Scarf as Necklace
December 15, 2017 Inspirational Art
As you may have immediately noticed, these scarves are not polymer. In fact, most of them are mass-produced or use mass-produced components. So why am I showing you this? Because the popularity of these kinds of bedecked scarves are not seen in the polymer community, not at least that I could find, which means there is a wide-open opportunity for some of you out there.
Just look at the two-fold use of these. Not only can you have a warm and cozy bit of beautiful fabric to dress up your day, you can have jewelry that can be seen while wearing a scarf. I have never liked having to pick between a scarf and a necklace and with this kind of merging of the two, you don’t have to.
Now, you could just stick with the single pin or charms like we saw in the last couple posts to get some fun and fancy decor on your chest but what about when you want to get a bit more flashy or formal? I just think these designs really open up a lot of possibilities for us as polymer artists. For one, how fun would it be to turn a boring basic scarf into a snazzy infinity scarf that doubles as a necklace AND gives many a bead in that stash of beautiful odds and ends, a beautiful place to hang?
Hopefully, these also give you all kinds of ideas for alternate ways to hang polymer pendants or has you thinking up new wide tube designs or all the above. It would not take long to make the components if you don’t already have them and basic scarves are cheap. I bet you have one or two in a drawer somewhere that you never wear. Just think of how you could dress them up!
I would love to be able to give attribution to each of the pieces here but I somehow managed to find all but one with a broken link or dead website. However, the designer of the Atelie42 scarf piece in the upper right does have a website but even there, most of the text seems to be image based which means it can’t be translated online. But the variation on jewelry scarves is worth a couple of minutes even for those of us who can’t read the text. Head over to the website here or this article that has a nice selection ready for you to pore over.
Detail Rich Reflections
December 6, 2017 Inspirational Art
Still exploring the idea of setting stones in unusual ways, I have another stone setting here that rivals the stones themselves for attention.
Daniela D’Uva creates wonderfully complex and dreamlike settings for her stones and, as shown in this piece, doesn’t stop at showcasing just one bright and shiny focal point but uses several at once. However, the crystals are hard to focus on with such colorful translucent leaves and petals surrounding them. The classic combination of purple and green is so rich and vibrant that the stones only show well because of their reflective quality. The multitude of detail, from the translucent canes to the winding tendrils to the tiny microbeads, add to a feeling of richness. The flow of the tendrils and the way the leaves point over and across the crystals keeps the eye moving.
The approach and the effect are not so different from yesterday’s piece but this one does stick with a stone-centered composition. It’s the asymmetry of the cane placement along with the tendrils and pointing leaves that give it so much energy and life.
Enjoy more of Daniela’s work on Flickr and on her Facebook page.
Variation on Time
December 1, 2017 Inspirational Art
I spent a lot of time looking for differently constructed clocks in polymer and couldn’t find much that really illustrated the point I was hoping to make. What I wanted was to show that a clock does not have to be on a flat surface. It can be made of many parts, attached or not, and fully dimensional. As long as you have something that can house or hide the clock mechanism while holding out the hands, the rest is wide open. You can have the hour markers designated by any form and attach them with sticks or wire or be free floating–whatever suits the piece and your inclination.
These two examples are commercial designs rather than polymer art but I think they give you the basics of this idea of moving beyond the flat clock face. Not only do these kinds of clocks make for really interesting wall pieces, they give you the freedom to use pieces you may already have such as large hollow beads, faux stones, unhung pendants, small figurines, flowers, etc.
As a gift, giving a clock that has separate pieces might be best attached to something that can be hung as one piece, like a backing of Plexiglas or painted plywood. Or include instructions for a template to mark on the wall where each piece goes. There is little to no construction to deal with but you will have to make concessions in the design for how the individual pieces will be hung. Alternately, go for a design where the elements are attached like the flowers you see here.
The sky is the limit with these kinds of designs. For more ideas, try searching “DIY clocks,” which was the keyword set that brought me to these two pieces. I hope these sparks some ideas and I look forward to seeing inventive clock designs this month!
The Proliferation Effect
October 9, 2017 Inspirational Art
The thing about many items being packed into a limited space is that you stop seeing those individual items and see them as one thing with a texture, and energy that does not exist in the separate parts. You see it in the crowded stands at a game, a bowl of snacks or even in your drawers full of clay. It is a kind of gestalt effect. You can use this crowding of objects to create wonderfully energetic and highly textured pieces.
This is a piece I found last week that got me thinking about this as an artistic approach. The necklace is by Hee-ang Kim, a Korean graduate student Kookmin University in Korea at the time of its creation in 2014. It is part of an aptly named series called Proliferation, this being Proliferation XI. The super thin polymer petals are stitched together to create these feather-like beads, which collectively flutter and wave in a very touchable looking texture.
Hee-ang works in a variety of materials including other types of plastics, metal and, it seems, just about anything at hand. Regardless of material, collecting multiples of objects into energetic, intriguing and often strange never-before-seen organic forms dominate Hee-ang’s collections. You can take a look at the many ways this effect can be used with thin bits of polymer on Hee-ang’s Instagram and website.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Back When We Were Young
September 4, 2017 Inspirational Art
Okay, maybe we weren’t so very young still just five years ago but man, it sure feels like a very long time ago. What Angela has done between then, as wonderful as the work is, and now, is really incredible. Here is the post from May 15th, 2012:
Angela Garrod is an emerging artist from the UK. She’s featured in our galleries in the next issue (order yours at http://thepolymerarts.com/Subscribe.html). Her newest piece here is not in the issue but it’s just fantastic–cool, light, springtime polymer. Her new website just went up, too: http://clayninepolymerdesigns.co.uk/
You can, of course, jump over to Angela’s website as above to compare old and new but I like doing so on her Flickr photostream where a clear timeline is shown as you move through the pages.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Bevy of Blues
July 27, 2017 Inspirational Art
In my search for popular blues, this person’s work that you see here kept popping up, only it seemed to be attached to different people all the time. As it turns out, this is an artist that sticks with making amazing beads and elements that bead artisans can then assemble rather than creating a lot of finished work herself.
