Fall arrives tomorrow … The Polymer Arts that is!
September 6, 2016
Inspirational Art, The Polymer Arts magazine news
Tomorrow, September 7th, the Fall 2016 issue of the The Polymer Arts will be arriving in Email inboxes (check spam folders if owed a digital copy and it doesn’t show up by midday US time) and should start arriving in mail boxes in some West coast US areas as well. It is also the day I get to see it in my anxious little hands! Release day is both exciting and nerve-wracking. I am always so anxious to know if we’ve done well for The Polymer Arts readers. You are more than welcome to let me know what you think if you have the chance–good or bad. I appreciate all comments.
In the meantime, we’ll get started on the Fall issue blog kick off just a day early. This is the week or two we look at work that we couldn’t quite squeeze into the upcoming issue due to how packed the issues get.
This craziness you see here is just one of them and although I not over the moon about this piece, I have to say it was a huge surprise to see it come to life on my own work table. I had sat down to create a polymer mandala as part of our article vetting process–when myself or someone on the team follows a tutorial article’s instructions to see if they make sense–and the article on Mandalas by Anke Humpert was one I was personally anxious to try. In truth, we had collectively worked through a lot of what was going into this as we went gallivanting through France. But what I had not quite realized was how focused it would be on the intuition and meditation aspects of creating these. So in trying not to judge what I might be doing on my mandala, one late night I just went at it for a couple of hours. This is what I found on my work table the next morning.
I wanted to share this because for one, I think making these takes a bit of bravery to do just want comes to mind. So whereas the mandala created in the tutorial is pretty controlled, I just let go and kind of macerated the clay sheet. The thing is, whether you want to do some orderly or want to scratch spontaneously at the clay, a polymer mandala allows you to do whatever you like and allows your personal creativity to just flow through you. Just tell yourself that no one has to see it and create absolutely whatever comes to mind.
I had to say I absolutely loved the process. I got so lost in it and it felt so odd coming out of the session, like the real world was surreal. It did feel like coming out of meditation except I had something exciting to show for it. If you want to try your hand at this, I suggest you open up the article on mandala making in the Fall issue that comes out tomorrow, give it one read through so you understand the basic process–Anke shows you how to lay out a base grid to get you started and then makes suggestions for various ways to approach it. Then get to it and let yourself go.
Inspirational Challenge of the Day: Create a mandala, of course. If you don’t have the article, just roll a sheet of clay and start ‘doodling’ on it, making whatever tool marks you like, adding cane slices or sculpting pieces to attach. Just let yourself go.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Simply Curves and a Free month of Christi
September 3, 2016
Inspirational Art
When it comes to simple, I think this necklace is the most breathtaking piece I found this past week, maybe ever. The lines are gentle and subtle, but the way the two elements perfectly curve in on each other like a gentle and caring embrace is just amazing. I don’t even see the unique wire design really, as the slow back and forth winding of the edges are so engrossing. Maybe it’s just me but I find this so masterful, there really isn’t too much else to say but … wow.
This is not polymer, in case you were wondering, but this is the kind of thing polymer could achieve. The piece is bamboo created by Tomomi Matsunaga who was creating jewelry in the 1990s and 2000s in Kyoto, Japan but other than that, I have no information about the artist. This is a bit odd being I can find Tomomi referenced in items on my shelf like Ornament magazine and Lark’s 500 Necklaces. I don’t know what has become of the artist but the work is well appreciated as shown by the many, many Pinterest pins (with links going nowhere unfortunately). To see more, put Tomomi Matsunaga into a Google image search along with ‘bamboo’ or ‘jewelry’ to bring up other simple but intensely graceful pieces, most also created from bamboo.
While you are online looking for more of this masterful work, do take a look at what Christi Friesen is up to. Christi is passionate about art, polymer clay, mixed media, fabulous products, and techniques. She shares her ideas as well as the things she discovers by other artists on her exclusive membership site, “Christi’s Neighborhood” which, for people like you, she is opening up for free for the month of September. You can click here and log in using the following information. It could be the very thing you need to kick off your Fall!
Login: VIP, Password: CLEARLY2016
Inspirational Challenge of the Day: It’s a holiday weekend in the US so the ‘challenge’ is to relax and enjoy friends and family, if you can. Let design ideas marinate while you take in the sunshine and surround yourself with fun and laughter. Then go into the studio next week and see what fresh ideas come out of the time off.
**Also note, you may not be able to comment for a couple days. We were spam attacked the last couple days and shut down comments while we wait for the comment sharks to swim elsewhere. But if you want to chime in now, write me by replying to this if you get it in email or write us at connect(‘at sign’)thepolymerarts.com
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Treasured Clay
September 1, 2016
Inspirational Art
We have all had those pieces of our own work, or those of others, where there is this one portion you find yourself completely in love with. Many times it is a texture or part of the treated clay, maybe in the background, sometimes the focal point, and usually surrounded by other components or distracting elements. Doesn’t it seem like a shame that you can’t just point at it and say to the rest of the world, “See how beautiful this is?”
Well, in a way you can and this is another advantage of using simple or subdued designs. You can use simple backgrounds, framing or nothing else but a well-formed shape to present those textures or effects you are in love with, letting them shine on their own, in all their obvious glory.
This is how Jagna Birecka commonly designs her art jewelry, letting the shapes or simple, clean base elements be the platform to showcase her wonderful mokume veneers. This pendant here is a perfect example. The square this little slice of mokume sits on is finished smoothly and cleanly so as to not distract from the mokume pattern. Using purple to create a strong color contrast makes the slice glow and just a little shaping to give the veneer dimension makes it feel more substantial. With this design, we don’t question that the mokume is being presented like a ‘gem’ rather than just some interesting visual texture.
If you have not seen and enjoyed Jagna’s work before, jump over to the gallery pages on her website and note the many other ways she shows off her technique, making the clay shine like the treasured material it is.
