A Touch of Metal
August 16, 2016 Inspirational Art
Have you ever considered combining polymer and metal but shied away because you just don’t have the metal working skills? Well, you don’t have to be a metal smith to have fully integrated polymer and metal pieces. I thought I’d share a few ideas for you to consider if you have been hesitant to try adding more than a metal chain to your jewelry or even if you do some metal work, might want some ideas for easy but sophisticated projects to stock your store or next show booth.
Here is probably the easiest and one of the best ways to bump up the perceived value of your polymer jewelry. Get yourself some good quality precious metal bezeled jewelry elements. Pendant bezels are plentiful with a wide variety of designs and sizes. Creating the right sized polymer cabochon or inlay doesn’t take much more than impressing your finished sheet or veneer with the bezel itself, cleaning up the polymer edges, and then, after curing and properly finishing/sealing your polymer, glue it into the form with a compatible glue such as E6000 or Gorilla Super Glue Gel.
You may want to build up and round off the element to give it more of a cabochon shape as Rebecca Geoffrey does here with these beautiful sterling and polymer pendants. To do this, cut a thick piece of polymer scrap in the same shape as the bezel but trim it down, cutting slivers of clay off the edges that are the same width as the treated clay sheet is thick. Then you can round off the edges of the scrap clay, lay your treated polymer sheet over it, and smooth it over the shape.
I use deli paper over the treated clay as I smooth so my fingers do not smear or dislodge any of the surface treatment. You will also want to check that it fits the bezel before curing. If it is too big, press the sides in. If too small, gently press the cabochon to spread it out, going around the edges first and then move towards the middle until it fits. You might want to practice with a few scrap clay versions to see how it works with your new bezels before working on some precious mokume veneer or painstakingly treated sheets.
Inspirational Challenge of the Day: Try a metal bezel! If you’ve done bezel pendants before, try a ring or bracelet with a channel or try a more complex bezel set purchased through fine jewelry suppliers. Better yet, collaborate with a metal smith to create unique bezels. If you do wall art or decor, try bezeled polymer as elements or accents.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Outside Inspiration: A Tall Order
August 14, 2016 Inspirational Art
As promised, a little weekend dose of art is here for you. This piece is a mixed media painting by Amy Longcope and definitely something that would bring joy and energy to a room. I’m going to let an excerpt from her biography speak for her process:
“Amy Longcope’s approach when creating a new piece is not to paint something specific, but rather to unleash her intense desire to create with beautiful colors and varied shapes that encourage and evoke meaningful thoughts in both her and the viewer. Amy uses various mediums and gels to build layers and textures of color.”
Tall canvases are wonderful to create on (ones just about this size, 4′ x 1′, are what I often worked on in art school) as they allow you to explore strong vertical elements and imagery that even portrait orientation could not. They also fit in those odd spaces between furniture, next to a door or even on a door.
Amy’s intuitive color choices are stunning and fearlessly saturated. Take a look at her website or spend some time going through this great gallery of her work.
I am going to switch up blog days this week so I won’t have one for you two days in a row. I know how much we all have to read these days! So we’ll see you Tuesday, Thursday and Saturday.
Inspirational Challenge of the Day: Work on a piece that emphasizes the vertical. Tall and thin can certainly do this but how imagery or elements are laid out will emphasize vertical composition as well. Follow any path on this idea that playing around with it leads you.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Curative Clay Doodling
August 12, 2016 Inspirational Art
I tried to get something up on Wednesday but fate was not going to let that happen. I have, however, been relieved of my elderly parent watching duties until the end of next week so I should be able to keep up and will try to plan ahead. Plus, I’ll sneak in a little something more over the weekend to make up for that missed day. So look for that by Sunday.
Wall art to cheer the poor souls who have to stay put and convalesce is still on my mind. I do think this lovely Klimt inspired piece by Tammy Durham would be just the thing to add a bit of cheer and a sense of fun to just about any place. I really liked this side view because you can see just how dimensional the piece is as well as getting a bit closer on the detail, at least from this one end.
All the winding trees look like a kind of doodling. I can imagine rolling snakes of clay and just adding whorls and curls, letting the trees grow by instinct. Just a bit of clay doodling which would be great for the artist and almost as much fun for the viewer. You can even see this in the process that Tammy has posted, including a full front view, with a dozen or some images throughout her feed on Facebook.
Inspirational Challenge of the Day: You know what I am going to suggest … clay doodling, of course! Roll snakes, balls, and/or pods of clay. Wind snakes into swirls, squish balls into dots, press pods into leaf shapes, or just whatever you like, and start building your clay doodle on a sheet of clay. Let you mind go and enjoy the process!
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Sprucing Up the Place
August 8, 2016 Inspirational Art
I’m sorry I am a bit late getting this out today. I have, unfortunately been spending a lot of time at the hospital where my mom is laid up with a fracture of the spine and also at the family home where my dear father is valiantly fighting the vagaries of dementia made more difficult by my mother’s absence. So this week my timing might be off but we’ll get everything done as needed including sending out beautiful things to admire every other day.
I do wish hospitals had a bit more color, don’t you? The care my mother is getting is absolutely wonderful but there is nothing on the walls anywhere but the lobby at this hospital. I was thinking some wonderfully colorful polymer art would be just the thing so I thought I’d just ponder what might really spruce such a place up. This intriguing piece by Alev Gozonar would just be so lovely in the halls or, better yet, in the room. The rich autumn colors of the fluttering leaves so beautifully contrast with those strong lines made from steel cable. It would be something lovely to contemplate besides the TV and all the machines one has around the bed.
Well, I can dream that someone someday will turn hospital rooms into galleries of art but in the meantime, I am off to find a cheerful flowering plant I can take to my mother, the retired horticulturist and to pick up my dad’s favorite candy, licorice, to bring him some good cheer as well. And a bottle of port for myself for later. We do need to take care of ourselves as well as all those that need us!
For more beautiful wall art work by Alev, visit her website or her Facebook page.
Inspirational Challenge of the Day: Design or create a piece of wall art specifically to brighten up a place in your house you don’t usually hang art in such as a bathroom or a garage, maybe even in closet. What colors, imagery and textures would positively change the atmosphere and make one smile when they opened the door or walked in?