Helen Backhouse is her name and her beads and elements can be found scattered throughout Etsy and on various Facebook pages. Her pieces look to be impressed clay colored primarily with mica powders and, I’d guess, some kind of patina and weathered effect techniques, perhaps dyes or paints. Her blues are straight from the back yard, reflecting the brilliant blues found in a butterfly’s or bird’s wing as well as the dusty teals and blues leaning into greens that appear in natural metal patinas. The shapes are simple, the textures organic, and the coloring coolly dramatic. That makes for really eye-catching elements.
The best place to check out her pieces is on her Facebook page where the designers that use her pieces tag her in their photos alongside the stuff she does post.
Weekly Inspiration Challenge: Explore your favorite color. Spend just a couple of minutes writing down what you like about this color, what it reminds you of, and where you notice it most often. Look back at what you wrote and see what kind of work, forms, textures or other ideas these thoughts bring up and let those guide you in the creation of new pieces.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Tenderly Organic
July 21, 2017 Inspirational Art
We are going through the final stages of emptying the family home this weekend and I must rush off to get working on that but wanted to leave you with one more organic and unusual piece to contemplate.
I suppose you can’t really say that this composition is so unusual. The side focal thing in necklaces is nothing new but can you tell that the flowers in leaves are neither real nor made of anything like polymer? These are actually created from leather which is certainly part of why it has such a soft look to it, one that might be hard–although not impossible–for polymer to recreate.
The leather work is so realistic, however, and the palette restricted to a very realistic leaf green and pale peach makes for a beautiful and tender look. I was thinking this even before I saw that Viola of the Viola Wizard shop on Live Master named it “Tender Age.” Just seems very fitting for the stroll down memory lane that will sure to be a large part of my weekend.
So off to join the family. But you can enjoy more of Viola’s work in her Live Master shop.
Weekly Inspiration Challenge: Give yourself permission to make something personally meaningful, something that you put time and effort into that has nothing to do with making a sale, creating the perfect gift, or impressing others. Make it knowing no one else will see it and the only person you are trying to impress is yourself. See where your personal passion takes you.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Organic Support
July 19, 2017 Inspirational Art
Fantastical and fun as well as fundraising, this amazing polymer bra was Randee Ketzel‘s entry into the annual Art Bra event in Austin, Texas. The chosen pieces are showcased during a one-night event by local models, all of whom are breast cancer survivors. The huge event raises money for the Breast Cancer Resource Center which assists Central Texans affected by breast cancer in overcoming obstacles related to accessing treatment and confronting the issues that affect quality of life, all for free. What a cool event!
And what a beautiful piece Randee created for this very noble cause. The composition, with the leaves coming up to cradle the mix of flowers as they flutter off towards the straps, is nicely balanced by the composite cane flower beads that ground the upward sweeping cups on their centered, drop placement.
For more on Randee and her other work, go to her Flickr photostream or her Etsy shop. For more on the organization and event this was made for, go to the Art Bra event site.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
How often do you touch art?
No, I don’t mean being the unruly museum visitor who gets yelled at by the docent, but in your everyday life, how many things do you touch that you would also consider art?
Works in the applied arts, which encompass decorative art, adornment, and functional objects, are often things that we touch. Because of this, the tactile texture of most applied art is exceedingly important. Not only can the wrong texture put someone off from buying a piece, but the right texture can make a huge difference between people liking your work due to its visual appeal and being utterly in love with it because it feels so good to touch. It is also another means by which you can express your intention.
Choosing Tactile
The first time I touched a Melanie West polymer bead, it was like taking a bite of the most heavenly chocolate mousse. Her finishes are flawless and so soft; my fingers just couldn’t get enough. That kind of tactile reaction is golden. It also supports her soft and organic themes. As wonderful as her finishes are, that kind of texture may not be wanted in your work or may not even be possible due to techniques or materials you are using.
The point is that her textures are part of the experience of her work and, if you’re creating things that will be handled, you too should consider the experience of touching your piece as part of its aesthetic value. As always, let your intention drive your decisions, but pay attention to the physical sensation experienced when handling the work and aim to have it support your intention, alongside all your other design decisions.
For instance, if you want to share your love of the beach through your work, think about the physical sensations that stand out the most – the soft breeze on your face, the refreshingly cold water on your feet, and your toes digging into cool sand. Now, how do you translate those physical sensations into tactile texture that will help you share that experience to those who will handle your work?
You can do so by thinking in terms of those adjectives – soft, refreshing, and cool. You probably want those to be the dominant sensations so don’t go for, say, a sandy texture just because the beach has sand. Is a gritty, sandy texture going to convey soft, refreshing, and cool? Chances are, it’s just going to remind someone of getting sand in their shoes and other uncomfortable places. You can create a visually sandy texture that includes sandy colors and a speckled look, but in terms of tactile sensations, going for a soft, maybe matte surface that will feel cool and soothing to the touch will share something closer to the sensations you want to relay.
There are a lot of materials that have limits on the tactile textures available. Polymer clay can replicate most tactile surfaces except for fuzzy, but felted work is limited to that dense and slightly rough feel of matted wool while glass will almost always have a smooth aspect. There are also techniques that create their own texture or limit how you can further manipulate the material to create texture. Learn the range of tactile sensations available in the materials and techniques you use so you know what options you have.
Work that Begs to Be Touched
There are a couple things you can focus on in order to create work that people will love to touch. It primarily involves smoothness and variation.