Inspirational Challenge of the Day: Dig out a treasured veneer, cane, or already cured element you have tossed in the “I don’t know what to do with this but it’s too cool to throw away” pile, or create a sheet in your favorite technique then design a simple background or base to show it off on. It can also be adhered to a vase, box, or book cover as a simple focal element. Where or how would your bit of treasured clay really shine?
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Keeping it Subdued; Fall Issue coming September 7th
August 30, 2016
Inspirational Art
We have finally gotten everything through and files approved for the Fall issue and it’s now in the printing presses over in Idaho. Spending so much time reading, writing and editing on a particular subject gets my mind almost obsessed with it. I had already started exploring simple design in my own work this year but now I’m really focused on it. That and mandalas since the Mandala article really got me intrigued. But more of that week after next when the issue comes out. We’ll have all issues in the mail and the digital edition in your inbox on September 7th, so not long now! Get your order or renewal in before that date to be sure you are one of the first kids on your block to get this truly amazing collection of tutorials and thought-provoking articles.
In the meantime, I have collected some nice designs where simple or subdued works particularly well. Simplicity in design is really a matter of relativity. Is it simple compared to what the artist usually does, simple for the kind of technique it is, or is it a very simple form compared to what most artists create? To illustrate this, I thought I’d pull out some of the better subdued designs I’ve found. These are simple on some level but aren’t basic or boring.
Bettina Welker’s pin here is a calm and subdued piece compared to much of what she produces although she is no stranger to simplicity. With a focus on the effect of translucency, she has added only what she needs to keep interest and focus. The white stripes give the translucence a reference for the depth of layers and something to peer in towards while those red dots give us a focal point. And that is all it needs.
Bettina’s designs are always beautifully thought out and are a definite source of reference for anyone who likes work with a graphics inspired edge. Go get inspired by her simple and involved work on her website and get her tutorials and classes on Etsy and Craft Art Edu.
Inspirational Challenge of the Day: Take a technique you really enjoy and try to minimize what you do with it. For instance, if you make kaleidoscope canes with six sides, try three or four or reduce the number of paths or colors in your design. If you create colored surfaces with alcohol inks, use just one instead of three. Take a look at the effect and determine a design that will work with the less complex version. Add focus if you need but try to keep it simple and see what you come up with.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners.
_________________________________________
Happy Bugs
August 27, 2016
Inspirational Art
Here is another pretty and much less creepy insect to admire this week, as well as being one you can create for yourself with Stephanie Kilgast‘s instructions in this great video tutorial. Part caning, part sculptural, this tutorial actually has a lot of great ideas for all kinds of claying enthusiasts whether you like creepy crawlers or not.
Stephanie actually has quite a thing for happy bugs. In fact she has a whole line of them and other bug making video tutorials as well. Here is what she says about her Happy Bugs project:
“The happy bugs projects comes from a desire to sculpt happiness and not always focus on the desperate state of the world … I need that fresh breeze of joy and you might too. Happy because laughing makes us kinder too and bugs because insects are a treasure of beauty, colors and textures.”
I completely agree with her sentiment! Find more on bugs, food, and hybrid plant-animals on her colorful and quite happy website.
Inspirational Challenge of the Day: Just create something that makes you happy. Let this be a happiness filled weekend.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Blingy Bugs
August 24, 2016
Inspirational Art
So I finally found out what the crazy, giant, alien looking thing was hopping down the trail after me and my big black German Shepard the other day. It’s called a Tarantula Hawk although it’s a type of wasp and not a bird. I found a few images and one absolutely horrifying video of it trying to take down a tarantula even bigger than itself (and these things are already 2 inches /50mm long or more!) I’ve not seen a horror movie quite so scary since Halloween! These giant wasps are definitely the thing of nightmares, maybe more for tarantulas, but their sting is logged as the most painful sting/bite in the world next only to that of a bullet ant. One person said it felt like they were being struck by lighting for 3 long minutes straight. Yikes!
In any case, I am still freaking out over the things so the goal today was to find a pretty version of such a creature and I totally have it here with Christi Friesen’s Jeweled Insect. The creature I saw was seriously about the same size and had a similar body type but I am much more enamored of this one. I imagine many of us would be!
This insect is part of a journey Christi is on (and not the kind where strange insects start chasing you down the trail!) She and I are in similar places with realizing how little we do art for ourselves, being entrenched in the creative businesses we have. She and I have had some long talks about this as well as with others and have made recent re-commitments to our studio time. She got a jump on this much earlier than I (I’m still working it out) and created a number of things like this blingy bug created last month. You should read her blog post about her thoughts on this studio commitment idea and how it might apply to you on her blog here.
She is also teaching this as a project in Brisbane next week although I heard it was sold out. However, she may very well teach it again so keep an eye on Christi’s class announcements on this page and through her email ‘blathers’.
Inspirational Challenge of the Day: Create a piece that is just for you, that you have no intention of selling or maybe even showing to anyone else. Create without worry or inhibition and enjoy the process, giving yourself no limitations.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Beautiful Bugs
August 22, 2016
Inspirational Art
Ok, so you know what is on my mind this week? Bugs! First something nipped on me several nights in a row while I slept then later this past week these brilliant green bugs keep popping up in one of the bathrooms (turned out to be stink bugs … yuck!), then I was chased down a desert trail I regularly run by the biggest and strangest hopping beetle/mosquito looking thing the other day. Now, I am not a squeamish girl and I actually really like bugs–they are amazing creatures–but I’ve nearly had enough. So to resurrect my love of bugs, let’s do beautiful bugs this week. We’ll see what I can find.