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Outside Inspiration: Rings and Resin
August 5, 2016 Inspirational Art
If you are one of those clayers that, like myself, sees something cool in another material and immediately asks yourself, “How can I create that in polymer?” then the rings from this group will really get your gears going. This ring is made from wood and resin. But why not polymer and resin?
Why not, indeed. The mysterious landscape and that rising gold cloud within just snares the imagination. The group, My Secret Wood, is a team of artists that create hundreds of these one of kind rings using different woods, varying inclusions and a range of tints in their resin. I imagine these are done with molds and some very refined resin skills to eliminate large bubbles but I could see this kind of thing being very do-able with polymer as the ring base. Not that I think one should just up and copy this form. Obviously not. And besides, polymer acts so differently than wood that the outcome would be a world away from this. But a resin cap would help protect surface effects and fragile forms that otherwise would be risky to have on the surface of a ring.
Do take some time today to wander through their gallery of available rings. It is sure to get your imagination going if not tempt you to buy your own.
Inspirational Challenge of the Day: Design or create an object of your choice in a way that shows an inner world. That could mean any number of things to you so don’t try to be literal but let the idea roll around in your mind and see what “inner world” means to you and see how you can transform that concept into a work of art.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
A Ring to Start With
August 3, 2016 Inspirational Art
Have you ever made a polymer ring? It’s not one of the more common polymer jewelry forms but it sure is fun and they are becoming more and more popular. They can be a bit intimidating since they need to be durable and they need to be sized. When creating ones to sell, you have to either make a wide range of sizes or you have to stick with just a selection of the most popular and then maybe offer custom-made ones. In any case, rings can be a touch tricky but I think once you’ve made one, they are kind of addictive.
So to start your addiction, you might want to try out this simple but elegantly styled ring using the online tutorial on the Craftliners blog. These simple but pretty little rings get their style from the special effects clay in the Glamour and Nature line of clays from Cernit. You can get granite and other faux effects by mixing your own clay with inclusions or just start with solid colors.
The Craftliner blog is posted in support of the online wholesale hobby and craft suppliers Craftlines. Although the shop is wholesale, the blog is for everyone and has a lot of great little gems in a variety of mediums. You can check out what they have to offer from the blog home page.
For more specific polymer ring ideas and how to make them, take a look at your copy of the Winter 2012 of The Polymer Arts or get your copy here.
Inspirational Challenge of the Day: Make a simple wrapped ring. Give yourself all of 30 minutes to condition, roll, cut, and form the ring. The time limit will keep you from over thinking it. Just make one and don’t worry about the outcome, just enjoy the experience. Then once you have that one under your belt, let your imagination run wild and make more!
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Challenging Rings
August 1, 2016 Inspirational Art
Can you believe it’s August already? More than halfway through the year! How have you been doing with your New Year’s resolutions? I have 2 out of 3 down pretty good. But like me, many of us have not been able to keep up with polymer challenges and studio goals and have had to adjust them. That’s okay. The real purpose of a challenge is to keep at it and see what you can discover if you push yourself. Just this week, I have finally been able to keep a steady studio schedule (a couple of hours every other day which is a 100% better than what I had managed at any time the first half of the year!)
Then there are amazing people like Wendy Jorre de St Jorre who have done this kind of thing at least a couple of years in a row. That’s dedication. Last year she did bangles and this year she’s been doing rings, one each week. She takes her amazing canes used for necklaces and bracelets as well as various decor items and works them into beautiful bands. Although some of the original canes distorts quite a bit as it is wrapped around the small domed band, because she has such great color sense and keeps an eye on the balance of contrasts, the abstract (and even not so abstract) results are just gorgeous.
To see what she has accomplished aside from this beautiful ring here, hop over to see Wendy’s adventures on her Flickr photostream.
Inspirational Challenge of the Day: Take an application usually used in a different kind of jewelry or decor and create a ring. Or if you do create a lot of rings, create something unusual like a hat pin or an ear cuff.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
IPCA Auction … Join the Madness
July 29, 2016 Inspirational Art
Live auctions are mad. There is such a scramble for the items up for bid because you know it’s your only chance to get that rare piece that caught your eye and you can feel that same energy from others in the room. Online auctions won’t have that same live energy but there is a scramble nonetheless! The IPCA, in an effort to include members that were not able to attend Eurosynergy this year, saved about half the donated items this year and created an online auction that you can participate in.
Have you ever dreamed of owning an original Jeffrey Lloyd Dever, a Melanie Muir, or a Bettina Welker piece? Those big names and others have donated their gorgeous work to help raise money for the IPCA projects. So it’s not only a chance to own a beautiful piece, like this unusual Kathleen Dustin necklace, but its money that goes to a cause dedicated to polymer artists. The IPCA has a lot of ambitious ideas on the drawing board but they need money to get them of the ground. So take a look at the items up for bid on the IPCA auction page.
Our contribution was a copy of Polymer Journeys signed by 25 of the contributing artists. If you haven’t gotten your copy yet, this is the copy to have. Or if you have one but want one signed by so many of the artists you love, you can bid on this rare copy here. If you just can’t wait, get your copy from our website at 10% off the cover!
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Into the Forest
July 27, 2016 Inspirational Art, Polymer community news
Okay, so this might just be a week of announcements but they are exciting announcements, let me tell you.
During her general assembly presentation at Eurosynergy, Laura Tabakman spoke about her projects, many of which are huge undertakings involving installations of her work and the work of others in anything from organic floor compositions in a gallery to entire bridges yarn bombed by the whole of the local community. So it wasn’t a complete surprise that she has a very ambitious project up her sleeve right now. The difference is that this project can include you!
Laura paired up with the very organized and motivated Emily Squires Levine to work on a project inspired by their time under the aspens in the Rocky Mountains of Colorado. Living here, I completely get what got their creative juices flowing. I am constantly amazed by the color, variety and just stunning beauty of the mountains here. I honestly have yet to find a place in the world I think is more beautiful than the scenery here. Laura and Emily were similarly impressed and started working out an idea for a large Rocky Mountain forest inspired installation. Later on they got Julie Eakes on board and between the three of them the seeds of the “Into the Forest” project was born. And just hours before Laura’s presentation, the threesome set up a Facebook page to help facilitate what is certainly to be an immense and fascinating project.
