and don’t worry about the functional aspect. Just make something out of this world. Perhaps this rather celestial feeling ring by Donna Greenberg will get you to push the limits of what you can do with a ring form.
If you are primarily a cane clayer, don’t think that rings–even sculptural rings–are not for you. Take note of Jana Roberts Benzon’s creative cane slicing and build up your own gorgeously detailed rings.
Oh, I could keep going with these! Just put “polymer rings” into a search on Pinterest, Instagram, Etsy or Flickr and you’ll see a ton more to get you thinking. But if you want some step by step instructions to help get you started on what could be a really addictive form, try this block cut ring tutorial from Ludmila Bakulina aka Sweety Bijou. This would be good for scraps too!
Okay … going to have to cut and run but I hope I have left you with some exciting possibilities. I’m on the road today but will be back next weekend with more food for thought and pretty things to ponder. Also, don’t forget to pre-order your Polymer Journeys 2019 before the 22nd. Release date is now March 2! Get yours at www.tenthmusearts.com
Off-Center Blue
December 3, 2018
Inspirational Art
I seem to be in a blue mood. Not blue as in sad but rather, I’ve been picking out a lot of blue artwork lately and with yesterday being the first day of Hanukkah, blue seems to be the color of the week so I’m going with that as a theme.
This first piece from an artist in the Czech Republic who goes only by the name of Hira in her shop on Fler.cz. Hira is quite the exploratory artisan. There are numerous styles and techniques in the work displayed in the shop. You can see the influence of many different artists, such as the Melanie West style cane seen here, but there are sincere efforts to design with the artist’s unique aesthetic.
Bright, deep blue on black is always a dramatic pairing but with the added bright green moving into yellow in this cane, we have a fairly energetic piece even though the color palette is limited. Then there are the yummy tactile textures adding a bit of background buzz to the high energy feel of this piece.
You really should take a look at Hira’s shop and the variety of work she does. There is careful attention paid to the finish regardless of the style and there is a satisfying balance in most all the pieces. Hira also knits! So go ahead and take some time out to check out the work.
Committed to Metal
July 25, 2018
Inspirational Art
I remember first seeing Anna Fidecka’s work back when I started the magazine in 2011. She worked in both polymer and precious metal clay and seemed to be searching for something. But I love the sophisticated look of her work which usually was a bit more geometric than the piece you see here. However, this piece is probably very telling in the direction she would eventually go, which was to leave polymer behind and work exclusively in metal but with more organic forms and earth-connected imagery.
I really loved how she worked with canes as they were never applied in a particularly orderly fashion. Her simple canes were often scattered across the surface of the clay so that they looked like little floating organic bodies such as you might see under a microscope. The way she did that in the necklace here, a piece called Mermaid World, really worked with the potential depth of layering with the help of translucents. The spare but off-center placement of the holes adds to that floating, underwater feel, which works so well with the motif and colors.
Now, when she embeds something in her clay it is usually natural semi-precious stones although she did play with enamel for a while. This is another artist whose progression can be seen by flipping through her Flickr photostream pages. You can see her most recent work in her Etsy shop.
I think we are all rather familiar with the idea of a decorative frame. We’ve seen them on old paintings, antique mirrors and even around windows and doors. Frames can be a work of art unto themselves. So when framing your own work, why not go ahead and consider pushing the decorative aspect just as you might with your bails, clasps, spacer beads or any other element added to your work? Just how far can you take it?
Well, one possible answer as to how far you can take decorative framing can be found in the work of Julie Eakes, who is the featured artist in Maggie Maggio’s “Color Spotlight” section of our winter issue. These highly-detailed and deeply, layered frames may not fit a lot of work since the business of the frames would compete with the image it is surrounding, but in a case like this, it rather matches. Julie is best know for her face cane and pointillism, so the images she frames are the strongest types of images we are drawn to (we gravitate to faces before any other easily, recognized imagery), and her canes are quite complex, so the frames work with these images rather than drown them out.
