Flower Powered Polymer

May 5, 2019

Kathy McCurry, Bearded Sadie

Have you ever walked outside and been assaulted by a cloud of butterflies? Sounds like something that might happen in a dream, right? But it actually is happening here in Southern California. The first wave came through a month ago as Painted Lady butterflies traveled north on their annual migration only this time there were many more than usual, supported by the crazy wildflower bloom that we have going on out here. Between a very heavy rainy season and all the fires around here, the ground has been very fertile and supportive of tons and tons of mustard flowers, orange poppies, and purple lupines. So now, the next generation of butterflies, laid here by the first migratory wave, have grown, transformed, and are continuing the migration, with streams of them cavorting down the hills, rolling through backyards, and, strangely enough, traveling in clouds down the streets, following the asphalt rivers

So, of course, I had to get out in it (and out of the house) yesterday and now my head is full of flowers and butterflies. Which is weird for me. Although I love these fascinating and colorful gems of nature, they aren’t usually the thing that I turned to, especially when it comes to artwork. But, with flowers on the mind, I sat down to drum up something lovely to show you this week and came up with all kinds of polymer flowers, but not quite what you’d expect.

Let’s look at how people are switching up this most common and enduring subject for artistic inspiration.

Flower Power

first of all, if you read last week’s blog, you know I wanted to focus on mica shift techniques on my own studio table this past week and challenged you all to try a little yourselves. Well, I did get started but it was a tough week for getting things done. However, that post initiated a number of experimentations in a slew of other artist’s studios as well. It does seem that a majority of people are still in the experimentation stage so I will hold off sharing any results until we all have something more complete.

What did happen though, was a lot of online conversations as people shared their work. One such online chat was with Kathy McCurry, one of our most creative floral polymer artists. I am really excited to see what she comes up within mica shift for her flowers as they are already so intriguing. Kathy creates pieces that could be nothing else but flowers yet they are like nothing you ever have, or ever well, see on this earth. They are eye-catching, colorful, shimmery, and crazy exotic looking, as you can see in her piece opening this post and the one below. Being Cinco de Mayo today, I thought these Fiesta flowers would be an apropos example.

It is always hard to pick just one or two pictures from a talented artist like this so please to click over to her website to see more of her work if you’ve not seen it before. You can also find her featured in Polymer Journeys 2019, and she’ll be in Issue #3 of The Polymer Studio. with a bit of a personal story. You can buy the book or subscribe to the magazine (Issue #2 was released last week and is ready to ship if you need a copy!) on the website.

 

Other creative and beautiful, yet not-found-in-nature flowers made in polymer can be found in the studio of Ann Duncan-Hlavach. Ann has a habit of making up her own patterns for petals from just about any source of inspiration besides actual flowers, resulting in some really delightful combinations.

Here is an ode to the Monarch butterfly (since butterflies started this, it seemed like I should bring them in here somewhere on this post), but in a rose shape. Don’t you love the translucent quality of the “wings”? The translucence glows when light hits it. This makes for truly stunning and unusual bouquets as you can see in a wedding set of hers that made it into Polymer Journeys 2019.

 

Just how else can you mix and match inspiration for flowers? Well, the possibilities are endless, and sometimes even frightening! But in a good way. There are few people who have taken the light and delicate nature of flowers and melded them with the far end of the spectrum quite like Anastasiya Khramina. Here carnivorous flora are at once beautiful and horrifying. I do have to wonder what inspired her to add vampiric teeth and a forceful tongue lolling out of her flowers’ centers. And yes, this is not a one-off thing for her. Most of her posted creations are sharp-teethed flowers. I posted one of her pieces a year or so ago and it was one of the most viewed post of that year. I guess us humans will always be drawn by beauty, especially when it is combined with what scares us.

 

Now, if you really would prefer to go the more traditional way and have realistic looking flowers for adornment, you can do so while still taking it up a notch and showing up mother nature herself. Just come up with a color combination and arrangement nature hasn’t quite gotten around to creating. See how Vera of Etsy’s Handmade Blossoms does it … in pastels or a full and bright rainbow.

 

But, perhaps you, like me, are not so much into the flowers but you do love the shapes and forms of them with their layers or rows of petals, and the balanced swirling repetition of their arrangement. Those formations do not only come in flowers. Albina Asadullina popped an extremely realistic succulent onto the focal point of the pendant instead of a flower as one might expect. It has a bit more substance and so is not quite as delicate looking as most flowers but it visually has the same effect for the piece.

 

Moving on From Flowers

To quickly wrap this up, I’m going to let you do further research as you are inspired. I am utterly exhausted by a long arduous week of decision-making, further house rearranging, and trying to keep the dust at bay. Here I am in the middle of what once was my kitchen, contemplating the problem plumbing which instigated this whole thing. I now spend my entire day in my studio (and my nights this week since I have to sleep here for the time being too!) which wouldn’t be that abnormal or too bad if the family didn’t all have to retreat here too when they are home as it’s still a bit nippy outside. We are making the most of it and looking on it as a challenging adventure. Now I just need to figure out how to get work done amidst this all!

The Polymer Studio, Issue #2 … click the image to see a sampler edition

Get oodles of inspiration and have fun with the many intriguing projects, artist interviews, studio tours and other tidbits in the latest issue of The Polymer Studio. Click here to see a sampler of it.

 Looking for your already purchased copy?

If you are due a digital edition, the access emails went out on Tuesday but if you didn’t see yours, check your junk mail folders or go to your account where you can access it. You can also write Sydney, my keeper of lists, from there if you have questions.

Print editions of the new issue went to the post office Wednesday  directly from the printer if you were subscribed or pre-ordered before April 22nd. My shipment has been delayed but I should have them Tuesday so recent orders will go out then from here.

 

 

I hope you all have a wonderful week full of flowers, butterflies, and lots of not-so-challenging adventures!

 

A Dramatic Shift

April 28, 2019

Pier Voulkos boxes

Of all the fabulous polymer clay techniques, which would you say is the most dramatic? There are certainly a lot of them that can be bright and colorful, shiny and sparkling, dramatic and graphic, but could you pick out just one that you think has the most impact when first seen?

I have to say, the one technique that really pops for me is mica shift. It can be colorful, shimmery, and quite dramatic, and has the added effect of looking three-dimensional when it is not. And who doesn’t love a visual illusion?

Mica shift has waned in popularity of late. I’m not sure why because it is just such a gorgeous technique. But when I started researching the idea of making mica shift the theme this week, I found myself on really old posts and pages, looking at work that was created 10, 20 or 30 years ago. That made me all the more determined to bring this technique’s wonderful effects back into the limelight here.

For those unfamiliar with the technique or how it works, here is a little history and explanation for you.

The effect itself is a result of manipulating the mica in metallic clays into orderly layers that you can then manipulate in a controlled manner. This can be done because mica, a shiny, silvery, layered mineral, forms tiny flakes when ground up. The flat side of these flakes are reflective, but the sides are not (like a mirror.) So, if mica is flat side up, it reflects light, but a stack of mica seen from the side is just dark.

You control the mica in your clay by conditioning it in a pasta machine, folding the sheeted clay in half and running it through over and over. The pasta machine rollers, squeezing the clay down, also nudges the flakes to lay flat. Eventually, all the flat faces of all those tiny flakes are facing up in the sheet, causing it to be reflective and shiny.

So then imagine what happens to all those perfectly flat flakes if you press something into them? The flakes get tilted, showing their dark sides (gosh, sounds like some people I’ve known!) That’s where the control comes in. You decide where to distort that perfectly flat sea of face up flakes with a texture sheet, a blade, or hand tools, and where there is distortion, there will be dark outlines of tilted mica. Those outlines are there under the surface too, as the flakes, like tiny dominoes, knock each other over under the invading lines of a texture sheet or a hand tool.

You can also just play with the difference between the shiny surface and the dark sides by stacking mica sheets and cutting it up, rolling sheets into a cane, or twisting or folding a narrow stack, just to name a few approaches. In these cases, the sides of the original layers stay dark and the surface stays shiny, so you have dramatic contrast.

Mica shift in polymer has been called by other names over the years. One of the original innovators of this technique, Pier Voulkos, (those are her boxes opening this post) called it her “invisible caning”. Later, Karen Lewis referred to Pier’s technique as chatoyant, a French term meaning to shine like a cat’s eye, which is used in gemology to describe the bright reflected bands of light caused by aligned inclusions in a stone. That’s certainly fitting for polymer mica shift too.

Let’s take a look at some truly dramatic and lovely examples of this technique.

Shifty Ideas

Around the same time period that Pier was experimenting with her invisible canes, Mike Buesseler was playing with mica clay sheets and “ingots”, stacking then cutting, twisting, texturing and curling up sections of these sheets and ingots to create beads and surface design.

Here is a beautiful necklace using a very simple technique of twisting a square strand of stacked mica sheets.

I would explain more about Mike but, instead, I’m going to let him explain for himself in what is, to this day, the best video class that I have ever viewed. No joke. I’d rather you stop reading this post and watch that video, if it’s all you have time for today. The video is well over an hour-long and it is twenty years old but, no matter how long you’ve been working with polymer or how much you think you know about mica shift, it is well worth your while. It also has an interesting little story about how it came to be a free master class for all. Check it out on YouTube here.

 

Grant Diffendaffer has long been my polymer clay hero. His mica shift and designs are breathtaking. Although he worked with techniques derived from all the early developed mica shift techniques, his most impressive are his impression pieces. This type of mica shift, sometimes called “ghost shift”, is created by impressing a texture into a sheet of well-conditioned mica clay and then the raised layer of clay is shaved off with a very sharp tissue blade making a smooth surface but leaving the illusion of dimension. Grant created his own texture sheets and then applied them to mica clay Skinner blends. His choice of blended colors surrounded by textured black makes for some very dramatic pieces.

 

Some of the most dramatic and graphic mica shift you’ll see to this day comes from the studio of Dan Cormier. A lot of his effects come from cutting and puncturing straight down through the clay. When using a blade, the clay shifts only in the cuts where the blade separates the clay causing just a hairline distortion and thus, very thin dark lines. Puncturing shifts more clay as the tool pushes clay aside to get through. The advantage of these distortions, however, is that the design is present and consistent all the way through the stack.

 

Here’s another take on mica shift from my own table. These gauge earrings might seem a bit more shimmery than a lot of mica shift as I add plain mica powder (bought from handmade cosmetic suppliers) and translucent clay to my metallic polymer clay to bring up the shimmer a notch. These are created from Skinner blend sheets that were stacked, twisted, and rolled smooth before curling them up. They also receive a lot of denim buffing. My mica shift effect is actually the same basic technique that Mike used for the necklace you see above but I twisted it tighter and rolled it smooth with an acrylic plate.

 

Just so you know, 3 of the artist’s mentioned here no longer work in polymer clay which is why you aren’t getting the abundance of information and links I can usually offer. Pier, Mike and Grant are all multi-disciplinary creatives who moved on to another creative form—Pier returned to dancing, Mike to music and Grant has stayed in crafts but has been exploring a variety of materials and forms. Regardless, we can sure be grateful for their time with us!

 

Curious Shift

If this little discussion of mica shift has you anxious to get to the studio table and try it out, I heartily encourage you to do so. In fact, I would like to challenge you all to create a little (or a lot) of mica shift this week. I’m going to do the same, creating some new designs with ideas I came up with after researching this post. I’ll share what I’ve done next week and post them to my personal Instagram page.

Do you think you can you get in one mica shift project before the end of the week? Try it and then please send me a photo or link you would be willing to share online, and I’ll see what I can share at the end of next week’s post. You could also just post to Instagram and tag with #polymerartschallenge or message me on Facebook at The Polymer Studio page or write back if you’re getting this by email.

If you have some great mica shift pieces to add to the discussion, leave a comment at the end of the post for us to check out.

And with that, I have to run. Its been a crazy week. There were some problems with production  and getting Issue #2 of The Polymer Studio wrapped up (the release for the new issue will be in a couple of days, April 30th, so keep an eye out for it in your inbox, if you have a digital edition coming, and your mailbox in the weeks to come. Or subscribe or order the issue on our website!) and then we’ve been having problems with the city getting our plans through so we can move forward with the renovations here at the house (many people are still rebuilding from the huge fires we had in November, so they are busy beavers at the planning offices) but, finally, the demolition begins tomorrow and there is still a last few things to prepare. Good news though … we put the refrigerator on the porch instead of in my studio! Yay! We moved the liquor cabinet in here instead. MUCH better idea. I think. Or will it be weird that I can pour a glass of port without leaving my chair here? Well, we shall see.

Until next Sunday my dear readers … have a wonderful week!

 

 

Splitting the Difference

April 21, 2019

Happy Easter or Chag Sameach or simply happy Sunday to you! I wasn’t sure I was going to get this one out between holidays and family and wrapping up the latest issue of The Polymer Studio (there has been a slight delay with the printer so we still have time to get you on the list for the first shipment from the printer if you subscribe or pre-order before Monday night  … go here to get yours) and picking out shower and floor tile (yes, there is a tad more drama at Tenth Muse headquarters, a.k.a. home, which I will expound upon at the end for those of you find it humorous to see what craziness I’m steeped in.)

So, have you ever been in the middle of a busy, stressful, crazy, chaotic day and then all of a sudden you just are coming up with new art projects from out of nowhere? Well, yesterday I was in this ginormous tile shop, putting white tiles against dark tiles and smooth stone surfaces next to busy mosaics trying to see what works and, of course, being so design focused, when it didn’t work I would ask myself why, and when it did, I asked myself why as well. (My mind is like a three-year-old… Why this? Why that? Why…?) This led to considering how I pair up surfaces in my own artwork. The fact is, I don’t do a ton of it, but I do really like it.