Joyce Fritz came to mind first, of course. I have been admiring her bugs since nearly day one of my polymer inspired existence. I remember reading an interview about her use of recycled telephone wire for the legs to make appendages as colorful as the clay canes most of her bugs are built from. I thought that was so clever. The antennae and other parts are made from wire and beads. She sells almost exclusively through wholesaling which means she makes a LOT of bugs, and yet they all look so fun and inspired. I love that this one has an entire landscape scene on its back, perhaps carrying an image of its ‘native’ environment. That would be a very interesting bug to find while out on a trail.
While I go looking for more beautiful bugs, enjoy a little gallery showing of Joyce’s work on her website.
Inspirational Challenge of the Day: Create a more appealing version of something you tend to find ugly in nature. Bugs, snakes, fungus, weeds … just come up with something you regular try to avoid and see if you can’t create a beautiful version of it or let it inspire form, color, texture or motifs for a new piece.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Simple Sterling DIY
August 20, 2016
Inspirational Art
To encourage further play with metal and polymer, I dug up a very easy tutorial for you that requires no significant metal working skills. Gloria Fort has step by step instructions for creating a fun, modern necklace with nothing more than polymer and metal rings. Easy peasy and quite appealing, you can choose your own color palette and use any kind of metal rings or findings you have on hand. Even large metal aluminum washers will work for this design.
If you don’t have anything on hand or want to create your own interesting shapes, just pull out some thick wire and create open metal forms by wrapping the wire around sturdy items such as tool handles or interesting parts of kitchen utensils. Or form them by hand. I would recommend you give your wire forms a good tap all the way around with a rubber tipped hammer to harden the wire so you can press the clay in and on it without deforming it. Don’t have a rubber tipped hammer? Then just lay the wire forms between layers of leather or heavy felt and use a nail hammer with a moderately gentle touch.
Or just go at it with the nail hammer to flatten the wire. Be aware, however, that the wire will spread and change the form including probably opening the point where you expect the wire to meet. Bending flattened wire is difficult if not impossible. A little overlapping (or a lot if you like!) can guarantee a continuous metal band and a touch of epoxy, if you don’t solder, can be used to hold the ends together. But play around! That’s what this week has been all about!
Gloria has tons of mixed media tutorials on her website so if you want tips and ideas on polymer mixed media or even something completely different, browse her site for all kinds of ideas.
Inspirational Challenge of the Day: You guessed it … try the tutorial or create your own version of the metal layered onto polymer. But mostly, this weekend, just play!
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
Sculpting Metals
August 18, 2016
Inspirational Art
If you haven’t yet heard, the range of precious metal clays available has expanded tremendously over the last handful of years, even into the availability of not so precious metals including copper, bronze, and even steel. What this means is that experimenting with these art clays can be done without the huge investment that the cost of silver necessitated back when that and the insanely priced gold clays were the only options. There are just such tremendous possibilities to expand your designs and the value of your pieces.
Art clays do require some specialized materials but nothing terribly expensive and there are versions of all these metal clays that can be fired with a hand torch so you don’t even need a jewelry kiln. Although who would object to acquiring one if, say, a kindly significant other or family member should want to bestow one on you? If you don’t get into it, they can always be re-sold. I try never to miss out on the opportunity to see if another material might light up my creative passion, although I do prefer it not break the bank in the process.
In any case, you can start by making simple components such as these disks sandwiched with a pretty polymer bead created by Anna Fidecka, who primarily works in metal clays as you’ll see on her Flickr photostream. Once you get how the clay works and are confident of your honed firing skills, you can move onto making your own bezels, bails, backings and beads for your polymer components, creating work that allows you a more complete mode of expression versus buying pre-made metal components. Also, $5 in beautifully wrought copper clay could allow you to increase the price of a pendant by $25 or more over making the same components in polymer and that kind of margin is nothing to sneeze at. There are also durability and detail options you’d have with metal clays not available with polymer.
Ready to give it a try? You can find all sorts of introductory videos online or just pick up your copy of the Spring 2016 issue of The Polymer Arts to find a beautifully detailed tutorial on creating in metal clay by Dawn Stubitsch, with tips and notes you just won’t get in those YouTube videos. It will give you a very clear idea of whether you are ready to dive in as well as showing you just how easy it can be. Then hop on over to our advertising partner Fire Mountain Gems where they will sell you a complete kit for less than $90 with literally everything you need including a torch and the metal clay to get you started. Then you can return to buy and try other metal clay when you find yourself addicted to it!
Inspirational Challenge of the Day: Give metal clays a chance. Or at least read the article or read more about it online. If you’ve already tried metal clays, try a type you have not used before to compare properties and possibilities.
_________________________________________
Like this blog? Lend your support with a purchase of The Polymer Arts magazine and visit our partners:
_________________________________________
First, my apologies for being absent the last few weekends. I kept thinking I’d be able to post something, but my days have been exhausting.
The roller coaster of the last month, not to mention the last year and a half, has really brought into perspective the concept of self-care. Balancing responsibilities with care for yourself as well as for others can be a tricky thing but, it’s not unlike art—if the composition can’t achieve some sort of balance, not much else is going to work.
So, I’ve been hashing out some ideas that will allow me to keep chatting with you as well as do what I need to do for my family and with my creative projects. I am hoping that will all be settled this coming week and we can have a little chat about that next weekend.
Persistent Ideas
In the meantime, let me share a thought by a fellow polymer artist, Adam Thomas Rees. He posted this intriguing piece, seen above, on Facebook last month, saying:
This was my first hybrid sculpture mixing metal and clay. I’d had this idea floating around in my head for about 10 years before I finally went for it. If you have an idea you’ve been sitting on, it might be time to go for it!
I have to agree. The first of the two novels I’m working on was also started a decade ago, maybe more. It can take some time to get around to it but, if an idea sticks with you, I think it’s a sign that you should really try it out!
What have you always thought about doing but haven’t tried yet? It can be very invigorating to take on something brand new and challenging.
Annual Damage Sale!