So what is “Into the Forest”? The image here is their first assembly based on the project idea and here is their description:
“An international collaboration of polymer artists and enthusiasts inspired by the high altitude aspen groves in the Rocky Mountains, “Into the Forest” is an evolving mixed media international installation organized by collaborating artists Laura Tabakman, Emily Squires Levine and Julie Eakes. Imagine yourself in a forest. On the ground beneath a canopy of branches and leaves, unexpected life exists. Look closely, be amazed at the variety of these organic forms. Be a part of our Forest and help it flourish! Create pieces which will form its life elements. We will combine them into living colonies of varying shapes, colors and sizes. We are looking for 1000s of elements, created by our international polymer community, to inhabit our Forest.”
To get involved, request an invitation to the “Into the Forest” Facebook group. There are already over 150 polymer artists and enthusiasts that have pledged to help. I know I’m excited. Jump over to the Facebook page to get more information and follow the project on Instagram (intotheforest17).
Inspirational Challenge of the Day: Here’s a simple one … join the project! Make one element a day or at least every other day, to send off to the project. I started on leaves on the weekend and ideas for lichen and other creeping color. We have until April 4th of 2017 which, making one little simple piece a day means you could have a couple hundred to contribute by April!
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
First, my apologies for being absent the last few weekends. I kept thinking I’d be able to post something, but my days have been exhausting.
The roller coaster of the last month, not to mention the last year and a half, has really brought into perspective the concept of self-care. Balancing responsibilities with care for yourself as well as for others can be a tricky thing but, it’s not unlike art—if the composition can’t achieve some sort of balance, not much else is going to work.
So, I’ve been hashing out some ideas that will allow me to keep chatting with you as well as do what I need to do for my family and with my creative projects. I am hoping that will all be settled this coming week and we can have a little chat about that next weekend.
Persistent Ideas
In the meantime, let me share a thought by a fellow polymer artist, Adam Thomas Rees. He posted this intriguing piece, seen above, on Facebook last month, saying:
This was my first hybrid sculpture mixing metal and clay. I’d had this idea floating around in my head for about 10 years before I finally went for it. If you have an idea you’ve been sitting on, it might be time to go for it!
I have to agree. The first of the two novels I’m working on was also started a decade ago, maybe more. It can take some time to get around to it but, if an idea sticks with you, I think it’s a sign that you should really try it out!
What have you always thought about doing but haven’t tried yet? It can be very invigorating to take on something brand new and challenging.
Annual Damage Sale!
Grab Imperfect Publications for as little as $3.98 or Perfects & Supplies for 30% off
So, it’s that time! I’m cleaning out the mailing room and collecting all the publications with a dinged corner or a little shelf wear and am putting all these perfectly readable publications up for purchase at 50%-60% OFF the list price.
- Print Magazines: 3.98 each
- Print books: $5-$12 each.
Half of the imperfect issues will sell out day one if tradition holds so don’t wait!
This only happens once every year or so and once they are sold, the great deals are — whoosh –outta here!
Go here to grab up these steals before they’re gone.
Need Something Else?
Get new PRINT items and design tools for 30% off! So, if you can’t round out your collection of TMA publications with an imperfect copy, you can do so with an amazing deal on a shiny new one!
PROMO CODE FOR 30% OFF : damsale21
Promo code works for any PRINT publications or Design Tools NOT already on sale on the whole of the website.
30% off sale end June 30, 2021. Not good with other discounts, coupons, or on shipping. Damage sale ends when stock is gone, which can be pretty darn quick so don’t wait!
Read MoreThis week, I need to beg your forgiveness as I am recycling a post from a couple years ago. There’s been a small avalanche of family emergencies — nothing life-threatening — and I need to head out to Colorado and Kansas for a couple of weeks. I’ve been unable to put something together for the blog with all the distractions, but I’ve been thinking about this idea of collections again. It seems a lot of us were doing it a bit of exploring last year, which tends to result in lots of unused bits and pieces. So, this might be a useful reminder of things you can do with those bits and bobs.
Do you have a bin or box of pieces and parts of your handiwork yet unfinished but which you are too in love with toss? If you regularly create, I can’t imagine that you don’t. But what exactly do we do with these pieces? Do we hold on to them, hoping that they will be just the thing needed someday or do we toss them?
It can be quite the dilemma, one that even Marie Kondo can’t easily help with because, hey, these do spark joy for us! We see value in them, in that they represent our creativity and what we can accomplish. But do such little jewels of our work belong in a bin where we don’t get to admire them?
I’ve been thinking about this question for a while and came up with a few solutions of my own. If you have a copy of Polymer Journeys 2019, you can see, in the very last entry, my contribution, which is a display case of small exploratory items for which I had no particular use in mind when created them. I created them without thinking, “This is going to be a pendant,” or “This is going to be a set of earrings,” or “This is going to decorate a vessel.” I just made them to see what the material would do, most of which I liked, and they all represented a little exploratory learning experience.
I had already been tying bits onto ribbons and hanging them off the edge of my studio corkboard as little festive decorations. That doesn’t work for pieces that only had one viewing angle though as they would twist around on the ribbons, so I was still in search of other options.
Then I was out talking to the butterflies in my backyard (Yeah, I talk to the creatures in my yard,) and remembering how I used to catch and collect them in shadow boxes as a kid. It just randomly struck me that my little creative bits were like butterflies. They are lovelies I caught in a moment of exploratory creativity and in that small frame of time, they became a kind of unexpected friend, going through that creative time with me. I didn’t want to toss my little friends, even though I had no end-use for them. You don’t do that to friends! You hold on to them and support each other, right?
Does that sound silly? Maybe it is, but it was revealing to me to realize that I kept certain pieces not because they were so beautiful or well done, but because I felt connected to them. So, why not collect them and put them out like a collection of butterflies or a collage of photos? What you see here is what I started making. My husband and I would find shadow boxes at garage sales and thrift stores for cheap, and I’d arrange my bits in them like compositional jigsaw puzzles. I’ve made half a dozen of these so far.
By the way, I use a hot melt glue gun to tack the pieces onto a bit of mat board cut to fit the box. The nice thing about the hot melt glue is that if you do every want to take a piece out of the collection, you warm the back of the mat board with heat gun or hair dryer for a couple seconds and pop them right off. So, your “friends” can come out and play in another piece or a new collection if you like!