I think this also came to mind because I had the pleasure of online chatting with Kimberly Arden, a potential contributor for a future issue, and she showed me some of her pendants and earrings which are often a split canvas – one side is busy with canes or extruder veneers and one side is a lightly textured black with a flower or other form laid on it in using just a few canes, like the one you see opening this post. So, I’m there comparing tiles and thinking about her pendants which got me thinking about how often we pair up surfaces in art and next thing you know, I’m writing you this post with all this in mind. That’s how these themes happen!

So, let’s just ponder the idea of having two different surfaces next to each other on the same canvas or form. How is this done to in a way that still creates a cohesive piece and what are the different ways this can be applied?

 

Splitting the Canvas

Two or more different surfaces on the same canvas or form is a great method for creating contrast but like any other element, two surfaces that are not alike do have to have some kind of connection to make them work together in a piece. Yes, that connection is there physically when the surfaces are within the same framework in or attached to a singular object, but that is not usually enough. The best way to ensure a connection is to have at least one design element that is the same or very similar.

For instance, both sides could be the same color but very different textures. Olga Bulat does this in this necklace. Making it monochromatic keeps us focused on that texture and that difference which creates the energy in the piece.

 

Now, Olga could have had two different colors in the above piece but the colors themselves would have had to have some commonality. For example, both sides could be pastel, or both might be similarly bright. They could even be next to each other or completely opposite each other on the color wheel (because complete opposites also connect in our mind as being related but in an opposing fashion, if that makes sense. Think how much green and red there is at Christmas time. It works, color wise, right?)

Below is an example of using different colors but with the same texture so that there is commonality in the texture, but at the same time, the colors are also completely opposite (a dark, rich, warm brown versus a light, colorless, cool gray). These opposites are paired in our mind the way good and evil, young and old, and night and day are paired conceptually.

This is the genius of Meisha Barbee who also puts the canvas split on the horizontal (notice how many of the examples I show you today are split vertically – vertical has a lot of energy but it doesn’t mean that vertical is right for every piece.) Just changing the color however does not give the work a ton of energy so she adds a band of multicolored spots. I added a few more examples below the first pendant so you can see the various ways she pairs up the competing sides of the canvas. She uses large bands to separate when the surface pattern is subtle but goes for a simple slim line on the one with a bottom half already busy and full of extruded canes slices.

 

And speaking of changing up directions, you can also change up the point at which they meet. It doesn’t have to be a straight line or a simple curve Here is a simple design, actually done in terra-cotta, offered by a website called Tradenimbo. The zigzag line splits up the two sides with enough energy to carry the simple graphic look. Note how the pendant is the stronger design between it and the earrings, with the dots being a place of focus and rest for the eye as it jumps back and forth between the two sides.

 

Juxtaposing two different surface designs doesn’t mean it needs to be on the same canvas facing the viewer in the same direction. It could be on something three-dimensional so that the viewer has to walk around to compare. Or take it a step further and have a different surface on the front and back or get really ingenious and make it a curved surface so you can see both sides at the same time as Arden Bardol does with these whimsical earrings of hers.

 

You can also contrast different surfaces by creating one surface on the outside and another on the inside. Martina Buriánová did that here with two surfaces contrasted in pattern and treatment, yet with similar or highly contrasting colors which make a strong connection between them.

 

 

Splitting up is Not Hard to Do

If you find these contrasting surfaces interesting, click on any of the above artist names to see additional pieces for further inspiration. Then get to work trying your own!

Here is a simple series of steps you can try right now … A Cane Split Canvas:

  1. Choose a cane (or a few canes that go together) and pick a base clay in a complementary color.
  2. Roll a thick sheet of the solid color and apply canes to just one section, trimming or lining them up to create a boundary between a cane side and a solid clay color side.
  3. Burnish the canes into the clay sheet so the surface is smooth.
  4. Then, texturize a similar sized section next to the canes. You can use something as simple as sandpaper or add lots of tiny dots with a hand tool or stripes or lines or whatever you like, but I think you will find it more successful if the texture is very different from the canes. So, for instance, if you applied a series of flower canes with dots in the center, don’t texturize with dots but rather create something quite unlike anything in the flowers, such as a lot of orderly vertical lines or go for the randomness of a filter sponge texture. The cool thing about applying texture here is that if you don’t like it you can burnish it away and try something else.
  5. Once you have a texture that you like, use a cookie cutter, first as a frame to find the section to cut that includes the two sides– it doesn’t have to be half canes and half texture. In fact, 1/3 to 2/3 will probably look nicer in many cases. Move your cookie cutter around to see what you like.
  6. Once you find the section you like, cover it with plastic wrap and cut with your cutter.
  7. Your new split canvas form can be used as the beginning of a more complex piece or punch a hole at the top and you have a pendant or the first of a pair of earrings.

Now, if you want to splice together two different sheets of clay onto the same piece, you might want to check out this tutorial by Samantha Burroughs.

You may also want to take a look at the first issue of The Polymer Studio for the great tutorial by Julie Picarello who has a beautifully simple way to splice together a mokume gane slice and simple textured clay.

Got any great split canvases of your own? Share it with us by leaving a comment or a link at the end of the post!

 

Now for the Great Tile Adventure

Story time! For those entertained by the little dramas of my little life.

So, as you might have read in previous posts, we have been forced to do a kitchen renovation earlier than planned, in part because of a drain that collapsed under the slab on the kitchen side. The bad news came when the plumbers came out to plan the job and determined that the drain in the master bath was about to go as well so in addition to the kitchen, we have to tear out the shower in the bathroom. Oh, joy!

Actually, we were kind of happy about this because we really dislike that shower. It’s like a tiny tile covered phone booth, which is great for singing in but, not big enough for even a tiny mobile recording studio to make that worthwhile, it’s otherwise rather claustrophobic feeling. This is not to say that the news and the added cost to the budget didn’t give me a few more gray hairs, but I won’t be sad to see that go.

So, after spending two hours in a tile shop yesterday, mostly searching for just the right basic white but still subtly veined tile (veins in a cool, not a warm gray on a cool but not bright white – we are both artists so the color conversations have been quite intense) to go with our more dramatic accent choices and coming home and putting every tile sample we bought up against the wall, and not finding any to be quite right, I went into my studio for something and there in my stack of tiles on my studio table was the exact pattern of tile we were looking for. And I’ve been curing clay on it for the last six years! Now we just have to see if we can find eight full boxes of it somewhere!

Here I am giving my better half the not so great news that our ideal tile came from my studio stash and I don’t remember where I got it. But at least we know what we like!

I’m also, by the way, designing and making our kitchen backsplash which will, of course, have polymer in it somehow. So that should be exciting. Especially the part where I have to figure out how to carve out the time to do actually make that happen. But I will!

So, with my head full of tile images, I say goodbye to you for now. Have a wonderful rest of your holiday weekend and a great coming week.

A Big, Bold Challenge

April 14, 2019

Kathleen Nowak Tucci, Secret Garden Necklace

Have you considered challenging yourself creatively with something you’ve never done before, or at least not for a long time? I have a lot of creative friends who are doing just that right now and, as I work towards having free time again after an exceedingly busy couple of years, I am too considering what to start in on. My mind, probably like yours, never stops churning up ideas so the designs in my head and in my sketchbook have progressed into a variety of new possibilities. The question is, what do I challenge myself with first when I can get back to creating my own artwork on a regular basis?

Whether or not you are at a similar crossroads or want to change up what you’ve been creating, I encourage you to consider the question of how you could challenge yourself as we go through some work that is very much unlike what I have done in the past. I am hoping that, going through some of my own possibilities, this might start those wheels turning for you. What, if any, pieces here feel like they are in the same vein as your present work and which of these approaches have you’ve never imagined yourself doing but might consider?

Not Sage

I, like the vast majority of polymer artists, work primarily from organic inspiration. (See my post from last month about man-made inspiration for contrast.) A lot of my work is also rooted in story, particularly speculative stories dealing with the human struggle in both usual and unusual circumstances. It’s emotional, and personal and not at all neat and tidy. So, this means that certain styles of work almost never cross my mind as options. But that doesn’t mean I shouldn’t try it.

Highly graphic work is one of the things that I’ve never done. I have no aversion to it and, in fact, really enjoy beautifully crafted and highly graphic artwork. I have even drawn particular elements as inspiration for aspects of my work, both in polymer and in graphic design, from the likes of Mondrian, Mucha, and even graphic novels. But I have never designed any highly graphic art work.

If I did aim for a more graphical approach, it might be something like Jana Lehmann’s colorful and fun pieces, with clean lines but still plenty of blended color and subtle color variation to make the colors glow and give it the calm energy I gravitate towards. I could see trying to create cleaner lines and using purer color and standard shapes although I think the organic would find its way in at some point.

 

Aren’t those flowerpot pins just adorable? That brings up another thing I don’t do much of. I don’t do cute. Which is strange because I love cute! Although I am kind of picky and maybe a bit odd about the cute that I enjoy. So, if I were to try to create something cute, it would probably be cute with a dark edge to it. Maybe something like these Bitty Bitey Ones by Darcy of North Carolina. Just look at these faces! The big black bead eyes help but it takes some serious sculptural instincts to get such great expressions. The cuteness factor is through the roof! Could I work on my skills long enough to create something even half as cute? Would I want to? Won’t know unless I try, right?

 

There is one thing though – I just couldn’t create such pieces in pink. Now, I have made some pink polymer jewelry in years past, mostly because of requests, and it did sell well but it didn’t do anything for me. Been there, done that, got the t-shirt. But the important thing was that I tried and found out I just didn’t want to. That period did get me a touch more comfortable with the color so when it turns up incidentally in a blend or interference powder, I don’t just set it aside. The thing is, it’s not just pink that I steer away from. I don’t, in general, work in bright colors. But I’ve really been thinking that more saturated colors are something I should push myself into trying out.

Maybe I could do something like Jana’s super saturated color schemes above or, go completely over the rails and aim to mix-and-match a little bit of everything in one piece like Susan Dyer so expertly does. Talk about graphic! Her use of solid colors and highly contrasting patterns could be sniped from Bauhaus prints. Her compositions often teeter on the edge of chaos but the confining silver bezels and the consistency of her unmuddled approach to color and pattern creates cohesiveness.

 

One of the reasons Susan’s work appeals to me is because it’s not actually that big – the pendant above is all of 1.75” by 1.5”. I also tend to design jewelry that works as an accent or embellishment for the wearer rather than it outshining a person. But I know a lot of polymer artists prefer large pieces as one can really show off the surface design and techniques that way. And, honestly, I would love to do some really large jewelry but since I generally wouldn’t wear anything really large, it’s hard for me to envision what a wearer of this kind of work would want, and I think that makes me hesitate to the point that I have not tried.

I have been trying to work up the courage to go big by taking a close look at the work of big and bold artists like Kathleen Nowak Tucci. I love her work because it’s not only unabashedly large but it’s also, in part or almost wholly, created from recycled materials, such as the Saul Bellow award winning piece of hers you see at the opening of this post. And talk about going big … her work has also appeared on several big TV shows including the multiple times her work adorned the immensely talented Lily Tomlin on the show Grace and Frankie. You can see both Kathleen’s Leaf Necklace and Pistil Bracelet on Lily here.

 

What’s on Your List?

There are a number of other things I could try to push my work outside my comfort zone but these are presently on the top of my list.  So, now that you’ve seen the top of my list, what do you think you would you be willing to try out that you would not normally do?

Keep in mind, this self-challenge is not designed to change your style but to just put yourself, and hard, to see what you come up with. There is the potential for as yet unimaginable discoveries about yourself and where you want to take your work. It can be a way to inject some fresh new energy into your studio time and, since there is no end goal such as even showing the work to anyone or selling it, these explorations can give you the freedom to just push yourself in unselfconscious directions.

Are you one of the ones that have been doing this already this year? If so, maybe you’d like to share what you’ve tried to do and how you like the experience. You can insert a comment at the end of the post to let me know. Maybe when things slow down over here in the chaos it is my home at the moment, we can devise a midyear challenge for us all to work on. What do you think?

 

A Bit of Business … Last Chance to Subscribe and Get Issue #2 Directly from the Printer

If you haven’t subscribed or renewed your subscription to The Polymer Studio, you will want to do so by end of day Monday as we send off the mailing list to the printer to Tuesday morning. Be one of the first to get the new issue in your hot little hands by subscribing or pre-ordering your single issue now.

Your subscriptions and purchases support what I do here so if you like the blog, help me keep it going while also continuing your artistic education with our highly informative, entertaining, and rather pretty publications.

 

Back to the Chaos

Ok, gang, I have to get back to wrapping up the next magazine issue while navigating my discombobulated house. The chaos is in a holding pattern while we wait for the city to get the plans back to us. There is a ton of construction still going on due to the fires in November so things are a tad busy over there. But at least we figured out how to NOT have the refrigerator in the studio although it is just outside my door, just looming over me. So my present challenge is not to open that thing every time I have to squeeze by it!

As for you, my darling readers, I hope you are enjoying your weekend and have a fabulous week to look forward to.

The Lure of Creative Spaces

How do you feel in the space in which you create? This has been on my mind quite a bit lately – not just the function of a space but how it feels and even how it represents us. I’ve decided to let that thought guide us into a slightly different type of blog this week.

As you might have read in the previous post or two, there are some changes going on at the homestead here where Tenth Muse Arts is based and we’re about to start tearing out walls and then, of course, rebuilding in that space. So, of course, my husband and I have been asking ourselves, “What do we want in this space?”. Well, we want a lot of things but there is a budget, and it is not particularly large, so we have been talking through what is most important to us. It has turned into a very interesting conversation, one that goes beyond paint colors and cabinet styles.