Grab Imperfect Publications for as little as $3.98 or Perfects & Supplies for 30% off
So, it’s that time! I’m cleaning out the mailing room and collecting all the publications with a dinged corner or a little shelf wear and am putting all these perfectly readable publications up for purchase at 50%-60% OFF the list price.
- Print Magazines: 3.98 each
- Print books: $5-$12 each.
Half of the imperfect issues will sell out day one if tradition holds so don’t wait!
This only happens once every year or so and once they are sold, the great deals are — whoosh –outta here!
Go here to grab up these steals before they’re gone.
Need Something Else?
Get new PRINT items and design tools for 30% off! So, if you can’t round out your collection of TMA publications with an imperfect copy, you can do so with an amazing deal on a shiny new one!
PROMO CODE FOR 30% OFF : damsale21
Promo code works for any PRINT publications or Design Tools NOT already on sale on the whole of the website.
30% off sale end June 30, 2021. Not good with other discounts, coupons, or on shipping. Damage sale ends when stock is gone, which can be pretty darn quick so don’t wait!
Read More
This week, I need to beg your forgiveness as I am recycling a post from a couple years ago. There’s been a small avalanche of family emergencies — nothing life-threatening — and I need to head out to Colorado and Kansas for a couple of weeks. I’ve been unable to put something together for the blog with all the distractions, but I’ve been thinking about this idea of collections again. It seems a lot of us were doing it a bit of exploring last year, which tends to result in lots of unused bits and pieces. So, this might be a useful reminder of things you can do with those bits and bobs.
Do you have a bin or box of pieces and parts of your handiwork yet unfinished but which you are too in love with toss? If you regularly create, I can’t imagine that you don’t. But what exactly do we do with these pieces? Do we hold on to them, hoping that they will be just the thing needed someday or do we toss them?
It can be quite the dilemma, one that even Marie Kondo can’t easily help with because, hey, these do spark joy for us! We see value in them, in that they represent our creativity and what we can accomplish. But do such little jewels of our work belong in a bin where we don’t get to admire them?
I’ve been thinking about this question for a while and came up with a few solutions of my own. If you have a copy of Polymer Journeys 2019, you can see, in the very last entry, my contribution, which is a display case of small exploratory items for which I had no particular use in mind when created them. I created them without thinking, “This is going to be a pendant,” or “This is going to be a set of earrings,” or “This is going to decorate a vessel.” I just made them to see what the material would do, most of which I liked, and they all represented a little exploratory learning experience.
I had already been tying bits onto ribbons and hanging them off the edge of my studio corkboard as little festive decorations. That doesn’t work for pieces that only had one viewing angle though as they would twist around on the ribbons, so I was still in search of other options.
Then I was out talking to the butterflies in my backyard (Yeah, I talk to the creatures in my yard,) and remembering how I used to catch and collect them in shadow boxes as a kid. It just randomly struck me that my little creative bits were like butterflies. They are lovelies I caught in a moment of exploratory creativity and in that small frame of time, they became a kind of unexpected friend, going through that creative time with me. I didn’t want to toss my little friends, even though I had no end-use for them. You don’t do that to friends! You hold on to them and support each other, right?
Does that sound silly? Maybe it is, but it was revealing to me to realize that I kept certain pieces not because they were so beautiful or well done, but because I felt connected to them. So, why not collect them and put them out like a collection of butterflies or a collage of photos? What you see here is what I started making. My husband and I would find shadow boxes at garage sales and thrift stores for cheap, and I’d arrange my bits in them like compositional jigsaw puzzles. I’ve made half a dozen of these so far.
By the way, I use a hot melt glue gun to tack the pieces onto a bit of mat board cut to fit the box. The nice thing about the hot melt glue is that if you do every want to take a piece out of the collection, you warm the back of the mat board with heat gun or hair dryer for a couple seconds and pop them right off. So, your “friends” can come out and play in another piece or a new collection if you like!
As I shared in the previous version of this blog in 2019, people have also used old collectibles display boxes to show off small sculptural pieces or heavy pieces of fabric to pin or hook jewelry pieces as a means of display as well. Look around at how you are other people put together collectibles for ideas about how you might display your polymer bits.
So, do I have your little wheels turning? These should give you ideas not just for what to do with your extra bits, but many of these could be a jumping-off point for creating your own unique show displays and photo setups.
Do you have a cool and unique way to display your extra bits or jewelry? Send me links to images if you do. Put it in the comments below, or if you’re reading this by email, click the header for this post to get to it online to leave a comment.
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More
Libby Mills’ Mod Flowers are her latest challenges. Take a look at her Instagram page and all that she’s been doing over the last couple of years, including process and studio pics.
How adverse are you to hard work and challenges?
Recognizing your ability to face the challenges and incredible effort that goes into creating original artwork can be a necessary, if somewhat painful, bit of self-assessment. Most of us find ourselves on one or the other extremes—either we give up too soon, not doing the work or finding shortcuts that don’t help us grow, or we don’t give up even when the process becomes pointless or detrimental.
Are you one or the other, or are you somewhere in the middle? Or does it depend on the type of work or challenge?
The Easy Way
Trying to find an easy way around hard work and difficult challenges is probably a bit more common. If we’re all being honest, there’s few of us who have never used a tutorial or ideas from artwork we’ve seen to develop our own pieces. That’s okay. I’m not saying that it’s bad or wrong—taking inspiration from other people’s design is one way we learn. However, if you don’t get past that stage, you are missing out on some of the most joyful work you’ll ever experience.
Using other people’s instructions or ideas allows you to create something without putting your creative self or your ego at too much risk. However, it’s taking chances and doing the hard work that makes the successes so exceptionally sweet. By going out on a limb and creating purely from your own inspiration can result in one of the most joyful feelings I think a human being can have. Seriously. There is nothing like hard earned success in your creative work to put you on Cloud 9.