As I shared in the previous version of this blog in 2019, people have also used old collectibles display boxes to show off small sculptural pieces or heavy pieces of fabric to pin or hook jewelry pieces as a means of display as well. Look around at how you are other people put together collectibles for ideas about how you might display your polymer bits.
So, do I have your little wheels turning? These should give you ideas not just for what to do with your extra bits, but many of these could be a jumping-off point for creating your own unique show displays and photo setups.
Do you have a cool and unique way to display your extra bits or jewelry? Send me links to images if you do. Put it in the comments below, or if you’re reading this by email, click the header for this post to get to it online to leave a comment.
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More
How adverse are you to hard work and challenges?
Recognizing your ability to face the challenges and incredible effort that goes into creating original artwork can be a necessary, if somewhat painful, bit of self-assessment. Most of us find ourselves on one or the other extremes—either we give up too soon, not doing the work or finding shortcuts that don’t help us grow, or we don’t give up even when the process becomes pointless or detrimental.
Are you one or the other, or are you somewhere in the middle? Or does it depend on the type of work or challenge?
The Easy Way
Trying to find an easy way around hard work and difficult challenges is probably a bit more common. If we’re all being honest, there’s few of us who have never used a tutorial or ideas from artwork we’ve seen to develop our own pieces. That’s okay. I’m not saying that it’s bad or wrong—taking inspiration from other people’s design is one way we learn. However, if you don’t get past that stage, you are missing out on some of the most joyful work you’ll ever experience.
Using other people’s instructions or ideas allows you to create something without putting your creative self or your ego at too much risk. However, it’s taking chances and doing the hard work that makes the successes so exceptionally sweet. By going out on a limb and creating purely from your own inspiration can result in one of the most joyful feelings I think a human being can have. Seriously. There is nothing like hard earned success in your creative work to put you on Cloud 9.
Now why do we feel that way about our own artwork? Well, for one, the work is born of our ideas, experiences, and loves. But more so, it’s because of the struggles we went through either to learn the skills that allowed us to make the art and/or the hard work and time we put into its creation. When it’s done, your talent, your spirit, and your perseverance become a concrete thing that you can revel in and share.
In one of my writer’s group, a friend of mine asked why every story has to have conflict. The answer is that story IS conflict. Can you imagine watching a movie where the hero of the story had everything happen just the way they wanted it to? If Harry Potter just flicked his wand and make Voldemort go away, or Hamlet didn’t care that his father was killed, why would we watch those shows? Do you gossip about the good things that happen to people or the difficulties people are having?
Now, think about how satisfying it is when Harry vanquishes his nemesis and Hamlet finally avenges his father. Those moments are so immensely satisfying to us because of what we went through with the characters to get there. And that is true of anything we want to attain as well. The more conflict and struggle we face, the more satisfying it is when we accomplish or gain what we are after.
There’s actually science behind this. Researchers have studied everything from job positions to winning the lottery and they have found that when people are simply given something without having to work for it, not only does any elation from the acquisition die quickly but people are far less fulfilled and, sometimes, even become depressed. However, when people struggle to get promoted or have wealth because of years of hard work, they are not only happier, but they are also more motivated to keep at it than those that were simply given those things.
So, when you’re in the studio, don’t be frustrated or shy away from challenges. When you find them, think, “This is my chance to achieve something wonderful and fulfilling.” If you presently lean on the ideas of others, challenge yourself to create from your own designs as much as possible if not completely. Take risks. Push yourself just past the point of being comfortable. Do the hard work and see if you don’t find it more than worthwhile.
The Other End of the Spectrum
Now, if you’re one of those that doesn’t give up when you should, or you don’t give yourself the time off when you should, learn to take more breaks both physically and from the work you’re struggling with. It often helps to put a difficult piece away for a little while. Pull it out a few days or a few weeks later and you can see whether it is still worth working on. If it is, you’ll probably see a solution you didn’t see before.
Just don’t be afraid to set aside a piece that is going nowhere. Don’t feel you have to try finishing something because you put a lot of time into it. None of your time spent is wasted. Everything you do helps you learn and hone your skills.
Me, I’m of this sort. A dog with a bone, as they say. I look at every challenge as a battle to be won, and I don’t know the meaning of surrender. It’s rather ridiculous sometimes. I also don’t stop working when I should either, which is why I keep hurting myself.
Scaling Back on the Blog for a Bit
For those of you that were not with me for the Great Elbow Drama of 2019, I developed an advanced form of tendinitis in my right arm and can no longer type with it for any length of time. Well, now I have an overused left arm after too much research for my novel and too much gardening. *Sigh*
So, this post, and probably the next few, will be primarily chatting rather than deep dives into design concepts as I’m limited to using my speech to text software while my arm (hopefully) heals. Searching for a selection of great art images to go with what I’m writing about requires too much mousing I’m afraid. I hope you’ll stick with me though. I’ll aim for a mix of “Life As an Artist” articles like this one and design refresh posts that need only one image for the time being.
In the meantime, for those of you who can, get to the studio, give yourselves some reasonable challenges, and enjoy the fruits of your labors.
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More
Composition is really an intriguing design aspect. It is how everything comes together because it is the structure of it. It’s the bones upon which all your elements and principles are placed. It’s a functional concept and an all-encompassing one.
The structure of our compositions use a number of anchoring concepts, all rooted in design principles. We could learn the principles first but since they are less concrete than the elements you have been learning, I think an overview of the possible compositional structures will allow you to immediately see how the principles of design we’ll get into later can play out in a composition. But in order to talk composition I need to at least touch upon a few of the principles.
Last week, I started your compositional knowledge with a brief discussion of focal points. As we dig into new compositional concepts this week, remember that focal points will be either an element we are strongly drawn to, will have tremendous contrast, will be a place where elements converge, a place where an element is isolated, or will simply strike us as unusual. In other words, they stand out more than anything else when taking in the whole piece.
So, that was a first introduction to that principle. Here are a couple more.
Hierarchy
In your piece there will be elements that stand out more than others and ones that are barely noticed. The one that stands out the most, as you are sure to surmise, should be your focal point or points but after those, all the other pieces will likely be vying for attention in a visual hierarchy. That order creates a perceived perception of each element’s importance.
You can determine what elements are more important than others by giving them more space, making them bigger, having them high contrast, setting them where line or shapes converge, giving them a lot of energy through color, marks, lines, etc.