How far could you take your frames so that they work with what you are framing? Or could fun with complex frames push you to create more complex images? You can read more about why and how Julie creates these canes and frames in the article and read more about her work on her blog.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
As an illustration of how powerful the draw is when we catch just a mere glimpse, a hint, the sight of just a sliver of something, I thought I’d share this pin by Margaret Regan. This is not a new piece, but it has such a classic composition. And tell me that when you look at it, you aren’t drawn to the slim bit of silver shimmer in the center and find it really hard to look at the rest of the piece. That silver is barely there, just peeking out from between a simple textured side and a collection of cane slices on the other. The bit of silver is no more complex than the other sides, but it has three things going for it–it’s the center of the piece, it’s shiny, which will always catch our eye, and it’s recessed and slightly shadowed making it a harder surface to discern, making us want to look closer and clarify what we are seeing.
This whole piece is rather quiet and uncomplicated, but it’s gorgeous for it’s simplicity and eye-catching for using the barely-there sliver of silver. The fact is, when creating a piece with barely-there or peeking elements, simple is probably the best way to go. The mystery of what is in the shadows or recess will be the draw and can give it a quiet energy that doesn’t need to be complicated by a lot of other elements. Not that a more complex piece can’t be done well; you would just want to consider whether it would give it added impact or take away from the draw of the hidden element.
Margaret was one of the pioneers of polymer. Her website is sparse, but you can find little bits about her all over the Internet. Here is a nice article done on her work with a bit of her philosophy.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Here are a couple interesting examples of creating depth using polymer. I thought it was particularly interesting that they are the same forms created by the same artist, who obviously has some interest in the subject.
On the left we have some seriously mashed mica shift with a great organic look, while on the right we have a pure illustration created with a shadow cane. I love some dramatic mica shift, but I have to say the shadow cane is the the one that really draws you in. Take a closer look at Jeanette Kandray’s cane on her Flickr page. Those paving stone-like formations seem to get deeper the more you look at them. Well, maybe a lack of sleep helps with the illusion, but I’m sure well rested, it’s still pretty impressive.
Speaking of sleep deprivation, I’m going to get back to my never ending To Do list in hopes of getting some sleep tonight. I’ll leave you to ogle these and the many other projects on Jeanette’s Flickr photostream and her website. And if you like that cane, lucky us … Jeanette has a tutorial of it available on her Etsy site.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
I wish I could start sharing all the wonderful things we’ve already started talking about and sharing at the Polymer 2.0 conference in Racine, but I think we really need to wait until it’s over to pull out the juiciest tidbits. So, while I am off taking photos and notes for future blogs and articles, why don’t you try this unusual, but older, technique that involves creating long ribbons of polymer.
The tutorial was originally created by Nora Jean Stone for Polymer Clay Polyzine some 13 years ago, but it’s still a relevant technique today that I really think could use some more exploration. The depth and patterning results of this approach could be dramatically altered by changing up the layers and the way the ribbon is folded, as well as choosing solid or mica clays or a combination of them. Have you ever tried it? If you haven’t, wouldn’t you like to?
Go get yourself some time in the studio with this or any of the other neat tips and tutorials dug up for you this week. See what surprises you have in store for yourself!
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Is it just me or are the patterns in these beads particularly mesmerizing? I am not much of a caner, as I have professed before, but there are times when I wish I was more accomplished at it. When I saw these beads on Pinterest not long ago I thought the cane was a pretty cool one that had a lot of potential for visual textures, back sides, borders, etc. Then I clicked through to the link and saw how easy it was. Even I could do that!
Petra Nemravka, the force behind the Czech Republic’s shop and website Nemravka.cz created a very nicely photographed and easy to follow tutorial for this cane including rainbow variations. If you can make a jelly roll cane, you can create this little beauty which could be great for caners and non-caners alike.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
The ‘mirror image’ is a very common element in nature; from leaves to flowers to fruit to every creature I can think of, there are often two halves mirroring each other to make the whole. I’ve seen a number of interesting uses of this in polymer pieces lately and thought this might be an easy theme to gather up work for this week. Not so much, however. Because using this kind of element necessitates a centered composition where the mirror images appear–their meeting point in the middle creating a center line–and with a community much enamored of asymmetry, it is far rarer than I would have thought. But, I aim to find a variety of examples where the mirroring adds energy or depth to a piece rather than feeling stale because the element (or elements) are arranged on some center line.