Now why do we feel that way about our own artwork? Well, for one, the work is born of our ideas, experiences, and loves. But more so, it’s because of the struggles we went through either to learn the skills that allowed us to make the art and/or the hard work and time we put into its creation. When it’s done, your talent, your spirit, and your perseverance become a concrete thing that you can revel in and share.
In one of my writer’s group, a friend of mine asked why every story has to have conflict. The answer is that story IS conflict. Can you imagine watching a movie where the hero of the story had everything happen just the way they wanted it to? If Harry Potter just flicked his wand and make Voldemort go away, or Hamlet didn’t care that his father was killed, why would we watch those shows? Do you gossip about the good things that happen to people or the difficulties people are having?
Now, think about how satisfying it is when Harry vanquishes his nemesis and Hamlet finally avenges his father. Those moments are so immensely satisfying to us because of what we went through with the characters to get there. And that is true of anything we want to attain as well. The more conflict and struggle we face, the more satisfying it is when we accomplish or gain what we are after.
There’s actually science behind this. Researchers have studied everything from job positions to winning the lottery and they have found that when people are simply given something without having to work for it, not only does any elation from the acquisition die quickly but people are far less fulfilled and, sometimes, even become depressed. However, when people struggle to get promoted or have wealth because of years of hard work, they are not only happier, but they are also more motivated to keep at it than those that were simply given those things.
So, when you’re in the studio, don’t be frustrated or shy away from challenges. When you find them, think, “This is my chance to achieve something wonderful and fulfilling.” If you presently lean on the ideas of others, challenge yourself to create from your own designs as much as possible if not completely. Take risks. Push yourself just past the point of being comfortable. Do the hard work and see if you don’t find it more than worthwhile.
The Other End of the Spectrum
Now, if you’re one of those that doesn’t give up when you should, or you don’t give yourself the time off when you should, learn to take more breaks both physically and from the work you’re struggling with. It often helps to put a difficult piece away for a little while. Pull it out a few days or a few weeks later and you can see whether it is still worth working on. If it is, you’ll probably see a solution you didn’t see before.
Just don’t be afraid to set aside a piece that is going nowhere. Don’t feel you have to try finishing something because you put a lot of time into it. None of your time spent is wasted. Everything you do helps you learn and hone your skills.
Me, I’m of this sort. A dog with a bone, as they say. I look at every challenge as a battle to be won, and I don’t know the meaning of surrender. It’s rather ridiculous sometimes. I also don’t stop working when I should either, which is why I keep hurting myself.
Scaling Back on the Blog for a Bit
For those of you that were not with me for the Great Elbow Drama of 2019, I developed an advanced form of tendinitis in my right arm and can no longer type with it for any length of time. Well, now I have an overused left arm after too much research for my novel and too much gardening. *Sigh*
So, this post, and probably the next few, will be primarily chatting rather than deep dives into design concepts as I’m limited to using my speech to text software while my arm (hopefully) heals. Searching for a selection of great art images to go with what I’m writing about requires too much mousing I’m afraid. I hope you’ll stick with me though. I’ll aim for a mix of “Life As an Artist” articles like this one and design refresh posts that need only one image for the time being.
In the meantime, for those of you who can, get to the studio, give yourselves some reasonable challenges, and enjoy the fruits of your labors.
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More
This glass vase by Robert Coby is broken up into a rough but simple composition of thirds.
Composition is really an intriguing design aspect. It is how everything comes together because it is the structure of it. It’s the bones upon which all your elements and principles are placed. It’s a functional concept and an all-encompassing one.
The structure of our compositions use a number of anchoring concepts, all rooted in design principles. We could learn the principles first but since they are less concrete than the elements you have been learning, I think an overview of the possible compositional structures will allow you to immediately see how the principles of design we’ll get into later can play out in a composition. But in order to talk composition I need to at least touch upon a few of the principles.
Last week, I started your compositional knowledge with a brief discussion of focal points. As we dig into new compositional concepts this week, remember that focal points will be either an element we are strongly drawn to, will have tremendous contrast, will be a place where elements converge, a place where an element is isolated, or will simply strike us as unusual. In other words, they stand out more than anything else when taking in the whole piece.
So, that was a first introduction to that principle. Here are a couple more.
Hierarchy
In your piece there will be elements that stand out more than others and ones that are barely noticed. The one that stands out the most, as you are sure to surmise, should be your focal point or points but after those, all the other pieces will likely be vying for attention in a visual hierarchy. That order creates a perceived perception of each element’s importance.
Rebecca Thickbroom’s necklace elements almost always take up separate spaces with little or no overlapping. It makes them feel presented, like they are part of a story. She is also fond of including negative space beween parts in her designs which, with jewelry, make the body or clothes of the wearer part of the overall landscape of the piece. There is also a definite hierarchy of elements. Where does your eye goes first? Where does it go after that? And after that? Do you see how this hierarchy moves your view around the piece so it feels full and cohesive?
You can determine what elements are more important than others by giving them more space, making them bigger, having them high contrast, setting them where line or shapes converge, giving them a lot of energy through color, marks, lines, etc.
Hierarchy, knowing which items are most important, is needed for most standard compositional arrangements as their placement can be successfully arranged based on them.
Space
When we talk about space, we talk about positive and negative space. Positive space is usually the action, the focal point, or an area of primary interest. The negative space is usually a background or an area where the viewer can rest from analyzing the more active areas. It’s also all the empty space around sculptural object.
Yes, these principles can get kind of complex that’s why I’m going to take these things one at a time after you get this overview.
Easy Peasy Composition- The Rule of Thirds
The Rule of Thirds provides an easy but very pleasing way to lay out your elements. It is also pretty dynamic while easily remaining balanced. Let me explain.
Imagine a tic-tac-toe grid laid over the primary view of your work, like it is in the opening image of this post. If you look at your work in terms of this 9 box grid, you end up with several choice positions for focal points and breaking up the space.
For instance, the points near where the horizontal and vertical lines intersect are great places to set a focal point as well as secondary focal points.