Smooth Surfaces
Our sense of touch enjoys traveling along a pleasantly smooth substance such as polished metal or stone. But what we like most is softness, such as a fluffy blanket or bunny fur. Softness is a type of smoothness as it allows our skin to glide across, unimpeded.
Note that you can re-create the look of fluffy and furry textures in hard substances such as clay or wood but you can’t re-create the same associated softness because, in those materials, you lose the ability for our fingertips to effortlessly glide across it in the same way due to the unevenness in a hard surface. So, recreating the look of fur doesn’t necessarily re-create the tactile experience. The ‘look’ of fur is just a visual experience.
So, be careful to think of smooth tactile texture, not in the way it looks, but the way it feels.
Variation
Our fingertips were made for receiving information, and lots of it, so they do very much enjoy a variation in texture. However, we don’t normally enjoy variation that is sharp, prickly, scratchy, or sticky. These textures make it hard for our fingers to glide along and take it in, not to mention that they are also often painful.
However, bumps, grooves, and fine lines excite the nerve endings. It’s just like the sense of taste – we aren’t too happy with things that are bland but a lot of flavors that go well together thrills our tongue. Our fingers, likewise, enjoy complexity.
The Best of Both – Smooth and Varied
I think you’ll find that pieces with both a smooth and varied surface attain the pinnacle of touchableness.
Take a look at the pearled bracelet here. It is not even in your presence and you probably still feel a tiny urge to reach out and touch it. That’s because each half pearl has a small, smooth surface which is further aided by the round and unimpeded nature of its shape as well as there being a varied field of them.
The combination of smoothness and variation in this bracelet makes for an engaging texture, adding energy to the piece both in its tactile and visual nature. Note that this also has a bit of rough texture around the edges to provides textural contrast. Because contrast is important in texture too!
The contrast of texture fit well into my intention of showing the classic perfection and allure of pearls in an organic setting. I wanted it to be a subtle reminder of the messy world pearls actually come from even though we now associate them with neat, tidy, and conservative dress.
The Tactile Balancing Act
The textures you choose will dictate limitations in terms of surface treatments and other parts of your design, so you have to balance out your tactile texture choices with your other design choices. For instance, if you create a deep and dense texture on a light color, it’s going to appear darker, which you might not want. Or you may want a very smooth surface but want pattern to raise the energy so you would have to figure out how to incorporate pattern visually with inks, veneers, or other smooth surface applications.It just needs to make sense for your intention and the limitations of material.
If your tactile texture decisions, weighed in light of all the other decisions you have to make about color, shape line, function, etc., are chosen in service of your intention, you are sure to have a beautiful, cohesive, and interestingly touchable design.
Should I Call Them Mini-Mags?
The first week of the Art Boxer Clubs has commenced and one of the first comments about the weekly Pick-Me-Up is that it ought to be described as a mini-mag. I guess it is. It’s hard to take the magazine attitude out of me. There were 5 little articles and a good handful of links for further exploring. So, yeah, maybe it is a mini-mag. I might have to rethink what I call it.
But regardless of what it’s called, joining the club will get you a little extra boost each week and at least once a month, you’ll get a special discount, a first dibs or limited stock offer, and/or a giveaway. And right now you can get in on it with a 2 week free trial and a FOREVER discounted rate.
So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club (there are only a few spots left in this upgrade to personal coaching option, at least as of my writing this), or buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.
No Fires Here
We are still a safe distance from all the fires and the sky has started to clear up from the smoke so nothing too exciting to report from Tenth Muse central. I’ve already gotten started on the next project but I don’t want to say too much about it. It seems like every time I say something, I get jinxed and delayed. So, you’ll just have to stop by and check in with me on the weekends, or read the newsletters, or, if you want to be the first to know, join one of the new Club options as Art Boxers will be the first to know (as well as getting extra discounts … just sayin’.)
I hope you all have a relatively unexciting week yourselves. It’s not like we need much more excitement with the craziness of the world providing plenty already. Just go make beautiful things and be kind and caring to each other.
Read MoreHave you noticed that, in art, very few things exist or are created in a vacuum? In other words, every choice you make has an effect on all the other choices you have made or will make when designing and creating original works of art. So, if you are coming to my blog for the first time, you may want to read the last three weeks of posts first because each successive article builds off the last.
Last week we talked about color value and this week we’re going to talk about how you can change the value along with something called saturation. This will be a little heavy on terminology but it’s easy stuff and by the time you’re done reading, you will have quite the sophisticated color vocabulary.
I also want to speak for just a moment on the reason you would want to do this deep dive into color and design. Whether you create your own colors or simply choose colors from pre-mixed options, your choices are best ruled by your understanding of the characteristics of color. Of course, understanding color characteristics is essential in color mixing but choosing and identifying color requires the same knowledge especially when creating color palettes, analyzing your work (or the work of others), and correcting or improving your color choices.
Working with color, like anything else in design, is about the relationship between colors and between all the design elements. In design, we work with likeness and disparity. That’s really what all relationships are about, aren’t they? Think about your spouse or your best friend or the coworkers you like to hang around with. You have something in common, some area of your life that overlaps that you can share. But you also have differences. These differences make the relationship interesting, encourages curiosity and conversation, and allows each of you to fulfill different roles in the relationship. That’s how design works as well, including between colors.
So, if you keep in mind that these conversations are about those design relationships, I think you’ll start to see just how useful and essential these immersive color lessons are regardless of whether you makes your own colors, pick available colors, or simply want a better understanding of the art that you enjoy.
Saturation is Not Value
Now, let’s talk about value versus saturation. For some reason, these two concepts get confused a lot even though they are quite different. As you learned last week, value is the lightness or darkness of a color. Saturation, however, is about how intense the color is or how close it is to the unadulterated hue or “key” color, at least in regard to pigment. (This is dealt with a little bit differently when it comes to mixing light in RGB. Just thought you ought to know that in case you come across a definition that talks about saturation, brightness, and luminosity. That’s RGB stuff.)