After addressing the functionality of the space we have to repair and rebuild – because of it doesn’t function nothing else is going to work out well – my husband and I followed the logical path and started talking about color, materials and placement. By the end of the conversation though, we were talking about emotion. It may be because we are both artists that we backed out to ask how we wanted it to feel followed by the details that would make the space fulfill that wish. This is the space we live in (and where I work as well) and we want the home to feel comfortable, like shrugging on a comfortable but well-tailored coat that hangs great and hugs you in all the right places.

With this on our minds, Brett walked into my studio the other day and simply said “This just feels good.” And I knew why he said that. This is what we are after. Not in the style or color scheme but the inviting, comfortable feeling of the space. I have to agree, my work space does feel good but it has not always been so. It’s taken me a long time to realize the importance of creating a space that is as comfortable as my favorite coat, arranging things not just to be functional but to feed my spirit as well.

Up until we moved here a couple of years ago, I had always worked on the business and created my art in a basement or a garage – some kind of windowless, very utilitarian space (the opening photo is a shot of my windowless basement studio in Colorado) – primarily because it was the only unclaimed living space available. Although I would try to decorate, it was never a priority so it mostly didn’t happen. However, those kinds of spaces could be very hard to work in as I usually worked every waking hour there and it would get depressing, not being able to see the outside world. It would make me restless and that wasn’t good for productivity. But what choice did I have?

As it turned out, I have a lot more choices than I allowed myself. My husband made me see that. He is an animation artist and director as well as being the son of antique dealers. Both his vocation and upbringing are in things that consider space, a lot.  Telling a story in animation is very dependent on how the characters and the viewer’s eye moves through the space of the frame and antiques are about decorating and so he is always arranging and rearranging the house and coming home with things to bring in more personality.

Watching him made me think about my mostly utilitarian space and how little I did with it. So, with his help, I started bringing in plants to sit in the cold corners and printed fabrics to drape over the bookcases. We even pulled in an old oriental rug to go under my non-polymer desk area. It changed everything. This was when I was working in a garage (so yeah, the plants were fake or under a grow light but then, I had the look of sunlight in the corners!) When I got the wonderful space I now work in, I really took it up a notch and so now, yep, it just feels good!

Many of you are probably in situations where the space you create in may not ideal however, you can still make it your own and you can still make it feel good, inspiring, and a place that makes you happy. What that means is up to you and what is most important. You might want it very organized with matching furniture and color coordinated accents to make you feel good or you might like the freedom to make a mess on your thrift store tables and mismatched storage bins. You might prefer to stick with utilitarian but keep a collection of favorite things on a nearby shelf to inspire you.

The question really is, have you considered what you can do with, or to, your space to make it feel good (or better) to you? Because a comfortable space is far more conducive to being productive and creative than one that is cold, cramped, awkward, or just boring.

To that end, this week, I’d like to peek in on some studios.

 

The Grand Tour

To start us off I’m going to  I pulled this out of an hour-long bonus video I gave to continuing subscribers from The Polymer Arts and adventurous new subscribers to The Polymer Studio magazine late last year. This is a jazzy visual tour of my studio and office space, complete with boppy background music, a peek into the backyard retreat just outside my door, and an introduction to my furry in-house staff.

You’ll see I’ve stuffed a lot into this one room and it’s two walk-in closet areas, but I’ve been sure to include touches of things that make me happy everywhere. From my collection of oddities on the mantle to the jars of random materials on my jewelry cabinet to the display of all my SLR cameras from over the decades, the space is very much me and is a joy to go into every day.

 

I personally have always been fascinated with the spaces people create in. They feel so personal, like a little window into the mind and soul of that person. So when I first started The Polymer Arts back in 2011, I knew I wanted to do an issue all about the spaces that we work in. I figured it would be of interest to others as well, not just for voyeuristic reasons, but because it could make us feel more connected. And I sure was right! The Spring 2012 – Creative Spaces issue sold out in print quicker than any other and is still one of the most downloaded of our digital back issues.

You can really see the personality of the artists that participated in that issue. For instance, it was no surprise to see that Christi Friesen’s space was full of knickknacks and collected bits of art and all kinds of books. She is a high energy person and with an insatiable curiosity so it makes sense that she should surround herself with things that she loves and that inspire her. You can see a bit of this in the first page from her section of that issue.

 

By the way, Christi is actually between studios right now, or you can say the whole world is her studio as she travels all over this year, searching for the answer to how one keeps creating while traveling. You can follow her shenanigans replete with mini classes and demos in her new members only Virtual Creative Experience here.

When the photos from Leanne and Paul Stoddard at Swirly Designs came in for that Spring 2012 issue, I was not surprised to see the orderliness and organization of their studio. The ornaments they create are designed with tremendous care with a focus on whimsy – and so is their space. Their studio looks like something put together for an interior design TV show with its coordinated color scheme complete with matching white furniture and energetic sparks of red tucked in here and there. Oh … and lots of Christmas trees, just everywhere!

Now, when I asked Bettina Welker to share her space, I was not sure what to expect. As it turned out, she was also working in a basement like I was at the time. The importance of functionality is obvious and there is not much room left for decor but she has a great wall of sketches, photos and and design ideas that she keeps up for inspiration. It actually inspired me at the time to create something similar for myself. It makes so much sense!

 

All these studio peeks are fun stuff, right? The popularity of that issue always stuck with me, so when I was determining the concept of the new magazine, I decided that the spaces that we work in should be a regular feature and that’s how the name, The Polymer Studio, came about. The next issue of The Polymer Studio, coming out in a few weeks, features Christine Dumont’s studio and the interesting journey she took to create the space she now works in. (We’ll be sending in the mailing list for the first round of the new issue to be mailed directly from the printer  on Friday, so get your subscription or pre-order your copy now to be one of the first to get it in your hot little hands!)

So, what is your approach to how you set up or decorate your creative work space? Even if you can only snag the end of the dining room table after dinner, that corner should be conducive to productive creativity. Maybe you can keep some of your favorite pieces out where you can see them to be motivated by your successes. If you can, hang pictures or put out objects with colors, textures, and forms that excite you. Make your space as physically comfortable as you can and reconsider the placement of your tools and materials if getting to them is difficult or even just a minor hassle. Doing a little spring cleaning and reorganizing and reevaluating your space might be just the thing to add that extra spark of energy and excitement to your creative time and your work right now.

 

More Voyeuristic Opportunities

Here’s a few more links to other studio tours for you to peer in on. Even if you studio is just how you want it, peeking in is just fun.

In 2016, Katie Oskin of Kater’s Acres invited people into her studio with a personal tour video, seen below. You’ll notice that she also has a couch in her studio. I know mine feels like such a necessity now. Can you fit one into your space? Or do you have one already? (If you have one, leave a comment! I’d love to see how many of you also thought a cozy sitting (and nap!) space was needed.

 

Ginger Davis Allman takes you into her studio on this post of hers but it’s focused on her tools and materials more so than the physical space. But doesn’t that tell you a lot about what’s important to Ginger?

And here’s a post full of photos of Debbie Crother’s studio. You’ll read that she’s really big on recycled and environmentally friendly furniture and organizers. She also  has a lovely, dedicated display of her work. But what strikes me is that she has sooo much space! Having a builder for a husband sure has it’s benefits!

 

Okay gang… I have to run off now. I need to finish putting together the next issue of The Polymer Studio (and finish clearing the kitchen for demolition!) If you have not subscribed to the magazine yet and have had any inclination to do so, I would so love for you to join me there. You subscription and book purchases support the creation of this blog and all the artists that we are working to support in turn, plus you get inspiration and tons of eye candy for yourself!

In the meantime, have fun considering what more you could do with your space to encourage your creativity and enjoyment of your time creating. If you’ve posted about your space anywhere we can go check out online, leave it in a comment here. We’d all love to come e-visit!

The Contrast Conundrum

What would you say is the area of your craft that you most need to work on? Is it a skill that you want to acquire or improve? Is it simply getting yourself to do more work more often? (I know that’s one of mine!) Or is it some particular approach to the work that regularly seems to baffle you?

For me, I have always struggled with contrast. It’s not that I don’t like contrast, I just tend to like it done subtly. But if I am too subtle, the work lacks energy. On the other hand, if I consciously push it too far, it doesn’t feel like a genuine expression of mine. So, the idea of contrast is often on my mind when I am working.

First, let me correct a misconception that some people have. You do not have to have a high contrast in your work to create a good design. There can be little to no contrast in a piece and it can still have a beautiful design. Contrast is about the degree to which elements such as color, texture, pattern, shape, size, etc. are dissimilar or alike. Like anything else in design, good use of contrast comes down to making an intentional decision about how you will use it in your work.

For instance, high contrast tends to be high-energy and bold while moderate contrast comes across often as refined or restrained, and little to no contrast tends to be quiet and reserved. These descriptors are not always true because the level of contrast plays differently depending on what design element is being contrasted and how it works with (or against) other characteristics in the work.

Okay, enough jabbering on about these abstract concepts. Let’s look at some examples and get those little gears in your head turning as you ponder how you use contrast now, or how you would like to be using it.

Compare and Contrast

One of the most common ways to develop high contrast, especially in polymer, is with color. From canes to mokume to silkscreened veneers, high color contrast is the only way to have the effect of some techniques even show. But at the same time, minimal color contrast with little value change can result in lovely but subtle marbling, it helps support the dreamy feel of blended alcohol ink techniques, or allows us to showcase texture or form while color is relegated to a supporting role.

One of the most foolproof ways to use color for contrast is to go black and white. But if you go that extreme, you will probably need to heavily play up other design elements such as form, pattern, line, or texture. Or, you can put other colors into play.

That’s basically what Lynn Yuhr did with this earring and pendant set. The primary high contrast is a black border surrounding a white background. That’s simple enough, but then she throws a variety of colors in there, both warm and cool ones from across most of the color wheel. Then she goes for contrasting shapes by including both the softness of circles and the sharp angularity of triangles. Not only that, (this is really a piece all about high contrast!) she includes both solid shapes and thin lines. Some shapes are floating and unattached while others are overlapping, and some lines are solid while others are dashed. Often, this much variation can become chaotic and ungrounded but everything here has clean, defined and very graphic edges and she only chooses 2-3 variations of each design element. But the most grounding aspects are the black frame holding it all in and the swath of white being the common “floor” that this is all scattered on. It is energetic and yet contained, fun but still sophisticated. You can see, in the opening image, that she uses a similar approach but goes for full washes of color as the background, for slightly less dramatic contrast.

 

Have you ever been told to not wear plaid with polka dots at the same time? Well, you can if you play it right, pushing the contrast by adding even more pattern to your outfit so that is an obvious intentional choice. You’ll often find this approach in the work of Louise Fisher Cozzi. This necklace below has many different patterns. Some are very regular, while others are more organic. Most are rather busy but then there are those strings of solid pieces with nearly no pattern but for a slightly uneven glaze of color. Regardless of all these contrasting patterns, they have a connecting commonality in their circle form as well as being in a limited range of color saturation (pureness of color), giving what would otherwise be a cacophony of visual texture, a necessary cohesiveness. The result is a sophisticated kind of fun, sure to draw a bold, gregarious, and fun-loving buyer to this work.

 

Tactile texture can also be used as a contrasting mechanism in your design. An easy way to achieve contrast with texture is to have a smooth surface and a rough surface. It could be as simple as part of the work being highly polished and part of it sporting a matte finish. You can create textural contrast without going for the smooth versus rough by having two types of rough surfaces. That still contrasts if a bit more subtle.

The gorgeous Jenny Reeves earrings below, a metal, rather than polymer example (although there are plenty of folks who do similar texturing in polymer) has plenty of contrast although it does not jump out at you. The matte silver on the sides of each circle contrasts with the rough reticulated metal but not jarringly so. The matte finished silver moves to rough silver moves to rough gold so that there is only one level of change between each of those three treated sections of the circles. This somewhat gradual change diminishes the impact of the contrast resulting in a softer feel. Imagine how this would have looked if it went from matte silver to rough gold without the transitional section? It would have a very different feel.

As I mentioned, going for low contrast has its place and advantages. Dorota Kaszczyszyn doesn’t generally go for high contrast, but that is probably because she focuses primarily on her imagery and creating the forms and textures to bring her fantastical adornment to life, as is evident in her Water Dragon necklace here.

It’s not that contrast doesn’t exist in this piece – there is certainly contrast in texture, especially on the wings, going from a dimpled cap to a feathery brush below. However, all the surfaces have some kind of hand tooled texture, minimizing the contrast in that regard. The colors also have a minimal contrast, going from silver to a similarly shimmery brush of color using an interference green/purple powder, a color scheme echoed even in the focal shell on the dragon’s back. This low contrast gives the necklace, and her creature, a quiet grandeur, but it is not bereft of energy, instilled with a light but rippling liveliness through the texture and the flow of the shapes.

 

A Contrasting Evaluation

If, after seeing the ways you can work with contrast, you feel inclined to play with the way you use this design element, you can do so with some simple exercises.

Color is pretty easy to start with. Starting with a color combination you commonly use or tend towards, replace each color with the same hue but choose colors that are much darker, brighter, lighter, or subdued than the other colors. You will want the colors to have at least one characteristic in common (like they could all be very saturated or all be very light or they could all have a bit of black added to them) to keep the combination cohesive. You could also simply take out a bunch of blocks of clay and create several color pallets by shuffling them around – one high contrast, one meeting contrast in one low contrast. See which one you like the best.

If you want to better understand your options in color, grab Maggie Maggio and Lindly Haunani’s Color Inspiration book, or for a more condensed overview, grab your copy or get the Summer 2017 issue of The Polymer Arts which is all about Color! (We still have that 33% off 3 or more magazines sale going on and you don’t need a promo code for it now.)