The grid can also be used to break up the space. If you want two background textures, instead of just splitting the “canvas” of your piece in half, you can put the stronger texture on just one third, covering 3 squares of your grid. The second texture would have more space but if not as visual strong as the other, that extra space would balance against the visual draw of the stronger texture. Again, that gives you balance.
Classic Composition – The Golden Ratio
Like the Rule of Thirds, the Golden Ratio is a kind of grid but this time, it is based on the ratio of the body and other natural occurrences—it’s a matter of proportions.
A Golden Ratio grid for composition is made up of Fibonacci squares which are a visual representation of a mathematical sequence of the same name. If you skip the math, you can just create the grid starting with any sized square then start adding squares that are as wide as the widest side of the shape you have at that step. The first time, it’s just the same size square but after that, it keeps doubling in width.
The Fibonacci sequence and this Golden Ratio are the basis of the natural world’s primary compositional method. The most often referenced example is the nautilus shell. The interior pattern is a Golden Spiral. Its shape will curve from corner to corner in every square in the GR grid. That’s because the widening of its spiral is based on the Fibonacci sequence. Cool, right?
My Ice plant brooch fits nicely in a Golden Ratio grid. I didn’t do this consciously but having studied the Golden Ratio quite a bit, it is very intuitive for me. It won’t take long for it to be intuitive for you either once you’ve worked with it a bit and start to recognize and feel the graceful balance of its compositions.
You can find these proportions (approximately 1.68 to 1) everywhere—in the proportion of your limbs (your upper arm to the rest of your arm, your whole arm to your body, etc.), the arrangement of flower petals, the way tree branches grow and split, even in the double helix of DNA. In other words, it’s everywhere and so we find order and comfort in it, even if we don’t recognize it consciously.
In art, focal points that land on that first tiny square turns out to be one of the most pleasing compositions to the eye. The grid can be oriented in any direction, flipped upside down or whatever. If the focal point lands there, you are pretty, well, golden!
Keep in mind that these compositional grids and standards I’m introducing are not used precisely. They are loose guides.
So, now you have two orderly, well balanced compositional arrangements you can use as go-to ideas for composition. These work best on groupings of elements like you might have on a brooch or pendant, single contained elements that will be part of something larger like the focal bead/element of a necklace, the primary view of decorative objects, and, of course, for wall art. They are also fantastic compositional arrangements for those photos you need of your art!
Try these out next time you are laying out a design, sketching, or snapping pics of your pieces. Scroll down for apps and gadgets to help you find these compositions in your designs.
Changing the Composition of Our World
I was so going to just let this post slide without any commentary on the news here in the US but I just want to add whatever unifying voice I can out there but I ended up writing a whole article about it! Since this is so not about art, I am not posting this here, but if you are at all interested in our understanding each other, perhaps my words here can be a helpful start or an additional push. Go to my Facebook page here.
In other news, I do have Grayscale Value Finders back in stock for those of you who missed out on them last time. If you pop over to the Design Tool Supplies page, you might find another gadget, a compositional tool/ViewCatcher, available if it hasn’t sold out to the Art Boxer Club members yet.
Keep in mind that Art Boxer Members get a much more in depth article, exercises, and other articles on living an artistic life in the weekly mini-mag so if you like these posts, support this blog and your artistic endeavors by joining up here.
Read More
Corvid sculpture from the rich imagination of Ellen Jewett. I don’t know where she draws her creative energy from, but I’d take a sip or two if she bottled it!
Do you ever get artists block? I’m not talking about times of procrastination or being afraid to start something but literally not been able think of anything to do. Does your brain ever just feel empty?
Well, this weekend, mine was, which was weird. I’m not usually at a loss for words, especially when it comes to blogging or writing articles. I usually feel like I can write about art and design nonstop and never run out of ideas. But, this weekend, I hit a bit of a wall.
What is that all about? Honestly, I think it’s about burnout and not just from my usual mad pace. I think many of us are running into burnout this year.
Burnout and blocks are often related in their causes. We all have an infinite number of ideas inside our heads all growing from our countless experiences, ever-growing knowledge, and ever present desires. So, I believe that it’s not that we don’t have ideas sometimes but rather that we are missing the keys to access them.
Without Resources
Although so many of us supposedly have all this extra time and flexibility this wacky year, we don’t always have the energy needed to navigate the constant changes, the stress, the worry, and, probably more than anything, the uncertainty while still juggling our family, jobs, and creative aspirations. Some days it’s just too much. Our well of energy goes dry.
I’m hearing this from a lot of artists. Some are wondering if they are burned out on their medium or their studio space or their creative time in general. Others are lacking motivation because there aren’t shows and fairs to give them those all-important deadlines. Still others, having lost major avenues of income with both in-person teaching and live shows on hiatus, are questioning the fragility of their chosen path.
What it comes down to is that the usual motivations that push us to create are missing. We don’t even have social engagements for which to create new pieces of jewelry for ourselves to wear or guild meetings to encourage us to complete work so we have something new to share. Many of our usual energizing motivators just simply aren’t there.
Signs of the Times
It has been noted throughout history that when there are traumatic and life-threatening circumstances within a society, such as war, famine, or major natural disasters, the people first focus on survival, initially neglecting most other pursuits. However, one of the very the first things that come back into society, once people begin to feel safe and secure, are creative pursuits. Perhaps we don’t all feel quite safe and secure yet, not feeling settled enough to bury ourselves and creative work but as the world starts to right itself, the creative urge will return. Take heart from that.
The other things very particular to this pandemic that may be making it hard to create are that we aren’t having as many novel experiences and are certainly deprived of a normal level of social stimulation. Both these things provide us with inspiration and energy to be creatively productive but they are rare commodities right now.
In other words, while the world and all the bad news is slowly but surely draining us of our day-to-day energy, our sources for renewed energy are spare to nonexistent. It’s really no wonder that so many people are feeling uninspired or burned out right now.