Hierarchy, knowing which items are most important, is needed for most standard compositional arrangements as their placement can be successfully arranged based on them.
Space
When we talk about space, we talk about positive and negative space. Positive space is usually the action, the focal point, or an area of primary interest. The negative space is usually a background or an area where the viewer can rest from analyzing the more active areas. It’s also all the empty space around sculptural object.
Yes, these principles can get kind of complex that’s why I’m going to take these things one at a time after you get this overview.
Easy Peasy Composition- The Rule of Thirds
The Rule of Thirds provides an easy but very pleasing way to lay out your elements. It is also pretty dynamic while easily remaining balanced. Let me explain.
Imagine a tic-tac-toe grid laid over the primary view of your work, like it is in the opening image of this post. If you look at your work in terms of this 9 box grid, you end up with several choice positions for focal points and breaking up the space.
For instance, the points near where the horizontal and vertical lines intersect are great places to set a focal point as well as secondary focal points.
The grid can also be used to break up the space. If you want two background textures, instead of just splitting the “canvas” of your piece in half, you can put the stronger texture on just one third, covering 3 squares of your grid. The second texture would have more space but if not as visual strong as the other, that extra space would balance against the visual draw of the stronger texture. Again, that gives you balance.
Classic Composition – The Golden Ratio
Like the Rule of Thirds, the Golden Ratio is a kind of grid but this time, it is based on the ratio of the body and other natural occurrences—it’s a matter of proportions.
A Golden Ratio grid for composition is made up of Fibonacci squares which are a visual representation of a mathematical sequence of the same name. If you skip the math, you can just create the grid starting with any sized square then start adding squares that are as wide as the widest side of the shape you have at that step. The first time, it’s just the same size square but after that, it keeps doubling in width.
The Fibonacci sequence and this Golden Ratio are the basis of the natural world’s primary compositional method. The most often referenced example is the nautilus shell. The interior pattern is a Golden Spiral. Its shape will curve from corner to corner in every square in the GR grid. That’s because the widening of its spiral is based on the Fibonacci sequence. Cool, right?
You can find these proportions (approximately 1.68 to 1) everywhere—in the proportion of your limbs (your upper arm to the rest of your arm, your whole arm to your body, etc.), the arrangement of flower petals, the way tree branches grow and split, even in the double helix of DNA. In other words, it’s everywhere and so we find order and comfort in it, even if we don’t recognize it consciously.
In art, focal points that land on that first tiny square turns out to be one of the most pleasing compositions to the eye. The grid can be oriented in any direction, flipped upside down or whatever. If the focal point lands there, you are pretty, well, golden!
Keep in mind that these compositional grids and standards I’m introducing are not used precisely. They are loose guides.
So, now you have two orderly, well balanced compositional arrangements you can use as go-to ideas for composition. These work best on groupings of elements like you might have on a brooch or pendant, single contained elements that will be part of something larger like the focal bead/element of a necklace, the primary view of decorative objects, and, of course, for wall art. They are also fantastic compositional arrangements for those photos you need of your art!
Try these out next time you are laying out a design, sketching, or snapping pics of your pieces. Scroll down for apps and gadgets to help you find these compositions in your designs.
Changing the Composition of Our World
I was so going to just let this post slide without any commentary on the news here in the US but I just want to add whatever unifying voice I can out there but I ended up writing a whole article about it! Since this is so not about art, I am not posting this here, but if you are at all interested in our understanding each other, perhaps my words here can be a helpful start or an additional push. Go to my Facebook page here.
In other news, I do have Grayscale Value Finders back in stock for those of you who missed out on them last time. If you pop over to the Design Tool Supplies page, you might find another gadget, a compositional tool/ViewCatcher, available if it hasn’t sold out to the Art Boxer Club members yet.
Keep in mind that Art Boxer Members get a much more in depth article, exercises, and other articles on living an artistic life in the weekly mini-mag so if you like these posts, support this blog and your artistic endeavors by joining up here.
Read MoreDo you ever get artists block? I’m not talking about times of procrastination or being afraid to start something but literally not been able think of anything to do. Does your brain ever just feel empty?
Well, this weekend, mine was, which was weird. I’m not usually at a loss for words, especially when it comes to blogging or writing articles. I usually feel like I can write about art and design nonstop and never run out of ideas. But, this weekend, I hit a bit of a wall.
What is that all about? Honestly, I think it’s about burnout and not just from my usual mad pace. I think many of us are running into burnout this year.
Burnout and blocks are often related in their causes. We all have an infinite number of ideas inside our heads all growing from our countless experiences, ever-growing knowledge, and ever present desires. So, I believe that it’s not that we don’t have ideas sometimes but rather that we are missing the keys to access them.
Without Resources
Although so many of us supposedly have all this extra time and flexibility this wacky year, we don’t always have the energy needed to navigate the constant changes, the stress, the worry, and, probably more than anything, the uncertainty while still juggling our family, jobs, and creative aspirations. Some days it’s just too much. Our well of energy goes dry.
I’m hearing this from a lot of artists. Some are wondering if they are burned out on their medium or their studio space or their creative time in general. Others are lacking motivation because there aren’t shows and fairs to give them those all-important deadlines. Still others, having lost major avenues of income with both in-person teaching and live shows on hiatus, are questioning the fragility of their chosen path.
What it comes down to is that the usual motivations that push us to create are missing. We don’t even have social engagements for which to create new pieces of jewelry for ourselves to wear or guild meetings to encourage us to complete work so we have something new to share. Many of our usual energizing motivators just simply aren’t there.
Signs of the Times
It has been noted throughout history that when there are traumatic and life-threatening circumstances within a society, such as war, famine, or major natural disasters, the people first focus on survival, initially neglecting most other pursuits. However, one of the very the first things that come back into society, once people begin to feel safe and secure, are creative pursuits. Perhaps we don’t all feel quite safe and secure yet, not feeling settled enough to bury ourselves and creative work but as the world starts to right itself, the creative urge will return. Take heart from that.
The other things very particular to this pandemic that may be making it hard to create are that we aren’t having as many novel experiences and are certainly deprived of a normal level of social stimulation. Both these things provide us with inspiration and energy to be creatively productive but they are rare commodities right now.
In other words, while the world and all the bad news is slowly but surely draining us of our day-to-day energy, our sources for renewed energy are spare to nonexistent. It’s really no wonder that so many people are feeling uninspired or burned out right now.