You also can do a self-evaluation by grabbing a few of your favorite pieces, as well as a few pieces that weren’t successful, and looking at the difference in contrasts in the following areas:

  • Color
  • Texture
  • Shape/form
  • Size of forms or motifs
  • Pattern

See if you can identify where contrast worked well in the successful pieces and maybe where it could have been improved in the less successful ones by simply imagining increasing or decreasing contrast in each of the design elements listed above.

If you’re one of those who likes to make lists, copy these five design items out onto a piece of paper (or into an Excel sheet if you like those) and for each piece you have, identify whether the contrast is low, medium, or high for each design element. Then if you look at your evaluation list, you may find that you always have low contrasting color or high contrast in pattern, or vice versa or that, in general, you don’t work in high contrast or you never try low contrast. Whatever you’re not seeing a lot of, try to consciously create designs that push you out of your comfort zone.

Now, as I mentioned at the beginning, I don’t like to push high contrast in my work so it may seem funny for me to ask you to do something that goes against your norm, but I was only able to determine my preference because I did exercises like this. Push yourself like this can really help you discover a lot about yourself as an artist.

But if you’re more of the low-key, intuitive type, just keep contrast in mind next time you’re at the studio table. Like any design consideration, your work can be improved simply by being aware of whether you are making conscious decisions about design. If you are now more aware of contrast, you may find you’re able to more easily identify why a piece may not be working by checking the contrast and asking yourself whether low or high contrast or something in the middle would best serve what you’re trying to express or the type piece you are trying to create.

From Behind the Scenes

On that note, I am going to go work on the contrast that exists in my life between having a normal living situation and figuring out how to work and live in the beginnings of a halfway gutted house. But I always like a challenge!

I almost have my makeshift outdoor kitchen ready! Grill cleaned and ready for action. Check. Camp stove hooked up to grill size propane tank. Check. Camp table/sink with an actual running faucet via my garden hose set up. Check. Yep … no crazy construction is going to keep me from my creative cooking!

Now I just need to make covers/cozies for my instant pot and my non-polymer countertop oven so they can sit outside more or less protected from the elements. Then … I need to clear space in the studio for the refrigerator. I have always said that one’s studio or office should be as far away from the refrigerator as possible to discourage unintentional grazing so I’m seriously breaking my own rules here! Didn’t I just say I like a challenge? Maybe I should have clarified how much of a challenge I like. *sigh*

I’ll be juggling all this while I am in the midst of polishing up the next issue of The Polymer Studio but have thus far been able to stay more or less on schedule. Just don’t miss out on this next issue!

Issue number two of The Polymer Studio has a wonderful collection of projects for you as well as a tour of Christine Dumont’s studio (so exciting!), an interview with the uniquely creative Cynthia Tinapple, stencil explorations with Debbie Crothers and much more! We would love for you to join us in The Polymer Studio… Just subscribe to get your plethora of polymer fun and inspiration. Your subscription also supports this blog and all the polymer obsessed artists that have helped to create the beautiful content of our publications.

Thank you for your continued support! Enjoy the rest of your Sunday and have a creative and inspiring week!

 

 

 

Mixing and Mingling, New Cover, & 33% off Back issues

We have a bit of business to do first today but it’s exciting business! I wanted to share with you the next cover of The Polymer Studio, coming late April.

We are thrilled to include projects from Cynthia Tinapple, our featured and interviewed artist for this issue, as well as Christi Friesen, Kathy Koontz, Elena Mori, the Mitchell sisters, Deb Hart, and Wendy Moore. Also, tips, tricks, and other bits of wisdom from Debbie Crothers, Ginger Davis Allman, and little old me. And you won’t want to miss the tour of Christine Dumont’s studio, complete with a conversation about her space and process, which I think you’ll find very intriguing.

All this and more, just a month away! Support our projects, this blog, and the betterment of your own polymer journey, of course, or just because you’d like to look at all the pretty things tucked into those pages, by subscribing to The Polymer Studio here.

(Be sure to scroll down to the last section for the 33% off sale stuff.)

A Fine Mix-up

So, did you get a chance to look through the winning entries for the IPCA awards? Here’s the link again if you didn’t see them. The winning entries are just beautiful and maybe even a bit surprising. If you saw it, did you notice any trends or changes in trends and what was presented? I thought it was interesting that there were a lot of mixed-media pieces where polymer clay might have been the focus, but other materials played large roles in important design aspects and visual impact of the work.

One of the reasons I find this so interesting is that the idea of expanding into other materials seems to be a regular conversation myself and many other people are having. I couldn’t say exactly what that means but I do believe that polymer, with its unparalleled flexibility for combining with other materials, has kind of come of age where our exploration of what it can do is being placed on the back burner in order to focus on artistic expression. I look at these mixed-media pieces in the awards and other pieces I find during my research and general perusing online, and it seems that we are seeing more instances where polymer centric artists decide what they want to make and then determine the best materials for the work rather than push to see if polymer can be used for most, if not all, of the components of a piece. Or perhaps I am just hoping this is the case because I would love to see more folks focused on personal expression will rather than letting our obsessive, but understandable, infatuation with the material determine our creative parameters.

Of course, for most of us who work in polymer now, this colorful, durable, and chameleon material will remain our primary love and, regardless of other options, we will often still try to do as much as we can with polymer, if just to see if we can push it a little bit farther. But, opening oneself up to the possibilities of combining it with other materials in major ways will allow us, and even the viewer, to focus more on the design and expression and less on the material itself, which will let the artist’s expression, vision, creativity, and aesthetic really shine. I find this very exciting!

So, this week, let’s look at some of the mixed-media pieces where other materials play a primary role alongside polymer. This could be very helpful for you if you have felt like you’re in a rut or are too often hitting technical or design walls in your work. Trying out a different material may just be the thing to inject you with new enthusiasm and, possibly, send you down a new path with your artwork.

Mixed Directions

Let’s first look at some of the winners of the IPCA awards and in many ways that other materials have been mixed in.

This first piece is both a mixed-media and a mixed artist piece. Ellen Prophater or worked with Sherry Mozer, a glass artist, led to the use of the black glass piece with its shades of green within reflected in the mokume polymer it sits upon. It is set in a silver bezel and accented with Swarovski crystals. Both the mokume and the glass show off a subtle transparency, drawing the connection between the two along with the green cast colors. It’s a nice reminder that collaboration can also push us in new directions making new discoveries in our work and even ourselves and our friendships.

 

Donna Greenberg just killed it as the professional mixed-media category. This wall piece is called Wedgewood Wave but the word that keeps coming to mind for me is swoon. Not just because I feel like swooning, it’s just so gorgeous, but that’s also the word that comes to mind from that fabulous flow of energy through those waves, back into the pool of blue. Those waves are paper, but the application of color and shape are similar to the polymer pieces so the different materials feel cohesive. This is definitely one of those cases where another medium was the better choice. Trying to create those waves in polymer would’ve been just silly, even though it could be done. The paper gives a lighter feel to the overall piece as well as a light and easy flow to the visual movement. She also used Ultralight polymer alongside the Arches cold press paper, acrylic gouache paints, watercolor pencils, and Apoxie paste, each material fulfilling its purpose in a way that another material would not have been as successful with.

 

With the issue of the environment heavy in many of our minds, we are seeing a lot of exploration into found or recycled or upcycled items. Sarah Machtey offered up this steam punk pouch necklace with removable magnifying glass for the mixed media category of the awards with a bit of all of that. The front and back of this small pouch is from a soda can turned inside out – you can still see the printing of the soda can on the inside – but she embossed the can with decorative lines and used mica powder infused liquid polymer in the recesses to make them stand out. The band across the top is upcycled copper from a renovation project while the side leaves and earrings are polymer clay. Not sure if the magnifying glass was bought or found but it certainly could have been reused from something else.

The pouch is 7” (18 cm) in height from the top edge to the bottom of the magnifying glass, so it’s no small bit of tin on there. Of course, she could have used polymer to create the metal sections but it would’ve been a bulkier piece. The tin keeps the weight down as well as adding some structural strength that would only have been accomplished with a much thicker wall of polymer.

 

Keep in mind, when we are talking mixed-media it doesn’t necessarily have to be another art material. For instance, I combined poetry with photos of polymer in a challenge last year that I was posting on my personal Instagram page. Other people mix it up by installing the work in unusual places so that the what is placed on becomes part of the artwork such as fairy doors installed on walls or in tree trunks or tiles installed into a kitchen backsplash. Rachel Gourley takes it just a touch further, installing her little collections so that they recede into the landscape. She scatters her polymer elements out and about in natural settings, looking much like organic growths but unexpected in their color, shape, and placement.

 

Putting Together Your Own Mixer

This week, I didn’t pull any tutorials for you to try because it would have to be a mad, a long list of other materials to give you any real idea of your options. Instead, I might suggest that you keep your eye open for what other polymer artists are doing with other materials. Perhaps one of the above ideas piqued your interest already. If so, research that other material and find ways to acquire or hone your skill in that medium. Just put “polymer clay and [fill in the blank with the material you’re curious about]” into the search bar on Pinterest, Instagram, Flickr, or Google images and see what pops up. Add the word “tutorial” to see what offerings there are online. I’m sure there will be plenty of inspiration.

You can also grab your Spring 2015 – Diversity issue of The Polymer Arts or the Convergence themed issue from Spring of 2016, both of which have a ton of ideas around using other materials with polymer. You can see the table of contents for all back issues of The Polymer Arts on this page to check out what these issues have to offer. Then, if you don’t have the issues, you can order them on the website.

In fact, let’s have a sale!

Why don’t you grab a few back issues and take a full 33% off 3 or more! Good on digital or print, I’ll keep this up until next Sunday so grab them this week. Use promo code TPA33 at checkout.

And … I’m Off!

I would normally have some community news and deals for you to look into at this point, but I did not get to that. This week has been a struggle. I am being kept busy by a house that has decided to just fall apart all of a sudden. My creative energies have been used up relocating kitchen activities to the garage, the porch, and even my studio because of plumbing issues while getting tons of exercise running large circles around the house because the garage door won’t open, washing my clothes in the bathroom sink because the laundry machine won’t drain, and constantly shuffling ice packs from freezer to fridge because the fridge is on and off and its replacement is weeks away from getting here. All this happening two weeks before we start some (apparently!) much-needed kitchen remodeling. I’m not making this up.  But talk about mixing it up!

So, I’m going to get back to my at-home glamping while trying to get the next issue wrapped up for you. But tune in next week for more polymer pretties and inspiration, and, hopefully, less house drama from Sage’s corner! In the meantime, if you work with another medium, please share it below. Or tell us the most unusual medium you’ve combined with polymer! I’d love to get a feel for what you all are working on besides polymer. Leave links to the work as well if available! (If you get this by email, click on the post title to get to the post page and scroll down to comments.) I’m excited to see what you all have to share!

All It’s Cracked Up To Be

March 17, 2019

What is it about weathered and worn surfaces that so many people find attractive these days? Mind you, I am very much one of them. I have a whole line of work called “Beautiful Decay” that explores the beauty I find in the deterioration of durable materials. But the one related effect that seems to be everywhere these days is crackling. Who doesn’t love a good crackle! From shabby chic furniture to crazed ceramics to crackle glass decor, the look of a deteriorating surface seems to have wide-ranging appeal.

Knowing that, it’s not really a surprise that crackle is so popular as a polymer technique. A great many of us are already texture fiends and, if you love texture then you are going to try crackle- so there’s one of the reasons for its popularity in polymer. But we also know that there is a market for work with crackled surfaces since it pops up in so many areas related to decoration and adornment, making it a safe bet if you sell your work.

There is no one right or best way to create a crackled surface in polymer. You may not have realized it, but there are literally dozens of ways to create crackle. It can be created with a crackle paint medium, partially cured layers of polymer (like I show you in my Controlled Crackle technique which you can find in your Fall 2011 edition of The Polymer Arts), dried paint (or glaze or gilders’ paste or floor wax) on raw clay, metal leaf on raw clay, leaching, alcohol treatments, or by creating a faux texture with impressed materials. And I know I am still missing a few in that list!

So, let’s enjoy some crackle work today and wrap up with a few tutorials on different crackle techniques that you can try out.

 

Let’s Get Cracking

One of my personal favorite “cracklers” is Staci Louise Smith. She uses a number of different techniques to achieve a wide range of cracked texture. In the necklace below, her crackle is not subtle. It is not evenly spread across her beads either but rather, it is rough and tumble and scattered in energetic horizontal lines. Her soft coloring calms the chaos of the crackle which is also balanced out by the many other purposeful accents and lines from the wire.

Staci can also do subtle as evidenced by the opening piece, a Balance Bowl from her tutorial in the Polymer Art Projects – Organic book. (You can get the book on our website if you want to make one of these stunning bowls.)

Check out this blog post where she shares how she makes the necklace here along with sketches and her thoughts on the process.

 

A subtle crackle can often take a bit more patience but what a lovely effect it can have. It may not even be obvious at first that the beads on this necklace below by Ursa Polak have a crackle surface, but the weathered feel comes across immediately. Take a close look to see all the fine-lined cracks that add to the depth and variation of the surface.

 

Kroma Crackle is a lovely gel medium that itself dries and cracks without having to stretch the clay and yet remains flexible so that you can manipulate the clay without the cracked material popping off. Once you worked with it for a bit you can control the size of the crackle pretty well. You can add small amounts of acrylic paint or mica powders to give yourself a wide variety of color options. You can also apply paints, inks, dyes and other colorants on it after its dry.

These earrings are by Els van Haasen uses Kroma Crackle on polymer. You can see how regular a crackle you can get with this medium. But it can definitely be quite varied once you come to understand how to use it.