So, let’s take a pure blue as an example of both high saturation and dark value. Take a look at the color wheel. True blue, in its most saturated and vivid form there on the outside ring of the color wheel, is far darker than pure yellow. You could make that blue as light in value as yellow by adding a lot of white to it but that would also change its saturation because the addition of white takes away from the purity of the hue, right? The addition of white in a color is called tint.
Now let’s take that yellow. If you wanted it to be as dark in value as the blue, you could add a lot of black, so much so that it would probably look gray with little yellow to be gleaned. This would both darken the value and desaturate it, a lot. The addition of black to a color is known as shade.
So that’s the thing with adding black or white to a color. It will desaturate a color but it also will make it lighter or darker in value. I bet that doesn’t fully clarify why value and saturation are so different since adding white or black changes the lightness or darkness (value) as well as the intensity of a color (saturation). Well, here’s the thing – you can, on the other hand, change the saturation without changing the value, just not with black or white.
Let’s look at the color red for moment. On the CMY color wheel, you can see that opposite red is cyan. They look to be about the same midrange color value, right? If you add a bit of cyan to the red that will reduce the saturation or purity of the red by altering its hue but it will not make a noticeable change to its value. If you got yourself one of those CMY color wheels, you’ll see on the front side there that each ring getting closer to the center shows what happens when you add 10%, 20%, 30%, or 40% of each hue’s complementary color. That kind of mix tones down the color which is why it is called a tone.
You can also tone down a color without changing its value by adding a gray that is the same value as the color. In fact, a fully desaturated color would be just gray. Or you can mix in a lighter or darker gray to make the color lighter or darker while toning it down but without muddying the key with its complement. A gray mixed with a color is also called tone.
So, you see, changing saturation can, but does not always, change value but changing the value will necessarily change the saturation of a hue, making it less pure. This is true for color mixing or even using digital photo editing (and is why I warned you last week not to use saturation options in photo editing to look at values in grayscale, because value is not taken into account.)
Your Bright, New, Shiny Color Vocabulary
Congratulations! You probably didn’t realize it but you just completed a major step in your color education. If you’ve read all the posts, you have learned (or refreshed your understanding of) the three most important aspects of color – Hue, Value, and Saturation.
And, now, with this article, you’ve come to know the three primary ways to change a color. Let’s review because it’s kind of cool to realize how much you’ve soaked up.
The three primary characteristics of color:
Hue – the key and name of a color.
Value – the lightness or darkness of a color.
Saturation – how pure or how adulterated a color is due to the addition of white, black, gray or a complementary color.
The three primary ways of adjusting color in pigments:
Tint – the addition of white to a color.
Shade – the addition of black to a color.
Tone – the addition of gray or a complementary hue to a color.
Look at that! You have six color terms that are going to help you tremendously in color mixing, choosing palettes, and analyzing work. But let’s spend a little more time with those last three just to be sure you got them well seated in your creative little brains.
Color Quiz
Okay, let’s put your new knowledge to the test. Take a look at the opening image and the images below and find the pure hue (just visually – you don’t have to name it) and then determine the variation of that hue was accomplished with tints, shades, and/or tone. We’ll chat about them after you have a chance to come up with your own thoughts.
Carved wooden vessel by Louise Hibbert
A polymer bracelet by Judy Belcher.
Well, what did you come up with? Some of these examples are not so straightforward but I find them very interesting.
First of all, Pikalda’s glass beads that open this post have a saturated blue as its key color while the other color variations, aside from the black and white accents, are the key blue with white added so they are tinted versions of the key color. Pretty easy to see that, right?
With Louise Hibbert’s wooden vessel, the key is a kind of violet and, I’m sure you guessed it, the gradation to the nearly black tips is the result of adding black, in other words, creating shades of the hue. But there are also diluted versions of the hue where she lets the wood show through towards the center. Is that a tint because it makes it lighter or a tone becuase it isn’t quite white that has been added?
Well, think in terms of the color elements here. Since the violet color is translucent, it visually mixes with the color of the wood, a pale cream, which is a tint of yellow. This actually makes that diluted violet a tone because the change in color is not due to the addition of just white or just black and it’s a color that muddies the key color even if just a little. It’s true that yellow is not the direct complement of violet – that would be a yellow-green – but you can actually tone down a color with something close to its complement too. We’ll get more into those complexities when we get deeper into color mixing so you can just stash that info away for later if you like.
Now, in Judy Belcher’s bracelet, it gets even a bit more complicated because, in truth, the fully saturated hue is not present. That would be bright lime green but the key color has been toned down with variations of gray. In fact, the entire bracelet is a series of lime green tones with nothng else but some white. Some tones are due to a very light gray addition, others to a few different middle grays and the darkest green would be a tone with a dark gray. Being able to spot the key in something like this takes practice but not a lot. It might just take the following little exercises.
For Further Study
Okay, so there are a couple ways you can further concrete your, hopefully, not too hard-earned knowledge. These are both fun and easy and take 10-15 minutes each to do.
Color Wheel Studies
First of all, if you bought yourself that CMY color wheel I suggested – or even if you didn’t – you can see tones, tints and shades set up on this handy color tool with approximate percentages that one would mix to achieve these colors from a key. Here is a video that the Color Wheel Company put together to explain how to use their color wheel tool while making note of where these items are on it so you can familiarize yourself with them just by looking over your color wheel. Clicking on the image takes you to the purchase page but scroll down to find the videos.