Filling Your Well
So, the first thing I want to say, to myself as well as you, is that it’s okay. Burnout is normal. Our creative path, and life in general, is not a smooth and even highway but more of a roller coaster. This will happen sometimes, especially in times like now.
The other thing I’d say is, rather than worry about any lack of productivity or trying to force it, do what you can to recharge your creative battery. Get out and go places and do things that you don’t normally do. Obviously, stay safe and follow all recommendations in your area, but go take a hike in a nearby forest or walk through an unfamiliar part of town or go photo hunting (a kind of self-structured scavenger hunt but you are gathering photos rather than things). Just come up with things that you can do safely but that are brand-new and interesting to you.
Getting out and doing new things will create new pathways in your brain which will, in turn, energize it and keep your mind fit and flexible. As you get older, new and novel experiences become more and more important so never lose your adventurous spirit. Those same mechanisms that help keep your brain young also keep your creativity flowing, as shown by a number of recent studies. In fact, at least one study suggests that creative thinking is boosted most after weird or even traumatic experiences. If that’s true, we should all be insanely creative when this period in world history is over! There’s another reason to take heart I suppose.
Besides novel experiences, also be sure you are getting some kind of social time in. Sure, it might have to be a zoom call but, if it can be done safely, a socially distanced backyard or front yard gathering (while we still have some weather we can sit outside in) with a handful of creative friends or family can do so much to boost your spirits and energy level.
I myself am going to heed my own advice. Next weekend we are going to take out the camper van conversion I’ve been working on and do a little van camping. That’s the other thing. Sometimes burnout or creative blocks just simply need space and time. We can try to barrel through it – and I often do just that – but sometimes we really just need to kick back and relax and let the mind “marinate” on life and our present experiences. Combine some downtime with some new experiences and, if you can swing it, some socially distanced social time, and you are sure to come back with renewed energy and inspiration.
Read MoreWhat size art do you work in? Have you even ever thought about that? Do you work small, big, or a nice moderate middle size?
I think many of us have a limited size range that we feel comfortable working in and rarely, if ever, venture outside that range. There’s nothing wrong with that but it does beg the question, do you think about what the appropriate size is when you create something?
As you might be guessing, if you’ve been reading my blog or design articles for any length of time, I’m about to point out that making the decision about the size of your work can help to fulfill your intention.
(Do you ever think, “If she says something about intention one more time…!” Well, I do hope it’s not annoying. It’s just that important!)
Size in art simply refers to how big or small something is. It is used in a variety of ways to emphasize, organize, assist in functionality, and symbolize the intention of the artist. A lot of the size choices made have to do with relativity – something can only be called small if something else is big and vice versa.
In design, this is actually a principal known as proportion and scale. Proportion is about the relative size between two or more objects or elements when they are grouped together or juxtaposed. Scale refers to how big or small something is compared to the general understanding of how a thing usually is or should be. For instance, we expect a chair to be sized for human beings to sit in and a teapot big enough to hold several cups of tea. Anything significantly larger or smaller than these expectations would be a change in scale.
Scale represents an interesting concept in that it makes note that we do have expectations about how big or small thing should be. That may sound like we have some kind of undue constraints placed upon those of us who create, but actually, scale gives us an opportunity to step outside those expectations and make a point.
As mentioned above, size can be used emphasize things. Making something bigger than expected usually draws attention, so if you created a beaded necklace with beads as big as golf balls, those are definitely beads that are bigger than normally expected.
The same concept of emphasis works with proportions. Let’s say that you only made one of those beads as big as a golf ball in the previously mentioned beaded necklace and the rest of the beads were of a more reasonable size. In that case, you would be drawing attention to the big bead as a focal point. Size allows you to direct the viewer’s eye and their impression of the work.
It may seem that bigger items will be more impressive or have a bigger impact but, honestly, very small artistic creations can be just as fascinating, sometimes more so due to the skill needed to create beauty in such a small space. I think you can see that in the opening image of this post. Small art requires the viewer to come close to it to really see the details, creating an intimacy between the viewer and the piece.
So, have you ever thought about these considerations for size when creating your work? Don’t worry if you haven’t. It’s not that uncommon for size to be determined in some arbitrary or organic manner. And I’m not saying that doing it that way is wrong, but you could be missing out on an opportunity to better express your intention if size was a conscious decision.
A Sizable Story
When I was a working artist, I often made decisions about size based on what I thought people would want. It wasn’t a particularly conscious choice, more of an aim not to make pieces too big. I was not trying to make statement jewelry, but rather something that could be comfortably worn all day, or so that was my train of thought.
I can’t say what got me to start thinking about size, but at some point, I started to ask myself why I was afraid to go big. So, I started to push myself, making big collar pieces that would sit as high as the jawline and come down to the collarbone. Some were a little crazy, some were so uncomfortable, but I still found so much joy in making all of them.
I found something freeing in pushing myself beyond what I thought my market would like. And, as it turned out, my market liked them big too. I sold every one that I put up for sale. They never came home with me after a show. So, what I discovered was that the sizes I had been working in were completely self-imposed without any supportable basis for my choices other than my own fear of not being able to make a sale.
Once I realized why I had been working in those smaller sizes, I was able to start making decisions based on what the work needed to be instead of what I thought the market might want. For example, if I was going to make an ornate piece with the intention that the wearer feel like a queen, I would probably decide that it should be big and bold, not small and delicate or demurely moderate, to better emphasize the feeling of nobility I wanted it to embody.
What’s Your Size?
So why do you work in the sizes that you do?
Is it purely functionality or rooted in the idea of what people would expect the size to be?
Is it limited by the tools or forms you have on hand, or by the capability of the materials being used?
Do you let the size come about organically or unconsciously or do you make a conscious decision about size based on the impact or response you would like the viewer to have?
I truly don’t believe that there’s really a wrong way to determine the size of your work but, like any design element, you are only truly a master of it if you are aware of its possibilities and make conscious choices.
So maybe this week, think about the size of your artwork in terms of your intention. Look at pieces that you’ve made in the past and ask yourself how the look and message, if there was one, would have changed if the piece had been smaller or larger. And in the next few things that you design, ask yourself what size piece would best serve the artwork before letting your tools or expectations of scale determine it for you.