 

You almost forget that the technique that was most commonly used by the highly esteemed Elise Winters, who we lost just this year, was also a crackle technique. Her work was very controlled, as was crackle but that was probably the most recognizable part about her signature style. I can only imagine the work she put into gaining such control over her crackle, but it just shows what can be done when we invest a bit of patience into our work. (I erroneously put in that this was metal leaf when I first posted but, no, it’s paint, which also takes such skilled control, having to ensure that the paint is evenly applied to get such fine crackle.)

 

This is actually a piece of mine from some years back. It includes alcohol treated raw clay, controlled cracking of partially cured clay, and metal leaf colored with alcohol ink. The alcohol treatment is a way of drying out the surface of raw clay to get a very fine crazing. It’s a bit of a tricky technique but it sure worked here. That helped create the uneven surface of the partially cured polymer under the metal leaf, giving it a burning ember look.

 

Let’s Crack You Up

Ready to try some various cracking techniques? Here are a few freebies to get you going:

If you want to try the straightforward Paint Crackle Techniques:

  • Grab a craft acrylic (the cheap acrylics work better than artist tube acrylics which tend to stretch rather than crack) or tempera paint and a well-conditioned sheet of polymer rolled on the thickest setting of your pasta machine.
  • Brush a moderate (not heavy) layer of the paint onto the polymer. Wait for it to completely dry.
  • Then roll it through the pasta machine set at two settings down from the thickness you created the sheet on. You can stop here or, for wider, more varied crackle, turn the sheet 90°, adjust the pasta machine down another one or two settings and run it through again.
  • You should have a nice crackle now but if your paint is stretching rather than cracking, rolling another sheet of polymer and lay the crackle sheet on top and then start rolling it through the pasta machine again. Eventually, the paint will crack but sometimes you need a really thick layer of polymer to start in order to stretch it far enough. Tempera paint won’t stretch and cracks very nicely if you have that on hand or fancy a run to your local craft store. You could also get some crackle medium while you’re out and follow the instructions to crackle paint directly on your raw polymer clay.

You can find some examples of the use of different paints on this post by Jan Geisen.

For more tutorials online:

  • One of the things I didn’t show you in the samples above was how to use impression material to create a faux crackle effect. I use crumpled aluminum foil for this and then use the antiquing approach of rubbing acrylic paint into the cracks after its cured and wiping it off. But Katie Oskin has an interesting material to share in this online tutorial, as well as showing the effect of painting it before she impresses it.
  • In this video tutorial, Sandy Huntress shows you how to crackle very thin sheets of partially cured polymer clay.
  • Crackling can be done on round surfaces too! Here’s an online tutorial using metal leaf on bicone beads to create crackle. Keep in mind you could do the same thing by painting the beads and then rolling them around to get it crack.

Do you know of other great crackle tutorials or want to point out another crackling technique I didn’t mention? Drop a comment below (if you’re on this post’s page online) or click on the title of this post to go to the post’s page and share the info with us all. It would be much appreciated!

 

Bits of News

 

Okay… Off with me. Working on the next issue of The Polymer Studio. Get your subscription or catch up if you didn’t get the first issue by just jumping over to the website now.

Know that your purchases and subscriptions help me pay the bills so I can justify the time I put into sharing all the good stuff on this blog. Help me help you as we collectively feed our addiction to polymer!

Have a wonderful and creative week! –Sage

 

Hole-y Design

Here is a relatively odd question but give me a moment and I will explain… Do you think of a hole as an empty space or an object unto itself? Or do you just find the idea of a hole being a thing of its own strange? I mean, it’s empty space, isn’t it? Well, it is empty space but when it comes to design a hole can be a focal point, added as accents or used to create patterns, so it is a thing of its own – it’s a design element.

I myself love having holes in things. Holes can lighten up the visual as well as the physical weight of a piece. They also leave space for seeing through to what is behind it which can be symbolic or help integrate the piece into its surroundings. This can be especially useful when it comes to jewelry as you can see the skin, hair, or clothing of the wearer through those holes and so the wearer becomes more inclusively part of the design and what the viewer is observing.

Let’s look at some examples of how holes are used as integral parts of design in jewelry.

 

Hole-y Jewelry

First of all, holes will always be, on some level, a focal point. It will draw our eye almost immediately, both because we note the missing material and also because we have an inclination to peek through wherever a hole has been made. Holes are a narrowed point of empty space and we can’t help but look through to whatever it might be framing.

Here, Eva Haskova uses rolled up strips of clay to create holes that become strong focal points in the pendant and brooch shown at the start of this post. They are balanced by the tall, dimensional elements breaking out of the frame of the background which calls attention to them, and yet the eye continues to go back to the holes, doesn’t it?

Eva seems quite enamored of holes and negative space in her work. Just take a look at her Flickr photostream or her Facebook page to find more examples and inspiration of how she uses holes.

Even though our eyes will tend to focus on holes, they can be balanced out fairly equally. This necklace by Cecilia Button is a great example. She uses a lot of pattern and movement throughout the necklace to create a balance between her various design elements so that the holes don’t overly dominate.

 

Holes can also be functional while being integral to the design as seen here in Janet Pitcher’s lariat style “Petal Pusher” necklace. This is also an example of how holes can be constructed – by an arrangement of canes slices here – not just punched through the clay. Janet has been making these for years in a myriad of colors and arrangements. You can see more of them on her website and her Facebook page here.

 

Holes are also excellent for creating texture and pattern. When the holes are many and placed close together they visually mesh as they do in this pendant by Еnkhtsetseg Tserenbadam, who first created the pendant based on instructions in Helen Breil’s book, Shapes: 25 Inspirational Jewellery Designs in Polymer Clay. Her random pattern of holes become a texture surrounding an elongated hole formed by the folded clay. So, it is holes around a hole, making for a particularly open and airy pendant.

 

Here is an example of using holes for nearly all of the above purposes. One hole is a focal point, another is the functional connection point for the cording while the many others – some complete holes and some not quite all the way through but acting the same visually – are placed over the pendant as accents but ones that create a pattern that adds energy through their rhythmic placement. The accent type holes are also end points for the strong energy of the lines radiating from the center, giving that energy anchor points to contain it. The artist, Sandra Plavšić , also includes layers of color that show themselves in the sides of the holes, taking full advantage of this type of revealing element.

Punching Your Own Holes

Are you feeling the itch to put some of your own holes into clay? It wouldn’t be hard to get started on a little hole-centric project today. You really could just roll out some clay and pull out some round cutters and start playing.

  • Just punch holes randomly around a thick sheet of clay – it could be a sheet that you’ve treated with some technique or maybe marbled or otherwise mixed the clay.) Then, using a large cutter as a frame, place the large cutter at different points in your sheet to find a pattern of holes you like, and just punch it out. You can further color or treat it however you like and/or place it on a form to give it dimension. You could also take a cutter that is larger than the other small holes you punched into the sheet and make a large focal point hole in the chosen section.
  • If you don’t like the sharp cuts of a cutter, soften them by laying a sheet of plastic wrap across the top of the clay – make sure it is smooth with no wrinkles to start – then punch them out and it will add a bevel to the edges of the holes.
  • For a more organic look, hand tool it. Press a ball stylus, knitting needle or other round tipped hand tool straight down into the clay and then move it around in a circular motion until you have created a hole. Do this over and over again, randomly and close together to create a texture, or place them purposefully in a pattern or judiciously as focal points.
  • If you prefer a bit of direction as you start your hole-y crusade, here is a fun and easy tutorial that creates a simple but energetic and contemporary looking jewelry piece:
  • Or you may want to grab your copy (or buy a copy) of the Polymer Art Projects – Organic book, in which holes play a role in several of the pieces in the book including a similarly styled pendant and brooch by Eva Haskova to what I showed you above but with her lovely take on a brain cane.
  • We also have a beautiful and easy to make boho-esque pendant project, created in the more organic hole making style, in the first issue of The Polymer Studio that the artist, Anna Malnaya calls “Martian Footprints”. So if you have that issue and haven’t tried it, go grab your copy and try that out. If you don’t have a copy, get it on the website – the digital edition is available for immediate download in most countries or order the print edition and we will ship it off to you.

 

Need Supplies or Inspiration?

Poly Clay Play is having a Spring Fling Sale! Get 10% off your whole cart (some exceptions apply.) Use coupon code Spring Fling, March 9 – 16, 2019. Shipping is closed at the shop that week (hence the sale) but you can take advantage of the discounts now and your goodies will be off to you the following week.

Discount pricing is available now on Christi Friesen’s new Nudge Cards. Get $4 off the set on her website here. No promo code needed!

On our Tenth Muse Arts site, discount packages for books and backorder magazines are available now. Buy One Get One Half off on Print + digital packages of the beautiful new Polymer Journeys 2019 book, or on packages including BOTH editions of Polymer Journeys – 2016 + 2019. There is also a package with all available copies of The Polymer Arts for basically half off the cover. See the website here.

 

Persistence of Ideas (And 50% OFF+ Damage Sale!)

June 20, 2021
Posted in ,

First, my apologies for being absent the last few weekends. I kept thinking I’d be able to post something, but my days have been exhausting.

The roller coaster of the last month, not to mention the last year and a half, has really brought into perspective the concept of self-care. Balancing responsibilities with care for yourself as well as for others can be a tricky thing but, it’s not unlike art—if the composition can’t achieve some sort of balance, not much else is going to work.

So, I’ve been hashing out some ideas that will allow me to keep chatting with you as well as do what I need to do for my family and with my creative projects. I am hoping that will all be settled this coming week and we can have a little chat about that next weekend.

 

Persistent Ideas

In the meantime, let me share a thought by a fellow polymer artist, Adam Thomas Rees. He posted this intriguing piece, seen above, on Facebook last month, saying:

This was my first hybrid sculpture mixing metal and clay. I’d had this idea floating around in my head for about 10 years before I finally went for it. If you have an idea you’ve been sitting on, it might be time to go for it!

I have to agree. The first of the two novels I’m working on was also started a decade ago, maybe more. It can take some time to get around to it but, if an idea sticks with you, I think it’s a sign that you should really try it out!

What have you always thought about doing but haven’t tried yet? It can be very invigorating to take on something brand new and challenging.

Annual Damage Sale!

Grab Imperfect Publications for as little as $3.98 or Perfects & Supplies for 30% off

So, it’s that time! I’m cleaning out the mailing room and collecting all the publications with a dinged corner or a little shelf wear and am putting all these perfectly readable publications up for purchase at 50%-60% OFF the list price.

  • Print Magazines: 3.98 each
  • Print books: $5-$12 each.

Half of the imperfect issues will sell out day one if tradition holds so don’t wait!
This only happens once every year or so and once they are sold, the great deals are — whoosh –outta here!

Go here to grab up these steals before they’re gone.

Need Something Else?

Get new PRINT items and design tools for 30% off! So, if you can’t round out your collection of TMA publications with an imperfect copy, you can do so with an amazing deal on a shiny new one!

PROMO CODE FOR 30% OFF : damsale21

Promo code works for any PRINT publications or Design Tools NOT already on sale on the whole of the website. 

 

30% off sale end June 30, 2021. Not good with other discounts, coupons, or on shipping. Damage sale ends when stock is gone, which can be pretty darn quick so don’t wait!

Read More

A Second Collective Look

April 25, 2021
Posted in ,

This week, I need to beg your forgiveness as I am recycling a post from a couple years ago. There’s been a small avalanche of family emergencies — nothing life-threatening — and I need to head out to Colorado and Kansas for a couple of weeks. I’ve been unable to put something together for the blog with all the distractions, but I’ve been thinking about this idea of collections again. It seems a lot of us were doing it a bit of exploring last year, which tends to result in lots of unused bits and pieces. So, this might be a useful reminder of things you can do with those bits and bobs.

Do you have a bin or box of pieces and parts of your handiwork yet unfinished but which you are too in love with toss? If you regularly create, I can’t imagine that you don’t. But what exactly do we do with these pieces? Do we hold on to them, hoping that they will be just the thing needed someday or do we toss them?

It can be quite the dilemma, one that even Marie Kondo can’t easily help with because, hey, these do spark joy for us! We see value in them, in that they represent our creativity and what we can accomplish. But do such little jewels of our work belong in a bin where we don’t get to admire them?

I’ve been thinking about this question for a while and came up with a few solutions of my own. If you have a copy of Polymer Journeys 2019, you can see, in the very last entry, my contribution, which is a display case of small exploratory items for which I had no particular use in mind when created them. I created them without thinking, “This is going to be a pendant,” or “This is going to be a set of earrings,” or “This is going to decorate a vessel.” I just made them to see what the material would do, most of which I liked, and they all represented a little exploratory learning experience.

I had already been tying bits onto ribbons and hanging them off the edge of my studio corkboard as little festive decorations. That doesn’t work for pieces that only had one viewing angle though as they would twist around on the ribbons, so I was still in search of other options.

Then I was out talking to the butterflies in my backyard (Yeah, I talk to the creatures in my yard,) and remembering how I used to catch and collect them in shadow boxes as a kid. It just randomly struck me that my little creative bits were like butterflies. They are lovelies I caught in a moment of exploratory creativity and in that small frame of time, they became a kind of unexpected friend, going through that creative time with me. I didn’t want to toss my little friends, even though I had no end-use for them. You don’t do that to friends! You hold on to them and support each other, right?

Does that sound silly? Maybe it is, but it was revealing to me to realize that I kept certain pieces not because they were so beautiful or well done, but because I felt connected to them. So, why not collect them and put them out like a collection of butterflies or a collage of photos? What you see here is what I started making. My husband and I would find shadow boxes at garage sales and thrift stores for cheap, and I’d arrange my bits in them like compositional jigsaw puzzles. I’ve made half a dozen of these so far.

By the way, I use a hot melt glue gun to tack the pieces onto a bit of mat board cut to fit the box. The nice thing about the hot melt glue is that if you do every want to take a piece out of the collection, you warm the back of the mat board with heat gun or hair dryer for a couple seconds and pop them right off. So, your “friends” can come out and play in another piece or a new collection if you like!