The obvious first place to look is in caning. The kaleidoscope cane alone holds up a great argument for mirroring. Create an pie slice shaped cane, cut up the length and lay matching sides together to fill in the pie round (or some approach akin to that.) And you end up with usually very energized visuals. Lines, curves, angles and other directional elements will be moving from the center in opposite directions creating that energy.
When I hear kaleidoscope canes, I always think of Carol Simmons and her intense precision in this art form. These pendants are examples for her upcoming workshops being held in Racine, Wisconsin after the RAM Symposium later in October. (It’s a waiting list only class; find out more on her website.) The center lines from the process of mirroring images have become a range of star burst like patterns, pushing direction from the center of the pendants to the outside that adds dynamic energy and a mesmerizing amount of detail on such a small space.
If you haven’t attempted a kaleidoscope cane before, but are interested, there are dozens of basic free tutorials as well as more intricate ones sold on Etsy and through other shops. Just Google the term “kaleidoscope cane tutorial” for many instant options.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
So after a week of extruder contemplation, have you gone into the studio to try out some new ideas yourself? Well, if not, but you’re anxious to try something out, here are a few ideas for you.
A shaped cane with no background fill? Is that possible? According to Lilu of Russia, you can do this with an extruder. How is that possible? Even our brave artist here can’t say how this works, but can show us successful results. The caveat is that you lose about half your clay to scraps as the ends come out mangled. But, with so many scrap cane techniques to put those towards, that might not be the worse thing to happen.
For those of you who want something more straightforward and less experimental, try these extruded snake surface designs with graduated colors created by Lucy Struncova. No real mysteries here … just extrude small snakes in graduated colors (if you’ve not done that before, go here for the classic tutorial on creating rainbow snakes with an extruder), lay them side by side, use the edge of a credit card, or long thin needle tool to impress the lines perpendicular to the snakes and cut out shapes as desired. A quick easy way to get a surface design with a range of colors and complex looking texture.
Or, you can do both! Roll your scrap ends from the background-less extruded cane through the pasta machine, punch a stack of discs to put back into the extruder, extrude snakes to your heart’s content and make Lucy’s snake and line textured sheets. Then accent them with cane slices. Don’t you love how versatile polymer can be? Even using the same stack of clay through several techniques.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Read More
Reader Corine Lindhorst was kind enough to write and share the work of this highly talented paper artist whose work you see here. Although it’s not extruded, the use of long strips of paper is not unlike using long snakes of extruded clay to form patterns and images. The images in the case of these paper illustrations by Yulia Brodskaya are incredibly fluid and capture nuances that some pencil and paint artists with their limitless color and texture options can’t always accomplish.
Yulia started working as a graphic designer and illustrator until realizing her passion was in paper. Now, she says she “draws with paper instead of on it.” And very, very successfully I might add. In just the 8 years since she started experimenting in paper illustration, she has amassed a large list of huge clients from Starbucks to Godiva, Target, Sephora and The New York Times Magazine. This is one of her more colorful and fun pieces, but may not be the most amazing of them. Her portraiture has some amazingly emotional eyes and facial expressions, especially considering the limitations of the medium. Or are they limitations?
Okay, you clay extruder illustrators … get to it. There is a market for you and one with deep pockets if you’re up for the challenge!
Take a closer look at Yulila’s work on her website but for a quick and powerful overview, take a look at this post on the “This is Colossal” blog.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
Claire Fairweather, herself, sent this along when she saw we were doing an extruded themed week. In her words: “‘Extruded Light’ is a candle bowl, approximately 6-inches in diameter. I made it by winding extruded, translucent Premo polymer clay around a spherical glass bowl. It looks great with a color changing LED candle in it, but is difficult to photograph. The white candle light, in this photograph, shows the extruded strings the best.”
I know how you all love translucent clay applications, so it would have been hard not to share this. The idea is pretty simple, but the wrapped strings add a calm horizontal texture. My editorial assistant, Paula Gilbert, is here with me for the opening of The Great Create at which I am doing demos (tonight in Denver!) and teaching a class on Saturday. Paula saw this bowl and said that looks like a glowing moon. And, so it does. I wish I had time to ask Claire how she got the craters in it or if they were incidental. Happy, unintended element if so.
Claire creates award-winning polymer work and writes her blog from New Zealand.
If you like this blog, support The Polymer Arts projects with a subscription or issue of The Polymer Arts magazine as well as supporting our advertising partners.