Goodies are About Gone
If you didn’t see the newsletter yesterday, I shared the stock I have left for a few special items that were first offered to Art Boxer Club Members, but a couple things are sold out or nearly so already. These are limited items that I will periodically offer publicly, without the discounts or freebies club members get, when there is extra stock, so if you can’t join us in the club, keep your eye out for my newsletters and sign up here if you aren’t on that list for my next offering.
Getting first dibs as well as discounts and freebies is one of the advantages of being part of the Art Boxer clubs, along with the weekly mini-magazine pick me up you get in your email. (The Art Boxer Success club that includes coaching is also unavailable at this time as spots are full up but I do have a waiting list going – just write to me if interested.)
These limited supplies are available on this page if you are still interested.
All Quiet on this Western Front
I have little to report on the home front. I did go in in for a small surgery Thursday only to find out I’m going have to go back in six weeks or so from now to have it completed. Nothing is straightforward and simple this year, is it? So, just trying to make myself take it easy this weekend although I am just a horrible patient in that regard.
Next weekend, assuming nothing else weird happens, my better half and I are going to slip away for the weekend to test the camper van conversion we’ve been slowly working on. I do plan to put something for you together before I go so you should still be able to visit with me next Sunday.
In the meantime, all your hopes and plans, big or small, all go off as intended this week!
Read MoreSince we talked about tactile texture last week, it would seem logical that I would talk about visual texture this week.
But I’m not! I don’t want to be too predictable!
No, that’s not why. Actually, it’s that most of what needs to be said about visual texture has to do with the usual recommendation of choosing characteristics that fulfill your intention. If you read my blog, even sporadically, you’ve heard this before.
As long as you understand that visual texture is a purely visual variation on or within a surface (such as marbling, mokume, ikat, or any application of an ink, powder, dye or paint medium), then, as described in the post from the week before last, you can choose visual textures simply by coming up with adjectives to describe your intention and do likewise with possible visual textures and match them up based on similar adjectives. That is the core of the approach for working with visual textures.
So, that being established, I’d like to, instead, talk about another thing you’re also familiar with if you have been reading the blog for the past couple months but which we have yet to specifically associate with texture.
Creating a Relationship
Last month I talked about choosing color palettes in terms of contrast and similarities. But guess what? Combining different types of textures also plays by the same basic rules of contrasts and similarities.
Most work you create or look at probably has more than one texture. It could be a combination of smooth and rough textures or a variety of different rough textures or variations of smooth ones. You may often combine tactile texture and visual texture, as well. What these combinations all achieve is variation. Variation in texture is pretty instinctual for most creatives, as is a desire for variation in color.
The variation between textures can be heavily contrasted but, like color, it helps to have at least one similar characteristic so there is some relationship between them. With texture, you can actually use other design elements to create that relationship such as using the same or related color or a similar shape for the texture’ s space. Once you have that similarity, everything else can be contrasted.
But what about using similarities between the characteristics of the textures? For instance, you could create only rough textures but vary how that roughness is created. Or all your textures could be stippled holes but you vary the shape or size of those holes.
Just as you need similarities, you’re probably going to want variation, too, not only to create contrast, but also to create shapes, layers, and compositional direction (which we will get to later this year).
The Need for Variation
Variation, as always, adds some level of interest, energy, and complexity to your work and you can adjust how much you add of these by adjusting the variation between textures (or any design elements) – from subtle to bold or somewhere in between.
Let’s say you want to make a piece with a strong graphic look. You’ve already chosen hard edged graphic shapes and bold colors. What about the texture? You might choose a slick, glossy surface as a primary texture. Now, what other textures can be used to vary the surface but have it still related to a glossy one?
If you want to go subtle, you could stick with variations on smooth textures such as a matte or satin finish. Alternately, you can choose to rough up the surface but in a very orderly way similar to the orderliness of your graphic shapes. This can be done with a series of dense, parallel lines, or a dense but orderly mark.
As long as the marking of the surface is the only thing that changes, then all raised portions of the comparatively rougher texture will be glossy. That will give you your similar characteristic – the gloss of the smooth surface and the occasional gloss of the rough surface.
This is not to say that you can’t have textures that are completely and utterly different. The extreme contrast could be, in and of itself, a relationship. That difference will cause tension or discordance, but that could be exactly what you want.
Here are just some of the characteristics in texture that could create similarity or contrast:
- Tactile or visual
- Smooth or rough
- The quality of the finished surface (glossy, satin, matte, or chalky)
- Type of mark, technique, or tool used to create the tactile or visual texture
- Organic versus graphic styles
- Size (how much space each texture takes up)
- Direction (if the texture visually flows or moves from one part of the piece to the other)
- Shape of the space it is applied to
As you can see, other design elements can become quite intertwined with texture. Marks, lines, size, direction, and shape all can play a role in the similarity or contrast of areas of texture in your piece. It really doesn’t take much for us to see a relationship between textures. If it’s there, we’ll see or sense it and the design will feel more cohesive for it being there.
Since that texture relationship can be, and often is, developed through other design elements we work with, this is not always something you need to be wholly conscious of. But, if something in your work is not looking right, check for the relationship between your textures as well as your colors and other elements.
And, if next time you are looking at your work and feel like it needs some contrast in its tactile or visual texture, just look at the dominant texture that you have and, using it as a starting point, choose possible other textures or design options that will create at least one similar characteristic, still provide contrast at the level that makes sense for you piece, and has characteristics that recall the theme of your work.
Last Days for Club Discounted Forever Pricing
3 days left to join the Devotee or Success clubs at the FOREVER discount price so you can get first dibs on limited stock offers, discounts, and goodie box giveaways, all while getting a mid-week mini-mag of brief articles to keep your creative energy and ideas going. And right now you can also get in on it with a 2 week free trial! .
So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club 0r buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.
Visual Contrast … Out of Doors!
Packing up to take the camper van conversion for a test drive up the coast, just one night. That’s been my little side project that I’ve been getting myself lost in for an hour or so most days. It’s not completely done but good enough for one night out for my better half and me. I need some contrast between life inside this lovely home of ours and the outside and distant world! So, I am off. I hope you all are looking for new and novel things to add a bit of excitment and contrast in your lives as well!
Read More
How often do you touch art?
No, I don’t mean being the unruly museum visitor who gets yelled at by the docent, but in your everyday life, how many things do you touch that you would also consider art?