As I shared in the previous version of this blog in 2019, people have also used old collectibles display boxes to show off small sculptural pieces or heavy pieces of fabric to pin or hook jewelry pieces as a means of display as well. Look around at how you are other people put together collectibles for ideas about how you might display your polymer bits.

So, do I have your little wheels turning? These should give you ideas not just for what to do with your extra bits, but many of these could be a jumping-off point for creating your own unique show displays and photo setups.

Do you have a cool and unique way to display your extra bits or jewelry? Send me links to images if you do. Put it in the comments below, or if you’re reading this by email, click the header for this post to get to it online to leave a comment.

 

 

You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…

 

Read More

Hard Won Joy

April 18, 2021
Posted in ,

Libby Mills’ Mod Flowers are her latest challenges. Take a look at her Instagram page and all that she’s been doing over the last couple of years, including process and studio pics.

How adverse are you to hard work and challenges?

Recognizing your ability to face the challenges and incredible effort that goes into creating original artwork can be a necessary, if somewhat painful, bit of self-assessment. Most of us find ourselves on one or the other extremes—either we give up too soon, not doing the work or finding shortcuts that don’t help us grow, or we don’t give up even when the process becomes pointless or detrimental.

Are you one or the other, or are you somewhere in the middle? Or does it depend on the type of work or challenge?

The Easy Way

Trying to find an easy way around hard work and difficult challenges is probably a bit more common. If we’re all being honest, there’s few of us who have never used a tutorial or ideas from artwork we’ve seen to develop our own pieces. That’s okay. I’m not saying that it’s bad or wrong—taking inspiration from other people’s design is one way we learn. However, if you don’t get past that stage, you are missing out on some of the most joyful work you’ll ever experience.

Using other people’s instructions or ideas allows you to create something without putting your creative self or your ego at too much risk. However, it’s taking chances and doing the hard work that makes the successes so exceptionally sweet. By going out on a limb and creating purely from your own inspiration can result in one of the most joyful feelings I think a human being can have. Seriously. There is nothing like hard earned success in your creative work to put you on Cloud 9.

Now why do we feel that way about our own artwork? Well, for one, the work is born of our ideas, experiences, and loves. But more so, it’s because of the struggles we went through either to learn the skills that allowed us to make the art and/or the hard work and time we put into its creation. When it’s done, your talent, your spirit, and your perseverance become a concrete thing that you can revel in and share.

In one of my writer’s group, a friend of mine asked why every story has to have conflict. The answer is that story IS conflict. Can you imagine watching a movie where the hero of the story had everything happen just the way they wanted it to? If Harry Potter just flicked his wand and make Voldemort go away, or Hamlet didn’t care that his father was killed, why would we watch those shows? Do you gossip about the good things that happen to people or the difficulties people are having?

Now, think about how satisfying it is when Harry vanquishes his nemesis and Hamlet finally avenges his father. Those moments are so immensely satisfying to us because of what we went through with the characters to get there. And that is true of anything we want to attain as well. The more conflict and struggle we face, the more satisfying it is when we accomplish or gain what we are after.

There’s actually science behind this. Researchers have studied everything from job positions to winning the lottery and they have found that when people are simply given something without having to work for it, not only does any elation from the acquisition die quickly but people are far less fulfilled and, sometimes, even become depressed. However, when people struggle to get promoted or have wealth because of years of hard work, they are not only happier, but they are also more motivated to keep at it than those that were simply given those things.

So, when you’re in the studio, don’t be frustrated or shy away from challenges. When you find them, think, “This is my chance to achieve something wonderful and fulfilling.” If you presently lean on the ideas of others, challenge yourself to create from your own designs as much as possible if not completely. Take risks. Push yourself just past the point of being comfortable. Do the hard work and see if you don’t find it more than worthwhile.

 

The Other End of the Spectrum

Now, if you’re one of those that doesn’t give up when you should, or you don’t give yourself the time off when you should, learn to take more breaks both physically and from the work you’re struggling with. It often helps to put a difficult piece away for a little while. Pull it out a few days or a few weeks later and you can see whether it is still worth working on. If it is, you’ll probably see a solution you didn’t see before.

Just don’t be afraid to set aside a piece that is going nowhere. Don’t feel you have to try finishing something because you put a lot of time into it. None of your time spent is wasted. Everything you do helps you learn and hone your skills.

Me, I’m of this sort. A dog with a bone, as they say. I look at every challenge as a battle to be won, and I don’t know the meaning of surrender. It’s rather ridiculous sometimes. I also don’t stop working when I should either, which is why I keep hurting myself.

 

Scaling Back on the Blog for a Bit

For those of you that were not with me for the Great Elbow Drama of 2019, I developed an advanced form of tendinitis in my right arm and can no longer type with it for any length of time. Well, now I have an overused left arm after too much research for my novel and too much gardening. *Sigh*

So, this post, and probably the next few, will be primarily chatting rather than deep dives into design concepts as I’m limited to using my speech to text software while my arm (hopefully) heals. Searching for a selection of great art images to go with what I’m writing about requires too much mousing I’m afraid. I hope you’ll stick with me though. I’ll aim for a mix of “Life As an Artist” articles like this one and design refresh posts that need only one image for the time being.

In the meantime, for those of you who can, get to the studio, give yourselves some reasonable challenges, and enjoy the fruits of your labors.

 

 

You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…

 

Read More

Compositional Bones

November 8, 2020
Posted in , ,

This glass vase by Robert Coby is broken up into a rough but simple composition of thirds.

Composition is really an intriguing design aspect. It is how everything comes together because it is the structure of it. It’s the bones upon which all your elements and principles are placed. It’s a functional concept and an all-encompassing one.

The structure of our compositions use a number of anchoring concepts, all rooted in design principles. We could learn the principles first but since they are less concrete than the elements you have been learning, I think an overview of the possible compositional structures will allow you to immediately see how the principles of design we’ll get into later can play out in a composition. But in order to talk composition I need to at least touch upon a few of the principles.

Last week, I started your compositional knowledge with a brief discussion of focal points. As we dig into new compositional concepts this week, remember that focal points will be either an element we are strongly drawn to, will have tremendous contrast, will be a place where elements converge, a place where an element is isolated, or will simply strike us as unusual. In other words, they stand out more than anything else when taking in the whole piece.

So, that was a first introduction to that principle. Here are a couple more.

 

Hierarchy

In your piece there will be elements that stand out more than others and ones that are barely noticed. The one that stands out the most, as you are sure to surmise, should be your focal point or points but after those, all the other pieces will likely be vying for attention in a visual hierarchy. That order creates a perceived perception of each element’s importance.

Rebecca Thickbroom’s necklace elements almost always take up separate spaces with little or no overlapping. It makes them feel presented, like they are part of a story. She is also fond of including negative space beween parts in her designs which, with jewelry, make the body or clothes of the wearer part of the overall landscape of the piece. There is also a definite hierarchy of elements. Where does your eye goes first? Where does it go after that? And after that? Do you see how this hierarchy moves your view around the piece so it feels full and cohesive?

You can determine what elements are more important than others by giving them more space, making them bigger, having them high contrast, setting them where line or shapes converge, giving them a lot of energy through color, marks, lines, etc.

Hierarchy, knowing which items are most important, is needed for most standard compositional arrangements as their placement can be successfully arranged based on them.

 

Space

When we talk about space, we talk about positive and negative space. Positive space is usually the action, the focal point, or an area of primary interest. The negative space is usually a background or an area where the viewer can rest from analyzing the more active areas. It’s also all the empty space around sculptural object.

Yes, these principles can get kind of complex that’s why I’m going to take these things one at a time after you get this overview.

 

Easy Peasy Composition- The Rule of Thirds

The Rule of Thirds provides an easy but very pleasing way to lay out your elements. It is also pretty dynamic while easily remaining balanced. Let me explain.

Imagine a tic-tac-toe grid laid over the primary view of your work, like it is in the opening image of this post. If you look at your work in terms of this 9 box grid, you end up with several choice positions for focal points and breaking up the space.

For instance, the points near where the horizontal and vertical lines intersect are great places to set a focal point as well as secondary focal points.

The grid can also be used to break up the space. If you want two background textures, instead of just splitting the “canvas” of your piece in half, you can put the stronger texture on just one third, covering 3 squares of your grid. The second texture would have more space but if not as visual strong as the other, that extra space would balance against the visual draw of the stronger texture. Again, that gives you balance.

 

Classic Composition – The Golden Ratio

Like the Rule of Thirds, the Golden Ratio is a kind of grid but this time, it is based on the ratio of the body and other natural occurrences—it’s a matter of proportions.

A Golden Ratio grid for composition is made up of Fibonacci squares which are a visual representation of a mathematical sequence of the same name. If you skip the math, you can just create the grid starting with any sized square then start adding squares that are as wide as the widest side of the shape you have at that step. The first time, it’s just the same size square but after that, it keeps doubling in width.

The Fibonacci sequence and this Golden Ratio are the basis of the natural world’s primary compositional method. The most often referenced example is the nautilus shell. The interior pattern is a Golden Spiral. Its shape will curve from corner to corner in every square in the GR grid. That’s because the widening of its spiral is based on the Fibonacci sequence. Cool, right?

My Ice plant brooch fits nicely in a Golden Ratio grid. I didn’t do this consciously but having studied the Golden Ratio quite a bit, it is very intuitive for me. It won’t take long for it to be intuitive for you either once you’ve worked with it a bit and start to recognize and feel the graceful balance of its compositions.

You can find these proportions (approximately 1.68 to 1) everywhere—in the proportion of your limbs (your upper arm to the rest of your arm, your whole arm to your body, etc.), the arrangement of flower petals, the way tree branches grow and split, even in the double helix of DNA. In other words, it’s everywhere and so we find order and comfort in it, even if we don’t recognize it consciously.

In art, focal points that land on that first tiny square turns out to be one of the most pleasing compositions to the eye. The grid can be oriented in any direction, flipped upside down or whatever. If the focal point lands there, you are pretty, well, golden!

 

Keep in mind that these compositional grids and standards I’m introducing are not used precisely. They are loose guides.

 

 

So, now you have two orderly, well balanced compositional arrangements you can use as go-to ideas for composition. These work best on groupings of elements like you might have on a brooch or pendant, single contained elements that will be part of something larger like the focal bead/element of a necklace, the primary view of decorative objects, and, of course, for wall art. They are also fantastic compositional arrangements for those photos you need of your art!

Try these out next time you are laying out a design, sketching, or snapping pics of your pieces. Scroll down for apps and gadgets to help you find these compositions in your designs.

 

Changing the Composition of Our World

I was so going to just let this post slide without any commentary on the news here in the US but I just want to add whatever unifying voice I can out there but I ended up writing a whole article about it! Since this is so not about art, I am not posting this here, but if you are at all interested in our understanding each other, perhaps my words here can be a helpful start or an additional push.  Go to my Facebook page here.

In other news, I do have Grayscale Value Finders back in stock for those of you who missed out on them last time. If you pop over to the Design Tool Supplies page, you might find another gadget, a compositional tool/ViewCatcher, available if it hasn’t sold out to the Art Boxer Club members yet.

Keep in mind that Art Boxer Members get a much more in depth article, exercises, and other articles on living an artistic life in the weekly mini-mag so if you like these posts, support this blog and your artistic endeavors by joining up here.

Read More

Beating Burnout

October 18, 2020
Posted in ,

Corvid sculpture from the rich imagination of Ellen Jewett. I don’t know where she draws her creative energy from, but I’d take a sip or two if she bottled it!

Do you ever get artists block? I’m not talking about times of procrastination or being afraid to start something but literally not been able think of anything to do. Does your brain ever just feel empty?

Well, this weekend, mine was, which was weird. I’m not usually at a loss for words, especially when it comes to blogging or writing articles. I usually feel like I can write about art and design nonstop and never run out of ideas. But, this weekend, I hit a bit of a wall.

What is that all about? Honestly, I think it’s about burnout and not just from my usual mad pace. I think many of us are running into burnout this year.

Burnout and blocks are often related in their causes. We all have an infinite number of ideas inside our heads all growing from our countless experiences, ever-growing knowledge, and ever present desires. So, I believe that it’s not that we don’t have ideas sometimes but rather that we are missing the keys to access them.

Without Resources

Although so many of us supposedly have all this extra time and flexibility this wacky year, we don’t always have the energy needed to navigate the constant changes, the stress, the worry, and, probably more than anything, the uncertainty while still juggling our family, jobs, and creative aspirations. Some days it’s just too much. Our well of energy goes dry.

I’m hearing this from a lot of artists. Some are wondering if they are burned out on their medium or their studio space or their creative time in general. Others are lacking motivation because there aren’t shows and fairs to give them those all-important deadlines. Still others, having lost major avenues of income with both in-person teaching and live shows on hiatus, are questioning the fragility of their chosen path.

What it comes down to is that the usual motivations that push us to create are missing. We don’t even have social engagements for which to create new pieces of jewelry for ourselves to wear or guild meetings to encourage us to complete work so we have something new to share. Many of our usual energizing motivators just simply aren’t there.

Signs of the Times

It has been noted throughout history that when there are traumatic and life-threatening circumstances within a society, such as war, famine, or major natural disasters, the people first focus on survival, initially neglecting most other pursuits. However, one of the very the first things that come back into society, once people begin to feel safe and secure, are creative pursuits. Perhaps we don’t all feel quite safe and secure yet, not feeling settled enough to bury ourselves and creative work but as the world starts to right itself, the creative urge will return. Take heart from that.

The other things very particular to this pandemic that may be making it hard to create are that we aren’t having as many novel experiences and are certainly deprived of a normal level of social stimulation. Both these things provide us with inspiration and energy to be creatively productive but they are rare commodities right now.