Filling Your Well
So, the first thing I want to say, to myself as well as you, is that it’s okay. Burnout is normal. Our creative path, and life in general, is not a smooth and even highway but more of a roller coaster. This will happen sometimes, especially in times like now.
The other thing I’d say is, rather than worry about any lack of productivity or trying to force it, do what you can to recharge your creative battery. Get out and go places and do things that you don’t normally do. Obviously, stay safe and follow all recommendations in your area, but go take a hike in a nearby forest or walk through an unfamiliar part of town or go photo hunting (a kind of self-structured scavenger hunt but you are gathering photos rather than things). Just come up with things that you can do safely but that are brand-new and interesting to you.
Getting out and doing new things will create new pathways in your brain which will, in turn, energize it and keep your mind fit and flexible. As you get older, new and novel experiences become more and more important so never lose your adventurous spirit. Those same mechanisms that help keep your brain young also keep your creativity flowing, as shown by a number of recent studies. In fact, at least one study suggests that creative thinking is boosted most after weird or even traumatic experiences. If that’s true, we should all be insanely creative when this period in world history is over! There’s another reason to take heart I suppose.
Besides novel experiences, also be sure you are getting some kind of social time in. Sure, it might have to be a zoom call but, if it can be done safely, a socially distanced backyard or front yard gathering (while we still have some weather we can sit outside in) with a handful of creative friends or family can do so much to boost your spirits and energy level.
I myself am going to heed my own advice. Next weekend we are going to take out the camper van conversion I’ve been working on and do a little van camping. That’s the other thing. Sometimes burnout or creative blocks just simply need space and time. We can try to barrel through it – and I often do just that – but sometimes we really just need to kick back and relax and let the mind “marinate” on life and our present experiences. Combine some downtime with some new experiences and, if you can swing it, some socially distanced social time, and you are sure to come back with renewed energy and inspiration.
Read More
Fanni Sandor creates exquisitely small and biologically accurate creatures in polymer clay and mixed mediums. Her choice to go small is born of a fascination with minature art and we, likewise, are fascinated by the tiny masterpieces. See more on her Instagram page.
What size art do you work in? Have you even ever thought about that? Do you work small, big, or a nice moderate middle size?
I think many of us have a limited size range that we feel comfortable working in and rarely, if ever, venture outside that range. There’s nothing wrong with that but it does beg the question, do you think about what the appropriate size is when you create something?
As you might be guessing, if you’ve been reading my blog or design articles for any length of time, I’m about to point out that making the decision about the size of your work can help to fulfill your intention.
(Do you ever think, “If she says something about intention one more time…!” Well, I do hope it’s not annoying. It’s just that important!)
Size in art simply refers to how big or small something is. It is used in a variety of ways to emphasize, organize, assist in functionality, and symbolize the intention of the artist. A lot of the size choices made have to do with relativity – something can only be called small if something else is big and vice versa.
In design, this is actually a principal known as proportion and scale. Proportion is about the relative size between two or more objects or elements when they are grouped together or juxtaposed. Scale refers to how big or small something is compared to the general understanding of how a thing usually is or should be. For instance, we expect a chair to be sized for human beings to sit in and a teapot big enough to hold several cups of tea. Anything significantly larger or smaller than these expectations would be a change in scale.
Scale represents an interesting concept in that it makes note that we do have expectations about how big or small thing should be. That may sound like we have some kind of undue constraints placed upon those of us who create, but actually, scale gives us an opportunity to step outside those expectations and make a point.
As mentioned above, size can be used emphasize things. Making something bigger than expected usually draws attention, so if you created a beaded necklace with beads as big as golf balls, those are definitely beads that are bigger than normally expected.
The same concept of emphasis works with proportions. Let’s say that you only made one of those beads as big as a golf ball in the previously mentioned beaded necklace and the rest of the beads were of a more reasonable size. In that case, you would be drawing attention to the big bead as a focal point. Size allows you to direct the viewer’s eye and their impression of the work.
It may seem that bigger items will be more impressive or have a bigger impact but, honestly, very small artistic creations can be just as fascinating, sometimes more so due to the skill needed to create beauty in such a small space. I think you can see that in the opening image of this post. Small art requires the viewer to come close to it to really see the details, creating an intimacy between the viewer and the piece.
So, have you ever thought about these considerations for size when creating your work? Don’t worry if you haven’t. It’s not that uncommon for size to be determined in some arbitrary or organic manner. And I’m not saying that doing it that way is wrong, but you could be missing out on an opportunity to better express your intention if size was a conscious decision.
A Sizable Story
One of my high corset collars with stitched copper and polymer embellishments.
When I was a working artist, I often made decisions about size based on what I thought people would want. It wasn’t a particularly conscious choice, more of an aim not to make pieces too big. I was not trying to make statement jewelry, but rather something that could be comfortably worn all day, or so that was my train of thought.
I can’t say what got me to start thinking about size, but at some point, I started to ask myself why I was afraid to go big. So, I started to push myself, making big collar pieces that would sit as high as the jawline and come down to the collarbone. Some were a little crazy, some were so uncomfortable, but I still found so much joy in making all of them.
I found something freeing in pushing myself beyond what I thought my market would like. And, as it turned out, my market liked them big too. I sold every one that I put up for sale. They never came home with me after a show. So, what I discovered was that the sizes I had been working in were completely self-imposed without any supportable basis for my choices other than my own fear of not being able to make a sale.
Once I realized why I had been working in those smaller sizes, I was able to start making decisions based on what the work needed to be instead of what I thought the market might want. For example, if I was going to make an ornate piece with the intention that the wearer feel like a queen, I would probably decide that it should be big and bold, not small and delicate or demurely moderate, to better emphasize the feeling of nobility I wanted it to embody.
Georg Dinkel works large when he is trying to make a point about our reverence for technology, like with this iPhone docking station titled IReliquary.