Isn’t crazy just how much information they put on this little paper tool? Keep in mind that those percentages for the tones, tints and shades are approximate because in the real world, our materials have varying amounts of pigment so adding 10% of one complement to a color could make a dramatic change while adding 10% of a complement to another color may make almost no change. You’ll start to get a sense of the stronger and weaker colors (and brands) if you do the exercise below and as we work through color mixing in July.
Mix it Up
Studying the color wheel is an easy and quick way to see the difference between tone, tint, and shade but the best way to not only remember the terminology and what it means but to really understand how saturation, tint, shade, and tone work in color is to mix it up.
So, grab some clay in one fully saturated key color. Pick your favorite or grab one of the primaries – cyan, magenta, or yellow. You also need a bit of your chosen color’s complement plus black and white. Roll out each clay on your thickest pasta machine setting and, using a single punch cutter, punch out portions of clay from each sheet. (You can also do this with paint – you won’t be “punching” out your portions but, instead, you’ll be picking up dabs of paint.)
- At the top of a piece of paper, write Tint, Shade, Complement Tone, and Gray Tone as column headers
- Put one portion of your key color under each column header. This will be a starting point for each color as we desaturate it.
- Punch out two portions of your key color and mix it with two portions of white until well mixed. Sheet the clay and punch out one portion of this mix. Put it under the tint column with space enough between it and the key color for another portion.
- Take one of those mixed portions and one of the key color and mix that. Punch a portion out of this new mix and place it between the previous mix and the key color.
- Take the last portion of the first mix and mix it with a portion of white. Punch out a portion of this very light mix and line it up in the column under the middle mix, followed by a portion of whites to complete a column of tints from key color to white.
At this point you have three desaturated tint versions of the key color. These are not a lot of steps between the key color and white but it will give you an idea of what white does to a fully saturated color. If you are game before creating a wider range of this tint sampler, you can double the amount for each of the three mixes we just did so you can mix additional portions and create four more steps, one between each of the five portions in the tint column.
- Now go through the exact same process, creating 3 or 7 mixes, as you prefer, but instead of white …
- … make a column using black to build a range under the Shade header. You may want to use 2-3 times as much key color as black for your middle shade to get a better gradation since black is very strong, as you can see in my example. I used twice as much key color and all the mixes are still awfully dark.
- … use the complementary color to create a range under the Complementary Tone column.
- … mix a gray (I used twice as much white as black to get my middle gray) to add to the key color to create a range under the Gray Tone column.
You will probably notice, as you mix, that sometimes the progression from the key color to the color you mix in is not very even or regular. For instance, if your key color is particularly dark in value such as the Ultramarine blue, the jump between the last mix and white may seem quite a bit different, like it could use another mix in between. You are, of course, welcome to change up the portions of color in your mixes to make a more regularly graduated range. This will, however, demonstrate that the amount of pigment in different colors of clay and between brands can differ and so some colors will dominate in a mix. You’ll need to use more of the weaker color to make the range gradations more even. But making a perfectly graduated range is not the purpose of this exercise. The idea is that you make the mixes, see the changes in color, and associated with the terminology.
Now why am I so adamant about you learning the terminology? Well, in July, as we learn about color mixing and palette choices, being able to verbalize the common and contrasting characteristics in a set of colors will be key to making beautiful, intentional color choices. Plus, you can impress friends, family, and complete strangers with sophisticated color banter!
So, relax and mix up some colors. It’s easy and often surprising how the colors come out. I have found more than one “new favorite color” doing these kinds of exercises. You just might find a inspiring new color or two as well!
Wondering about my references to Intention? Or how to support this content?
If you enjoy these articles, you can help me keep the lights on by making a purchase of any of the publications I have on the Tenth Muse Arts website or by making a one-time or monthly contribution here.
Read the set of articles on Intention in the February edition of the Virtual Art Box or catch up on the concept of marks, lines, and shape with a purchase of one or more of the original Virtual Art Box offerings. They are all on SALE, 25% off right now – no promo code needed. I have also put all books on sale at 20% off for the next couple weeks so it’s a great time to fill up your library.
Your purchases help support this free content as well as giving you a stronger base for the conversations we will have going forward.
If your budget doesn’t allow such support, that’s perfectly okay. I just hope this is supporting your creative journey giving you more joy in your work. if it does, just let people know this is freely available so I can support even more folks.
My Weird Low Pressure Week
Hopefully there aren’t too many mistakes here. I need to beg your forgiveness if there are. My brain has literally been shorted as I gave blood this past week and got tested to see if I am a antibody plasma donor candidate to help out COVID-19 patients but my naturally very low blood pressue has yet to recover so I feel very dingy and am sometimes dizzy still, 5 days later. I never could give blood in Colorado due to the high elevation and even lower blood pressure up there but they thought I’d be fine down here. Well, guess not. We learn something new all the time!
So, I probably can’t give plasma eithere but I am still going to do all I can during this rough time to help others and, as part of that, maybe you will allow me to ask a little favor. I know this has gotten a little political here in the states but thsi is not about politics … I would just like to ask that when you are out, and it has been recommended where you live, you can show your love and concern for your community by the simple act of wearing a mask. I wear one everywhere even though I’ve already had this bug so I am supposedly immune and can’t pass it on. But people are scared and worried and wearing a mask shows you care, even if you question the validity of the science that says it will save others from getting sick. We need all the consideration and caring we can put out there right now, don’t you think?
Ok, that is my public service announcement for the day. I hope you are all staying well and will find joy in a creative and colorful week!
Read More
I planned on talking about color variation this week but then it occurred to me, that we will need to talk about color contrast and you can’t talk about contrasting color without talking about value. So, I switched up my plans and we’re going to talk about the often neglected concept of color’s lights and darks, otherwise known as value.