In other words, while the world and all the bad news is slowly but surely draining us of our day-to-day energy, our sources for renewed energy are spare to nonexistent. It’s really no wonder that so many people are feeling uninspired or burned out right now.

Filling Your Well

So, the first thing I want to say, to myself as well as you, is that it’s okay. Burnout is normal. Our creative path, and life in general, is not a smooth and even highway but more of a roller coaster. This will happen sometimes, especially in times like now.

The other thing I’d say is, rather than worry about any lack of productivity or trying to force it, do what you can to recharge your creative battery. Get out and go places and do things that you don’t normally do. Obviously, stay safe and follow all recommendations in your area, but go take a hike in a nearby forest or walk through an unfamiliar part of town or go photo hunting (a kind of self-structured scavenger hunt but you are gathering photos rather than things). Just come up with things that you can do safely but that are brand-new and interesting to you.

Getting out and doing new things will create new pathways in your brain which will, in turn, energize it and keep your mind fit and flexible. As you get older, new and novel experiences become more and more important so never lose your adventurous spirit. Those same mechanisms that help keep your brain young also keep your creativity flowing, as shown by a number of recent studies. In fact, at least one study suggests that creative thinking is boosted most after weird or even traumatic experiences. If that’s true, we should all be insanely creative when this period in world history is over! There’s another reason to take heart I suppose.

Besides novel experiences, also be sure you are getting some kind of social time in. Sure, it might have to be a zoom call but, if it can be done safely, a socially distanced backyard or front yard gathering (while we still have some weather we can sit outside in) with a handful of creative friends or family can do so much to boost your spirits and energy level.

I myself am going to heed my own advice. Next weekend we are going to take out the camper van conversion I’ve been working on and do a little van camping. That’s the other thing. Sometimes burnout or creative blocks just simply need space and time. We can try to barrel through it – and I often do just that – but sometimes we really just need to kick back and relax and let the mind “marinate” on life and our present experiences. Combine some downtime with some new experiences and, if you can swing it, some socially distanced social time, and you are sure to come back with renewed energy and inspiration.

Read More

Why Size Matters

October 11, 2020
Posted in , ,

Fanni Sandor creates exquisitely small and biologically accurate creatures in polymer clay and mixed mediums. Her choice to go small is born of a fascination with minature art and we, likewise, are fascinated by the tiny masterpieces. See more on her Instagram page.

What size art do you work in? Have you even ever thought about that? Do you work small, big, or a nice moderate middle size?

I think many of us have a limited size range that we feel comfortable working in and rarely, if ever, venture outside that range. There’s nothing wrong with that but it does beg the question, do you think about what the appropriate size is when you create something?

As you might be guessing, if you’ve been reading my blog or design articles for any length of time, I’m about to point out that making the decision about the size of your work can help to fulfill your intention.

(Do you ever think, “If she says something about intention one more time…!” Well, I do hope it’s not annoying. It’s just that important!)

Size in art simply refers to how big or small something is. It is used in a variety of ways to emphasize, organize, assist in functionality, and symbolize the intention of the artist. A lot of the size choices made have to do with relativity – something can only be called small if something else is big and vice versa.

In design, this is actually a principal known as proportion and scale. Proportion is about the relative size between two or more objects or elements when they are grouped together or juxtaposed. Scale refers to how big or small something is compared to the general understanding of how a thing usually is or should be. For instance, we expect a chair to be sized for human beings to sit in and a teapot big enough to hold several cups of tea. Anything significantly larger or smaller than these expectations would be a change in scale.

Scale represents an interesting concept in that it makes note that we do have expectations about how big or small thing should be. That may sound like we have some kind of undue constraints placed upon those of us who create, but actually, scale gives us an opportunity to step outside those expectations and make a point.

As mentioned above, size can be used emphasize things. Making something bigger than expected usually draws attention, so if you created a beaded necklace with beads as big as golf balls, those are definitely beads that are bigger than normally expected.

The same concept of emphasis works with proportions. Let’s say that you only made one of those beads as big as a golf ball in the previously mentioned beaded necklace and the rest of the beads were of a more reasonable size. In that case, you would be drawing attention to the big bead as a focal point. Size allows you to direct the viewer’s eye and their impression of the work.

It may seem that bigger items will be more impressive or have a bigger impact but, honestly, very small artistic creations can be just as fascinating, sometimes more so due to the skill needed to create beauty in such a small space. I think you can see that in the opening image of this post. Small art requires the viewer to come close to it to really see the details, creating an intimacy between the viewer and the piece.

So, have you ever thought about these considerations for size when creating your work? Don’t worry if you haven’t. It’s not that uncommon for size to be determined in some arbitrary or organic manner. And I’m not saying that doing it that way is wrong, but you could be missing out on an opportunity to better express your intention if size was a conscious decision.

 

A Sizable Story

One of my high corset collars with stitched copper and polymer embellishments.

When I was a working artist, I often made decisions about size based on what I thought people would want. It wasn’t a particularly conscious choice, more of an aim not to make pieces too big. I was not trying to make statement jewelry, but rather something that could be comfortably worn all day, or so that was my train of thought.

I can’t say what got me to start thinking about size, but at some point, I started to ask myself why I was afraid to go big. So, I started to push myself, making big collar pieces that would sit as high as the jawline and come down to the collarbone. Some were a little crazy, some were so uncomfortable, but I still found so much joy in making all of them.

I found something freeing in pushing myself beyond what I thought my market would like. And, as it turned out, my market liked them big too. I sold every one that I put up for sale. They never came home with me after a show. So, what I discovered was that the sizes I had been working in were completely self-imposed without any supportable basis for my choices other than my own fear of not being able to make a sale.

Once I realized why I had been working in those smaller sizes, I was able to start making decisions based on what the work needed to be instead of what I thought the market might want. For example, if I was going to make an ornate piece with the intention that the wearer feel like a queen, I would probably decide that it should be big and bold, not small and delicate or demurely moderate, to better emphasize the feeling of nobility I wanted it to embody.

 

Georg Dinkel works large when he is trying to make a point about our reverence for technology, like with this iPhone docking station titled IReliquary.

What’s Your Size?

So why do you work in the sizes that you do?

Is it purely functionality or rooted in the idea of what people would expect the size to be?

Is it limited by the tools or forms you have on hand, or by the capability of the materials being used?

Do you let the size come about organically or unconsciously or do you make a conscious decision about size based on the impact or response you would like the viewer to have?

I truly don’t believe that there’s really a wrong way to determine the size of your work but, like any design element, you are only truly a master of it if you are aware of its possibilities and make conscious choices.

So maybe this week, think about the size of your artwork in terms of your intention. Look at pieces that you’ve made in the past and ask yourself how the look and message, if there was one, would have changed if the piece had been smaller or larger. And in the next few things that you design, ask yourself what size piece would best serve the artwork before letting your tools or expectations of scale determine it for you.

 

Goodies are About Gone

Support this blog and your creative endeavors … join the club!

If you didn’t see the newsletter yesterday, I shared the stock I have left for a few special items that were first offered to Art Boxer Club Members, but a couple things are sold out or nearly so already. These are limited items that I will periodically offer publicly, without the discounts or freebies club members get, when there is extra stock, so if you can’t join us in the club, keep your eye out for my newsletters and sign up here if you aren’t on that list for my next offering.

Getting first dibs as well as discounts and freebies is one of the advantages of being part of the Art Boxer clubs, along with the weekly mini-magazine pick me up you get in your email. (The Art Boxer Success club that includes coaching is also unavailable at this time as spots are full up but I do have a waiting list going – just write to me if interested.)

These limited supplies are available on this page if you are still interested.

 

All Quiet on this Western Front

I have little to report on the home front. I did go in in for a small surgery Thursday only to find out I’m going have to go back in six weeks or so from now to have it completed. Nothing is straightforward and simple this year, is it? So, just trying to make myself take it easy this weekend although I am just a horrible patient in that regard.

Next weekend, assuming nothing else weird happens, my better half and I are going to slip away for the weekend to test the camper van conversion we’ve been slowly working on. I do plan to put something for you together before I go so you should still be able to visit with me next Sunday.

In the meantime, all your hopes and plans, big or small, all go off as intended this week!

Read More

Preciousness

October 4, 2020
Posted in , ,

Kathleen Nowak Tucci going big with not-so-precious intertubes and other disposables.

What would you say if I suggested that you create a piece and then, after you are done, remove your favorite bit? Yes, I realize the request might be physically impossible without causing complete destruction but, alternately, what if I asked you to destroy something you just spent your valuable time and effort creating?

I know you might be wondering if this is some kind of dreadful crafty torture. Why in the world would anyone ask that of you and what would be the point?

Well, this was done to me and a couple dozen other classmates back in college… twice.

The first time was in a creative writing class. We brought in a piece we had been working on all week then were asked to highlight all of our favorite lines. We passed the highlighted sheets to the person next to us and then the professor asked that we scratch out all the highlighted lines in the story we had in hand.

Of course, all us sensitive little budding Hemingways and Dickinsons sat there stunned and appalled as our pieces were read aloud without the sparkling gems that we thought would certainly reveal our genius. Strangely enough, all but one of the pieces still made sense and sometimes, the author even admitted it sounded a bit better. The point was, the professor said, that we tend to fall in love with phrases or sentences and will leave them in even when they don’t serve the piece.

The point was that without our wittiest word choices we could, in theory, make better editing decisions. In art, is it possible that we could make better design decisions if we were willing to set aside the glitzy accents we love so much or not fall back on our favorite tried-and-true textures all the time?

The second time I had a professor crush my little angsty ego was in a ceramics class after we each had done a small series of slab vessels. The professor asked us to pick up our favorite piece, bring it to the center of the room, and hold it up. We were then asked if we would be willing to drop it from a height into the trash bin that sat there. Of course, no one did it at first and he just stood there waiting until a couple brave souls let their pieces go. Then the pressure was on for the rest of us to follow. Even though I wasn’t particularly attached to the piece I had in hand, it was still so hard to drop it but I did. I seem to recall that a handful of students did refuse.

Sounds like a real jerk of a professor to ask such a thing, right? Well, I have to say that, at first, that’s what I thought but then he started to talk about preciousness. His conversation had something to do with becoming too attached to particular pieces. He wanted us to put value on our process, our growth, and learning, not on impressing him or our classmates. I think he was also looking for a way to wake us up as he had been getting frustrated with our attention span during the lecture portion of the class. Well, he sure did that.

I remember thinking about that lesson some years later, when I was better able to take it in. It made me realize that each successful piece I made was really just a step in a journey more so than an end goal unto itself. That changed the way I looked at my work. And it somehow made me braver.

I still did, and do, have favorite pieces that I cherish and will never sell, but seeing the work as steps and creation as a process rather than an investment of time in an end goal has allowed me to work a bit more freely. I have a ton of pieces that remain unfinished, and although it’s disappointing every time to come to a point where you realize it’s not going to succeed how you wanted it to, I don’t have any qualms about setting it aside. I don’t see the work as wasted because I know I’ve gained a little bit more experience and a little better understanding of the process. I’ve let go of the preciousness I used to have about everything I made.

Preciousness arises not only in our valuing our time to such an extent that we will not give up on a piece even when it’s no longer salvageable, or ignoring possible design solutions because they would eliminate our favorite part, but it also happens with the material itself.

Liz Hall creates in polymer and (a lot of) precious metal clay.

Quite a few years ago, I was itching try precious metal clay but it really wasn’t in my budget. Then I found some at a really great price and bought it. But you know what? I never even opened the packages. I just couldn’t get myself to work with this very expensive material for fear I would ruin it. But, of course, it’s rather wasted now that I’ve had it so long that is not workable. Pretty stupid, right? But we can be like that, putting value on the material and not on the process and the joy that we get from learning and creating.

Preciousness is tied into fear and failure in a lot of ways. Our idea of what we think we can do or what we think we should be able to do may be so lofty or so dear and treasured that we are afraid to try, fearing that we will make a mistake and ruin our efforts or that it will not come out as we imagine it. So, we do nothing, which is the same as ruining it, just really early on.

We may also get to a point in a piece where we love it so much that we are afraid to take the next step, a step that might spoil it, and so we set it aside, with all the best intentions to take that next step at a future time but all we’ve done is deny, or even end, the work’s potential.

I thought we’d start out this month on the concept of preciousness because it felt like a good segue into discussing October’s design theme – size.

Preciousness is one of those factors that comes into play when we decide on the size or scope of the work we will take on. Our sense of preciousness can make us hesitate to do something large or particularly complex, as we may fear that we will invest a lot of effort, time, and materials into something we are not assured will be successful.

Julie Eake’s cane mosaic portrait of actress Sophie Turner was, like most of her cane mosaic portraits, a huge undertaking. But aren’t we glad she takes those risks?

But, again, have we not already failed by not attempting it in the first place?

If we looked at everything we create as precious, all the time and effort that we put into it as well as the finished work, we would have to play it rather safe in the studio. However, art is not about playing it safe.

Art is largely about the risks you take.

If you’re not taking risks, then are you actually creating art? There’s nothing wrong in creating just for that sense of accomplishment or the high of that Zen like flow we fall into when the work is familiar and comfortable. It is more than valid to have the process of making things with your hands be the primary purpose in what you do. However, it’s the hours of exploration, the failures, the false starts, our vulnerability, the deep digging, like miners looking for gold, that makes the work that we inevitably uncover truly art.

The risks we are willing to take is the thing that is truly precious.

 

So, keep the concept of preciousness in your mind as we talk about size this month. Of course, we’ll talk about variation and contrast in size since that is what is primarily being referred to when speaking of it as a design element, but there are other things about size that we can take into consideration as we create, move forward, and grow as creatives.