Works in the applied arts, which encompass decorative art, adornment, and functional objects, are often things that we touch. Because of this, the tactile texture of most applied art is exceedingly important. Not only can the wrong texture put someone off from buying a piece, but the right texture can make a huge difference between people liking your work due to its visual appeal and being utterly in love with it because it feels so good to touch. It is also another means by which you can express your intention.
Choosing Tactile
The first time I touched a Melanie West polymer bead, it was like taking a bite of the most heavenly chocolate mousse. Her finishes are flawless and so soft; my fingers just couldn’t get enough. That kind of tactile reaction is golden. It also supports her soft and organic themes. As wonderful as her finishes are, that kind of texture may not be wanted in your work or may not even be possible due to techniques or materials you are using.
The point is that her textures are part of the experience of her work and, if you’re creating things that will be handled, you too should consider the experience of touching your piece as part of its aesthetic value. As always, let your intention drive your decisions, but pay attention to the physical sensation experienced when handling the work and aim to have it support your intention, alongside all your other design decisions.
For instance, if you want to share your love of the beach through your work, think about the physical sensations that stand out the most – the soft breeze on your face, the refreshingly cold water on your feet, and your toes digging into cool sand. Now, how do you translate those physical sensations into tactile texture that will help you share that experience to those who will handle your work?
You can do so by thinking in terms of those adjectives – soft, refreshing, and cool. You probably want those to be the dominant sensations so don’t go for, say, a sandy texture just because the beach has sand. Is a gritty, sandy texture going to convey soft, refreshing, and cool? Chances are, it’s just going to remind someone of getting sand in their shoes and other uncomfortable places. You can create a visually sandy texture that includes sandy colors and a speckled look, but in terms of tactile sensations, going for a soft, maybe matte surface that will feel cool and soothing to the touch will share something closer to the sensations you want to relay.
There are a lot of materials that have limits on the tactile textures available. Polymer clay can replicate most tactile surfaces except for fuzzy, but felted work is limited to that dense and slightly rough feel of matted wool while glass will almost always have a smooth aspect. There are also techniques that create their own texture or limit how you can further manipulate the material to create texture. Learn the range of tactile sensations available in the materials and techniques you use so you know what options you have.
Work that Begs to Be Touched
There are a couple things you can focus on in order to create work that people will love to touch. It primarily involves smoothness and variation.
Smooth Surfaces
Our sense of touch enjoys traveling along a pleasantly smooth substance such as polished metal or stone. But what we like most is softness, such as a fluffy blanket or bunny fur. Softness is a type of smoothness as it allows our skin to glide across, unimpeded.
Note that you can re-create the look of fluffy and furry textures in hard substances such as clay or wood but you can’t re-create the same associated softness because, in those materials, you lose the ability for our fingertips to effortlessly glide across it in the same way due to the unevenness in a hard surface. So, recreating the look of fur doesn’t necessarily re-create the tactile experience. The ‘look’ of fur is just a visual experience.
So, be careful to think of smooth tactile texture, not in the way it looks, but the way it feels.
Variation
Our fingertips were made for receiving information, and lots of it, so they do very much enjoy a variation in texture. However, we don’t normally enjoy variation that is sharp, prickly, scratchy, or sticky. These textures make it hard for our fingers to glide along and take it in, not to mention that they are also often painful.
However, bumps, grooves, and fine lines excite the nerve endings. It’s just like the sense of taste – we aren’t too happy with things that are bland but a lot of flavors that go well together thrills our tongue. Our fingers, likewise, enjoy complexity.
The Best of Both – Smooth and Varied
I think you’ll find that pieces with both a smooth and varied surface attain the pinnacle of touchableness.
Take a look at the pearled bracelet here. It is not even in your presence and you probably still feel a tiny urge to reach out and touch it. That’s because each half pearl has a small, smooth surface which is further aided by the round and unimpeded nature of its shape as well as there being a varied field of them.
The combination of smoothness and variation in this bracelet makes for an engaging texture, adding energy to the piece both in its tactile and visual nature. Note that this also has a bit of rough texture around the edges to provides textural contrast. Because contrast is important in texture too!
The contrast of texture fit well into my intention of showing the classic perfection and allure of pearls in an organic setting. I wanted it to be a subtle reminder of the messy world pearls actually come from even though we now associate them with neat, tidy, and conservative dress.
The Tactile Balancing Act
The textures you choose will dictate limitations in terms of surface treatments and other parts of your design, so you have to balance out your tactile texture choices with your other design choices. For instance, if you create a deep and dense texture on a light color, it’s going to appear darker, which you might not want. Or you may want a very smooth surface but want pattern to raise the energy so you would have to figure out how to incorporate pattern visually with inks, veneers, or other smooth surface applications.It just needs to make sense for your intention and the limitations of material.
If your tactile texture decisions, weighed in light of all the other decisions you have to make about color, shape line, function, etc., are chosen in service of your intention, you are sure to have a beautiful, cohesive, and interestingly touchable design.
Should I Call Them Mini-Mags?
The first week of the Art Boxer Clubs has commenced and one of the first comments about the weekly Pick-Me-Up is that it ought to be described as a mini-mag. I guess it is. It’s hard to take the magazine attitude out of me. There were 5 little articles and a good handful of links for further exploring. So, yeah, maybe it is a mini-mag. I might have to rethink what I call it.
But regardless of what it’s called, joining the club will get you a little extra boost each week and at least once a month, you’ll get a special discount, a first dibs or limited stock offer, and/or a giveaway. And right now you can get in on it with a 2 week free trial and a FOREVER discounted rate.
So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club (there are only a few spots left in this upgrade to personal coaching option, at least as of my writing this), or buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.
No Fires Here
We are still a safe distance from all the fires and the sky has started to clear up from the smoke so nothing too exciting to report from Tenth Muse central. I’ve already gotten started on the next project but I don’t want to say too much about it. It seems like every time I say something, I get jinxed and delayed. So, you’ll just have to stop by and check in with me on the weekends, or read the newsletters, or, if you want to be the first to know, join one of the new Club options as Art Boxers will be the first to know (as well as getting extra discounts … just sayin’.)
I hope you all have a relatively unexciting week yourselves. It’s not like we need much more excitement with the craziness of the world providing plenty already. Just go make beautiful things and be kind and caring to each other.
Read More