The Light and Dark of It
So, what exactly is value? Value is simply what I just mentioned – the lightness or darkness of a color. This has nothing to do with their hue. Remember, hue works more like a category so mint green and hunter green both are a green hue, but mint has a light color value while hunter green has a very dark value.
The most important thing to remember about value is that it used to create contrast. For instance, purple has a much darker value than yellow, right? Used together, they are high in value contrast and, so, make a rather dramatic color palette. On the other hand, a dark magenta and forest green will have the same or similar middle-dark value. Putting them together will not create much value contrast. Although there is nothing wrong with that – they belong to complementary (opposite) hues on the CMY color wheel so they have contrast there – the lack of value contrast greatly reduces the potential of their dramatic contrast in hues.
To be blunt, similar values in rich colors such as dark magenta and forest green would just be boring. Now, if you choose a slightly darker magenta and a lighter green such as a burgundy and an jade, that will increase the value contrast and make a much more interesting color combination, as seen in the example image here. Below the color combinations you see them with the hue removed, leaving just their gray value. So that’s another way you can think about value – it’s the lightness or the darkness of the color without any color in it.
Seeing the Value
If you are a painter you might be shaking your head at the simplicity of the above explanation so let’s get a bit more precise. (If your head is already spinning a bit, just read through this but don’t worry about understanding it fully yet. You can come back to this later.)
Value is not just the lightness or darkness of a color. It is the lightness or darkness of what is SEEN. That’s an important distinction because the color of things we are looking at out in the world won’t stay constant as the light changes.
For instance, have you ever been around someone in a restaurant or on a train – some poorly lighted space – thinking their hair is dark brown only to see them step outside and find that it’s a rich red? Their hair didn’t change color. The light did.
The less light there is, the darker things appear, right? That seems obvious, but it’s really important to consciously understand that. It underlines one of the primary principles about creating art, especially imagery you’re trying to reproduce in any realistic manner – it’s not about what you think something is, it’s about what you actually see. So, if you are painting a portrait of me in a dark room, you would not paint me with the bright henna red and copper hair you know I have, because in the dim light, my hair would not actually look red or copper.
You may not be a painter but if you plan to build images in canes or are painting with polymer or create pretty much anything where you are developing a two-dimensional illusion of form and depth , you will be working with these kinds of value changes in color. Even if you don’t create imagery, the concept of how light changes the value of a color is useful for understanding what value is and why it is important in your designs.
You’ve actually learned about the importance of value if you’ve ever tried to draw a ball – to make it look round you have a very light spot where light hits the sphere directly, a dark side where the light doesn’t reach, and a gradation from light to dark between the two. Now, if that ball had color, like the blue ball you see here, you can tell that it’s a solid blue ball even though it actually has a variety of blues in this rendering of it. But I couldn’t just fill in a circle with one shade of blue and have you understand it is a ball. We need to see that change in color value – the swatches pulled from the blue ball are all the same hue of blue but are all different values – in order to see a dimensional form.
Without those changes of value – those lights and darks, those highlights and shadows – everything would just look flat. That is also why you don’t want to take a photo of an object with the light shining directly on the front facing view – it will kill the shadows, eliminate value changes, and make it difficult to perceive its form.
Intentional Value
So, a change in color value provides us with visual information, right? We like that. We like to be able to perceive if something is round or flat, textured or smooth. The contrast between light and shadow gives us that information. It is one of the reasons that we look for (mostly unconsciously) the contrast in value in works of art as well. Contrast, or the lack of it, can tell us a great deal.
In these beads by Jennifer Morris, there is very little contrast in value but these are not about drama so it makes sense. There are muted and pale colors with feminine floral motifs on round forms with low value contrast to match. The intention for this to be soft and quiet is obvious and with all the characteristics servicing that intention, she has designed some very lovely beads.
On the other hand, here are liquid polymer painted pieces by Lynn Yuhr who is clearly going for a bold and graphic look with wide ranging color values to support that objective.
So, don’t think that you must have a high contrast in the value of your colors. It can be high or low depending on what will best serve your intention. Value contrast also can bring attention to certain portions of your work or lead your eye around the piece.
For example, the fish on this clock by Gera Scott Chandler are much lighter in value than the background, bringing our focus to them first. The light value of the circles on the background subtly connect to the larger fish since they are similar in value so that your eye moves from fish to circles, going around the face of the clock.
Furthering Your Color Consciousness
So, before I get into how to manipulate values – something we will get into next week – I suggest you spend some time getting familiar with the values of color. I have a couple suggestions for you.
Go Grayscale
To better familiarize yourself with the actual value of colors, I find it helpful to look at colors in grayscale. A grayscale image will show you the actual value of colors, relative to the colors they are grouped with.
This means taking photos of your work in “black and white” mode or changing color images (yours or other people’s if you want) to grayscale in a photo editing app or software. Not all cameras have a black and white (or grayscale) mode. If you’re not sure, look up your camera model online along with “how to shoot black and white” and if no information comes up, then it probably doesn’t have that option.
The other way to do this is to edit the image. To do this on your computer, use Photoshop or whatever default photo editing software is available on your computer.
- In standard Photoshop, go to Image> Mode> Grayscale.
- In Microsoft Paint.net, you go to Adjustments> Black and White.
- If you are using another program, search the web for “how to convert image to grayscale” along with the name of your editing program.*
If you take a picture with a mobile device, you can usually edit it to grayscale directly in the phone or tablet.
- On an iPhone or iPad, select an image, hit “Edit”, tap the three overlapping circles icon, then scroll the little thumbnails of the photo over until it is in “mono”. Tap “Done” if you want to save it but keep in mind it will save over the original. If you do this accidentally, just follow the same steps and you’ll find the original version in that little row of thumbnails so you can convert it back.
- In Android, and pretty much any mobile device, you can use Google photos. Open your image in this app, tap it to bring up the icons and choose the three stacked lines. Slide the thumbnails over until it is in “Vogue” mode. You can also save it and undo it later.