 

Speaking of considerations…this week, I am going to have to take my health into consideration, so although I do plan on preparing a blog for next weekend, if it ends up being short or skipped it’s because I’m having a little surgery towards the end of the week. It’s just my esophagus and I should recover in all of two days. I have to fit in all my usual physical therapy before then though, along with all the regular weekly business tasks so it will be a full week.

Don’t worry though – all you club members will get your Midweek Mini-Mag as usual including a goodies giveaway so you can look forward to that if you signed up for one of the clubs.

 

If you haven’t signed up for one of the clubs yet but really appreciate the information inspiration you find in this blog, help support this project by subscribing! Get your weekly mini-mag, exclusive discounts, giveaways, and special offers along with your support. With everything you’ll get, you can also think of the club as a unique and special way to acknowledge the preciousness that is your creative self!

Read More

Relationships in Texture

September 27, 2020
Posted in ,

Evgeniya Aleksandrova has a rough texture over everything here but varies the depth and pattern of the texture as well as the color.

Since we talked about tactile texture last week, it would seem logical that I would talk about visual texture this week.

But I’m not! I don’t want to be too predictable!

No, that’s not why. Actually, it’s that most of what needs to be said about visual texture has to do with the usual recommendation of choosing characteristics that fulfill your intention. If you read my blog, even sporadically, you’ve heard this before.

As long as you understand that visual texture is a purely visual variation on or within a surface (such as marbling, mokume, ikat, or any application of an ink, powder, dye or paint medium), then, as described in the post from the week before last, you can choose visual textures simply by coming up with adjectives to describe your intention and do likewise with possible visual textures and match them up based on similar adjectives. That is the core of the approach for working with visual textures.

So, that being established, I’d like to, instead, talk about another thing you’re also familiar with if you have been reading the blog for the past couple months but which we have yet to specifically associate with texture.

Creating a Relationship

Last month I talked about choosing color palettes in terms of contrast and similarities. But guess what? Combining different types of textures also plays by the same basic rules of contrasts and similarities.

I love how Joy Kruze echoes the spots in the stone with the spots of metal in the texture created in the spaces between the metal lines of her unusual bezel

Most work you create or look at probably has more than one texture. It could be a combination of smooth and rough textures or a variety of different rough textures or variations of smooth ones. You may often combine tactile texture and visual texture, as well. What these combinations all achieve is variation. Variation in texture is pretty instinctual for most creatives, as is a desire for variation in color.

The variation between textures can be heavily contrasted but, like color, it helps to have at least one similar characteristic so there is some relationship between them. With texture, you can actually use other design elements to create that relationship such as using the same or related color or a similar shape for the texture’ s space. Once you have that similarity, everything else can be contrasted.

But what about using similarities between the characteristics of the textures? For instance, you could create only rough textures but vary how that roughness is created. Or all your textures could be stippled holes but you vary the shape or size of those holes.

 

Just as you need similarities, you’re probably going to want variation, too, not only to create contrast, but also to create shapes, layers, and compositional direction (which we will get to later this year).

The Need for Variation

Variation, as always, adds some level of interest, energy, and complexity to your work and you can adjust how much you add of these by adjusting the variation between textures (or any design elements) – from subtle to bold or somewhere in between.

Let’s say you want to make a piece with a strong graphic look. You’ve already chosen hard edged graphic shapes and bold colors. What about the texture? You might choose a slick, glossy surface as a primary texture. Now, what other textures can be used to vary the surface but have it still related to a glossy one?

Hélène Jeanclaude creates glossy surfaces on all parts of this necklace but between mica shift and mokume, and the contrast of colors, she creates variation and lots of energy.

If you want to go subtle, you could stick with variations on smooth textures such as a matte or satin finish. Alternately, you can choose to rough up the surface but in a very orderly way similar to the orderliness of your graphic shapes. This can be done with a series of dense, parallel lines, or a dense but orderly mark.

As long as the marking of the surface is the only thing that changes, then all raised portions of the comparatively rougher texture will be glossy. That will give you your similar characteristic – the gloss of the smooth surface and the occasional gloss of the rough surface.

This is not to say that you can’t have textures that are completely and utterly different. The extreme contrast could be, in and of itself, a relationship. That difference will cause tension or discordance, but that could be exactly what you want.

Here are just some of the characteristics in texture that could create similarity or contrast:

  • Tactile or visual
  • Smooth or rough
  • The quality of the finished surface (glossy, satin, matte, or chalky)
  • Type of mark, technique, or tool used to create the tactile or visual texture
  • Organic versus graphic styles
  • Size (how much space each texture takes up)
  • Direction (if the texture visually flows or moves from one part of the piece to the other)
  • Shape of the space it is applied to

A visual texture shows variation in density and repetition of the dots that make up this surface. Melanie Ferguson actaully etched the surface and then polished it with cold was so she has smooth tactile but rough visual texture on her surfaces.

As you can see, other design elements can become quite intertwined with texture. Marks, lines, size, direction, and shape all can play a role in the similarity or contrast of areas of texture in your piece. It really doesn’t take much for us to see a relationship between textures. If it’s there, we’ll see or sense it and the design will feel more cohesive for it being there.

Since that texture relationship can be, and often is, developed through other design elements we work with, this is not always something you need to be wholly conscious of. But, if something in your work is not looking right, check for the relationship between your textures as well as your colors and other elements.

And, if next time you are looking at your work and feel like it needs some contrast in its tactile or visual texture, just look at the dominant texture that you have and, using it as a starting point, choose possible other textures or design options that will create at least one similar characteristic, still provide contrast at the level that makes sense for you piece, and has characteristics that recall the theme of your work.

 

Last Days for Club Discounted Forever Pricing

3 days left to join the Devotee or Success clubs at the FOREVER discount price so you can get first dibs on limited stock offers, discounts, and goodie box giveaways, all while getting a mid-week mini-mag of brief articles to keep your creative energy and ideas going. And right now you can also get in on it with a 2 week free trial! .

So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club 0r buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.

 

Visual Contrast … Out of Doors!

Packing up to take the camper van conversion for a test drive up the coast, just one night. That’s been my little side project that I’ve been getting myself lost in for an hour or so most days. It’s not completely done but good enough for one night out for my better half and me. I need some contrast between life inside this lovely home of ours and the outside and distant world! So, I am off. I hope you all are looking for new and novel things to add a bit of excitment and contrast in your lives as well!

 

 

Read More

Tactile Allure

September 20, 2020
Posted in , ,

Melanie West’s satiny smooth finish has a heavanly tactile texture even though many people might think of her pieces as being textured because they’re so smooth. Yet smooth is actually one of world’s most loved textures.

How often do you touch art?

No, I don’t mean being the unruly museum visitor who gets yelled at by the docent, but in your everyday life, how many things do you touch that you would also consider art?

Works in the applied arts, which encompass decorative art, adornment, and functional objects, are often things that we touch. Because of this, the tactile texture of most applied art is exceedingly important. Not only can the wrong texture put someone off from buying a piece, but the right texture can make a huge difference between people liking your work due to its visual appeal and being utterly in love with it because it feels so good to touch. It is also another means by which you can express your intention.

Choosing Tactile

The first time I touched a Melanie West polymer bead, it was like taking a bite of the most heavenly chocolate mousse. Her finishes are flawless and so soft; my fingers just couldn’t get enough. That kind of tactile reaction is golden. It also supports her soft and organic themes. As wonderful as her finishes are, that kind of texture may not be wanted in your work or may not even be possible due to techniques or materials you are using.

The point is that her textures are part of the experience of her work and, if you’re creating things that will be handled, you too should consider the experience of touching your piece as part of its aesthetic value. As always, let your intention drive your decisions, but pay attention to the physical sensation experienced when handling the work and aim to have it support your intention, alongside all your other design decisions.

For instance, if you want to share your love of the beach through your work, think about the physical sensations that stand out the most – the soft breeze on your face, the refreshingly cold water on your feet, and your toes digging into cool sand. Now, how do you translate those physical sensations into tactile texture that will help you share that experience to those who will handle your work?

You can do so by thinking in terms of those adjectives – soft, refreshing, and cool. You probably want those to be the dominant sensations so don’t go for, say, a sandy texture just because the beach has sand. Is a gritty, sandy texture going to convey soft, refreshing, and cool? Chances are, it’s just going to remind someone of getting sand in their shoes and other uncomfortable places. You can create a visually sandy texture that includes sandy colors and a speckled look, but in terms of tactile sensations, going for a soft, maybe matte surface that will feel cool and soothing to the touch will share something closer to the sensations you want to relay.

Felt may have textural limitations but the final texture is still a choice. Olga Demyanova contrast a tight, even texture with the rippling and rougher orange edging and accents in this intriquing handbag.

There are a lot of materials that have limits on the tactile textures available. Polymer clay can replicate most tactile surfaces except for fuzzy, but felted work is limited to that dense and slightly rough feel of matted wool while glass will almost always have a smooth aspect. There are also techniques that create their own texture or limit how you can further manipulate the material to create texture. Learn the range of tactile sensations available in the materials and techniques you use so you know what options you have.

 

Work that Begs to Be Touched

There are a couple things you can focus on in order to create work that people will love to touch. It primarily involves smoothness and variation.

 

Smooth Surfaces

Our sense of touch enjoys traveling along a pleasantly smooth substance such as polished metal or stone. But what we like most is softness, such as a fluffy blanket or bunny fur. Softness is a type of smoothness as it allows our skin to glide across, unimpeded.

Note that you can re-create the look of fluffy and furry textures in hard substances such as clay or wood but you can’t re-create the same associated softness because, in those materials, you lose the ability for our fingertips to effortlessly glide across it in the same way due to the unevenness in a hard surface. So, recreating the look of fur doesn’t necessarily re-create the tactile experience. The ‘look’ of fur is just a visual experience.

So, be careful to think of smooth tactile texture, not in the way it looks, but the way it feels.

 

Klavdija Kurent gives the wearer of her jewelry much to explore with their fingertips.

Variation

Our fingertips were made for receiving information, and lots of it, so they do very much enjoy a variation in texture. However, we don’t normally enjoy variation that is sharp, prickly, scratchy, or sticky. These textures make it hard for our fingers to glide along and take it in, not to mention that they are also often painful.

However, bumps, grooves, and fine lines excite the nerve endings. It’s just like the sense of taste – we aren’t too happy with things that are bland but a lot of flavors that go well together thrills our tongue. Our fingers, likewise, enjoy complexity.

 

The Best of Both – Smooth and Varied

I think you’ll find that pieces with both a smooth and varied surface attain the pinnacle of touchableness.

Take a look at the pearled bracelet here. It is not even in your presence and you probably still feel a tiny urge to reach out and touch it. That’s because each half pearl has a small, smooth surface which is further aided by the round and unimpeded nature of its shape as well as there being a varied field of them.

The combination of smoothness and variation in this bracelet makes for an engaging texture, adding energy to the piece both in its tactile and visual nature. Note that this also has a bit of rough texture around the edges to provides textural contrast. Because contrast is important in texture too!

The contrast of texture fit well into my intention of showing the classic perfection and allure of pearls in an organic setting. I wanted it to be a subtle reminder of the messy world pearls actually come from even though we now associate them with neat, tidy, and conservative dress.

 

The Tactile Balancing Act

The textures you choose will dictate limitations in terms of surface treatments and other parts of your design, so you have to balance out your tactile texture choices with your other design choices. For instance, if you create a deep and dense texture on a light color, it’s going to appear darker, which you might not want.  Or you may want a very smooth surface but want pattern to raise the energy so you would have to figure out how to incorporate pattern visually with inks, veneers, or other smooth surface applications.It just needs to make sense for your intention and the limitations of material.

If your tactile texture decisions, weighed in light of all the other decisions you have to make about color, shape line, function, etc., are chosen in service of your intention, you are sure to have a beautiful, cohesive, and interestingly touchable design.

 

Should I Call Them Mini-Mags?

The first week of the Art Boxer Clubs has commenced and one of the first comments about the weekly Pick-Me-Up is that it ought to be described as a mini-mag. I guess it is. It’s hard to take the magazine attitude out of me. There were 5 little articles and a good handful of links for further exploring.  So, yeah, maybe it is a mini-mag. I might have to rethink what I call it.

But regardless of what it’s called, joining the club will get you a little extra boost each week and at least once a month, you’ll get a special discount, a first dibs or limited stock offer, and/or a giveaway. And right now you can get in on it with a 2 week free trial and a FOREVER discounted rate.

So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club (there are only a few spots left in this upgrade to personal coaching option, at least as of my writing this), or buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.

 

No Fires Here

We are still a safe distance from all the fires and the sky has started to clear up from the smoke so nothing too exciting to report from Tenth Muse central. I’ve already gotten started on the next project but I don’t want to say too much about it. It seems like every time I say something, I get jinxed and delayed. So, you’ll just have to stop by and check in with me on the weekends, or read the newsletters, or, if you want to be the first to know, join one of the new Club options as Art Boxers will be the first to know (as well as getting extra discounts … just sayin’.)

 

I hope you all have a relatively unexciting week yourselves. It’s not like we need much more excitement with the craziness of the world providing plenty already. Just go make beautiful things and be kind and caring to each other.

Read More
If you love these posts ...

Click a tag …

art blog artist artistic influence artistic inspiration artist inspiration art magazine beads bracelet caning clay clay blog clay magazine color composition craft blog craft magazine creativity design earrings inspiration inspirational challenge of the day jewelry mixed media movement natural nature necklace organic pendant polymer polymer art polymer arts polymer blog polymer clay polymer jewelry polymer magazine sculpture technique texture The Daily Polymer Arts Blog the polymer arts The Polymer Arts blog The Polymer Arts magazine tutorial tutorials

Archives