*Note: There are quite a number of articles online suggesting you convert an image to grayscale by using a “saturation” adjustment. DO NOT do that for this value exercise. As we will discuss next week, saturation has nothing to do with color value. Reducing saturation tends to also reduce value, more for some colors than others. It will completely mess you up. You need a conversion to “grayscale”, “black and white”, or “mono”.
If using software and apps is just too much of a bother or you don’t have a software program, here is a free online service. You just click the file icon, browse to and open the file, and it will appear in the browser window in grayscale. You can save it from there by hitting the floppy disk icon.
Once you have these grayscale images, start looking at how much value contrast shows in the images.
- Is there a lot of contrast or all the values fairly close?
- Does the amount of value contrast match with the probable intention or feel of the piece?
- Do any of the colors set next to each other just blend into one another because the values are so close? If so, do you think that works for the piece or do you think more value contrast could help it? (We’ll talk more next week about how to choose alterantives when you want a different value.)
Just make yourself more familiar with value. You can also use this value scale (click on it, then print it out) to check values of colors or pieces you have. You can lay the scale next to a color and see which value you think is the closest. Then take a photo of the scale next to the color, convert it to grayscale, and see how close you came to matching the color to the right value. Do this a few times and you’ll be seeing in values quite quickly!
Get a CMY Color Wheel
You know how I recommended you get a CMY color wheel? Well, the more I work on these articles, the more I wish you ALL had the CMY color wheel from the Color Wheel company. I can’t tell you how many times I reference mine, and I am convinced that when we get into how to use these color concepts to pick color palettes and to mix color, having this particular CMY color wheel will make it all such a breeze.
No, they’re not paying me to push this. I have met the owners and they are a fantastic little family company (who worked with the polymer community’s very own Maggie Maggio to help build a CMY based grade school art curriculum, by the way) but more than that, they are so intensely passionate about color and education. That’s why they’ve done such a superior job with this particular color wheel.
So, if you haven’t gotten one yet, you can buy it directly from the company for $9 (including shipping in the US) and you will have it within 5-7 business days. It’ll be the best $9 you ever invested for your creative journey. Outside the US, I am not sure where it is best to get them but you can search for “Color Wheel Co CMY” and look for this wheel:
https://colorwheelco.com/buy-now/product/cmy-primary-mixing-wheel-7-3-4-diameter/
Well, I hope you’ve enjoyed this immersive in value. I have to say I am always surprised at how much there is to talk about each characteristic of color. These articles really could be much shorter but I don’t know if you would walk away really understanding and feeling confident about these concepts. We retain concepts better when we spend some time with them. I’m hoping these articles do that for you! If you have any thoughts or suggestions about the length or detail of these articles, I am always up for hearing them. Just reply to this if you get it by email or write me through the website.
Wondering about my references to Intention? Or how to support this content?
Read what so many VAB members have said was a life altering (or game changing or mind opening) set of articles on Intention in the February edition of the Virtual Art Box and catch up on the concept of marks, lines, and shape too. And they are all on SALE, 25% off right now – no promo code needed. I’m also having a 20% off sale on ALL books!
The purchase of a box would help support this free content that I am creating now as well as give you a stronger base for the conversations we will be having going forward. You can help me keep the lights on by making a purchase of any of the publications I have on the Tenth Muse Arts website or by making a one-time or monthly contribution here.
Thank you for your past, present, and future support!
Read MoreAre you familiar with something known as the flow state? This is that space you get in where you are lost in your own little world because you are so wrapped up in what you are doing. It happens quite commonly when people are working on creative projects and it’s a really good thing for you, both because it dissipates stress and because it increases your level of “feel-good” chemicals like serotonin and dopamine. It’s also defined as an “optimal state of consciousness where we feel our best and perform our best.” Now, who wouldn’t want that?
I bring this up because I want to talk about mosaics. I think a lot of people look at all those tiny pieces and think, “That looks like a ton of work!” And, yeah, there might be a lot of steps to putting a mosaic together, but the technique is also one that really gets you deep into a flow state. It can be kind of like doodling but with little pieces.
It would not be a hard thing to start on. Most of us have access to tons of tiny pieces, either through leftover canes, unused polymer sheets, or failed projects we haven’t had the heart to toss out. Just slice up those canes, cut up those sheets, and/or start chopping up those cured elements and you have all you need to start creating mosaics. Of course, you can make pieces specifically for mosaics from fresh clay, too!
Mosaics have been on my mind these last couple weeks because, while working on the latest book, Polymer Journeys 2019, it became quite apparent that one of the bigger trends making a splash right now is polymer mosaics and so I thought we ought to take a closer look at this not so new but definitely interesting and flexible technique. (By the way, today is the last day to get the Pre-order Sale pricing on Polymer Journeys 2019! Go to the website to get it at 30% off the cover!)
Mind you, being the insanely creative and exploratory artisans and crafters that they are, polymer enthusiasts aren’t just slapping together any old standard expectation of a mosaic. They are mixing mediums, trying out every shape in the book, using three-dimensional forms, and generally just pushing the boundaries of what the mosaic technique is. Gotta love polymer crafters!
So, let’s take a look at what some people are doing as of late and we’ll end with suggestions for getting into the mosaic flow yourself.
Different Kinds of Bits & Pieces
One of the folks who, at least initially, takes a classic approach to the art form of mosaics but certainly adds her own flavor to it, is Christi Friesen. She cuts out squares of polymer, lays a base to adhere them to and then arranges the pieces in pleasing and energetic patterns. But of course, Christi can’t leave well enough alone — she has to add bling and embellishments of all kinds! She’s been mixing in glass, wire, charms, beads, and probably a bunch of other things I will never be able to identify, to create her whimsical tiles, vessels and jewelry. Can’t you just sense the depth of the flow state she must have been in creating this beautiful maelstrom?
You could say that Claire Fairweather is classically inspired too, but her work has a twist to it. That twist is a commitment to circles used to create these wonderful images of graduated color and varied texture. Using round elements instead of squares and straight-sided shapes that join neatly together, leaves more open space but it’s one that has a fairly regular rhythm that flows in and out of the carefully placed circles. This gives the imagery more orderliness and a softer look as you can see in the many sides of her mosaic globe below. (Be sure to jump over to her blog to get the rundown on what each side is showing.)
Keep in mind that a mosaic piece does not have to be all mosaic. Large swaths can be made up of other types of polymer elements such as textured, silkscreen, impressed, or hand tooled layers or forms. A lot of Susan Crocenzi’s work, especially earlier in this decade, consist of entire halves of her pieces being a kind of polymer landscape, surrounded by glass mosaics or a mix of mosaic mediums. Here is just one example below but you can find more on her website too.
For all of you mad caners out there, here is an example of how beautifully energetic a piece can be just by arranging thick cane slices on a simple form. This bib necklace is a yet-to-be-hung creation by Ivy Niles, who makes some of the most impressive canes. You can see how much more impressive they are when working together in this off-center mandala type pattern.
If you really like the idea of doing mosaics don’t relegate your sources of inspiration to the work of polymer artist’s, as unique as they may be. Take a look at what glass and tile mosaic artists are doing these days as well (just type “mosaic art” into your favorite browser or an image-centric site, like Pinterest or Instagram) if for no other reason than there is some amazing and gorgeous work out there to enjoy. Here is a gorgeous piece by Francis Green in what seems to be a rare piece of wall art. This woman will mosaic anything she can get her hands on! She kinda reminds me of some unbridled polymer artist with their canes. Just take a look at her website.
The How-Tos of Mosaics
So, are you itching to try some mosaics now? Here are a few places you could start:
- If you want to start with something classic, even, and orderly, check out this straight-forward mosaic tile tutorial by Korrina Robinson on her blog.
- Prefer a more open and visually textural approach that is flexible enough to use any type of clay sheets or even canes? Take a look at this mosaic vase by Kathy Koontz on the Sculpey website.
- If you’re ready to really dive in, might I suggest you invest in this great tutorial on micromosaics and faux glass by Pavla Čepelíková. The opening image of this post shows examples of some of the things she’ll teach you to make in this downloadable PDF.
- If you want to use mosaic as a way to diminish your pile of scrap clay and cured bits, take a look at Christi Friesen’s mosaic video tutorial here. You can also have fun creating mosaics Antoni Gaudi style on an unusually formed box with Christi in the Polymer Art Projects – Organic book (go to our website to get your copy!)
- And if that’s not enough, Christi sells mosaic kits on her website where you can also find tons of other embellishments and bobbles to assist in your mosaic flow. Just click here!
- I even have some exciting mosaics for you to look forward to too … We just found out that Staedtler/Fimo is going to sponsor Ann and Karen Mitchell, the Masters of liquid polymer clay, to create a mini mosaic tutorial for the next issue of The Polymer Studio magazine. This is a changeup to Karen’s tiny micromosaic technique published in The Polymer Arts back in the Fall of 2015.
Whew! I got into a flow a bit there myself writing excitedly about all this fun stuff. I hope you’ll give mosaics a try if you have not already, or at least give yourself some time to just get lost in your craft today. It’s good for the brain and the soul and you never know what will come of it later in your creative journey!
Read More
It will be hard to talk about squiggles and not talk about Julie Picarello’s mastery of the squiggle in negative space. Or peekaboo space if you prefer.
Julie’s impeccably controlled polymer mokume is full of squiggles both in the mokume pattern itself and in these wonderful little rivers she creates in her compositions. Perhaps that analogy is part of our attraction to squiggles—some of mother nature’s best squiggles are things we have long held dear, such as life-giving rivers and streams. Julie does such a beautiful job of re-creating this essence of flowing water in her signature approach to the mokume technique. I imagine that is part of the attraction to her work and the popularity of her particular techniques.
You don’t hear a lot from Julie these days. She is not an avid poster to the social media sites although she does have a presence. We were actually wondering what she had been up to lately ourselves which is why we’ve asked her to be the first artist to be profiled in the new The Polymer Studio magazine coming in January—and she’s agreed. So we will have an exclusive peek into her world for you to look forward to in January.
And yes, we are just about ready to get subscription ordering started for the new magazine. We’ve been ironing out some issues in the new website but stay tuned here and be sure to sign up for our newsletter to be one of the first to hear about the reveal of our new website.
You can take a look at some of Julie’s other designs in this technique on her Flickr photostream and don’t forget about her book Patterns in Polymer which you can purchase here.
Read MoreIt has recently occurred to me that 2018 has been a very, very busy year for a lot of people for a wide variety of reasons. I think all this high energy and the complexity of our lives these days may be coming out in much of the work and techniques being used of late.
The Flickr page of Jana Honnerová is one such page that is full of new work and is visually busy but in a wonderful way. Her photostream shows off her explorations in surface texture as well as the completed pieces resulting from some of those explorations. The work is a beautiful mix of of undulating texture and color, reined in with simple but carefully finished forms.
These bracelets here, with the busy surface texture of each bead, have a lot of energy but it’s not overwhelming. One might expect them to be a bit riotous with all that texture and change of color packed into the highly kinetic visuals of swirls. But because of her chosen color palette and the repetition of the evenly spaced beads, all of the same size and form, the energy is controlled, giving each piece that sense of sophistication that is a signature of Jana’s work.
You can see what else Jana has been up to on her Flickr photostream.
Read More