What’s Your Size?
So why do you work in the sizes that you do?
Is it purely functionality or rooted in the idea of what people would expect the size to be?
Is it limited by the tools or forms you have on hand, or by the capability of the materials being used?
Do you let the size come about organically or unconsciously or do you make a conscious decision about size based on the impact or response you would like the viewer to have?
I truly don’t believe that there’s really a wrong way to determine the size of your work but, like any design element, you are only truly a master of it if you are aware of its possibilities and make conscious choices.
So maybe this week, think about the size of your artwork in terms of your intention. Look at pieces that you’ve made in the past and ask yourself how the look and message, if there was one, would have changed if the piece had been smaller or larger. And in the next few things that you design, ask yourself what size piece would best serve the artwork before letting your tools or expectations of scale determine it for you.
Goodies are About Gone
Support this blog and your creative endeavors … join the club!
If you didn’t see the newsletter yesterday, I shared the stock I have left for a few special items that were first offered to Art Boxer Club Members, but a couple things are sold out or nearly so already. These are limited items that I will periodically offer publicly, without the discounts or freebies club members get, when there is extra stock, so if you can’t join us in the club, keep your eye out for my newsletters and sign up here if you aren’t on that list for my next offering.
Getting first dibs as well as discounts and freebies is one of the advantages of being part of the Art Boxer clubs, along with the weekly mini-magazine pick me up you get in your email. (The Art Boxer Success club that includes coaching is also unavailable at this time as spots are full up but I do have a waiting list going – just write to me if interested.)
These limited supplies are available on this page if you are still interested.
All Quiet on this Western Front
I have little to report on the home front. I did go in in for a small surgery Thursday only to find out I’m going have to go back in six weeks or so from now to have it completed. Nothing is straightforward and simple this year, is it? So, just trying to make myself take it easy this weekend although I am just a horrible patient in that regard.
Next weekend, assuming nothing else weird happens, my better half and I are going to slip away for the weekend to test the camper van conversion we’ve been slowly working on. I do plan to put something for you together before I go so you should still be able to visit with me next Sunday.
In the meantime, all your hopes and plans, big or small, all go off as intended this week!
Read More
Kathleen Nowak Tucci going big with not-so-precious intertubes and other disposables.
What would you say if I suggested that you create a piece and then, after you are done, remove your favorite bit? Yes, I realize the request might be physically impossible without causing complete destruction but, alternately, what if I asked you to destroy something you just spent your valuable time and effort creating?
I know you might be wondering if this is some kind of dreadful crafty torture. Why in the world would anyone ask that of you and what would be the point?
Well, this was done to me and a couple dozen other classmates back in college… twice.
The first time was in a creative writing class. We brought in a piece we had been working on all week then were asked to highlight all of our favorite lines. We passed the highlighted sheets to the person next to us and then the professor asked that we scratch out all the highlighted lines in the story we had in hand.
Of course, all us sensitive little budding Hemingways and Dickinsons sat there stunned and appalled as our pieces were read aloud without the sparkling gems that we thought would certainly reveal our genius. Strangely enough, all but one of the pieces still made sense and sometimes, the author even admitted it sounded a bit better. The point was, the professor said, that we tend to fall in love with phrases or sentences and will leave them in even when they don’t serve the piece.
The point was that without our wittiest word choices we could, in theory, make better editing decisions. In art, is it possible that we could make better design decisions if we were willing to set aside the glitzy accents we love so much or not fall back on our favorite tried-and-true textures all the time?
The second time I had a professor crush my little angsty ego was in a ceramics class after we each had done a small series of slab vessels. The professor asked us to pick up our favorite piece, bring it to the center of the room, and hold it up. We were then asked if we would be willing to drop it from a height into the trash bin that sat there. Of course, no one did it at first and he just stood there waiting until a couple brave souls let their pieces go. Then the pressure was on for the rest of us to follow. Even though I wasn’t particularly attached to the piece I had in hand, it was still so hard to drop it but I did. I seem to recall that a handful of students did refuse.
Sounds like a real jerk of a professor to ask such a thing, right? Well, I have to say that, at first, that’s what I thought but then he started to talk about preciousness. His conversation had something to do with becoming too attached to particular pieces. He wanted us to put value on our process, our growth, and learning, not on impressing him or our classmates. I think he was also looking for a way to wake us up as he had been getting frustrated with our attention span during the lecture portion of the class. Well, he sure did that.
I remember thinking about that lesson some years later, when I was better able to take it in. It made me realize that each successful piece I made was really just a step in a journey more so than an end goal unto itself. That changed the way I looked at my work. And it somehow made me braver.
I still did, and do, have favorite pieces that I cherish and will never sell, but seeing the work as steps and creation as a process rather than an investment of time in an end goal has allowed me to work a bit more freely. I have a ton of pieces that remain unfinished, and although it’s disappointing every time to come to a point where you realize it’s not going to succeed how you wanted it to, I don’t have any qualms about setting it aside. I don’t see the work as wasted because I know I’ve gained a little bit more experience and a little better understanding of the process. I’ve let go of the preciousness I used to have about everything I made.
Preciousness arises not only in our valuing our time to such an extent that we will not give up on a piece even when it’s no longer salvageable, or ignoring possible design solutions because they would eliminate our favorite part, but it also happens with the material itself.
Liz Hall creates in polymer and (a lot of) precious metal clay.
Quite a few years ago, I was itching try precious metal clay but it really wasn’t in my budget. Then I found some at a really great price and bought it. But you know what? I never even opened the packages. I just couldn’t get myself to work with this very expensive material for fear I would ruin it. But, of course, it’s rather wasted now that I’ve had it so long that is not workable. Pretty stupid, right? But we can be like that, putting value on the material and not on the process and the joy that we get from learning and creating.
Preciousness is tied into fear and failure in a lot of ways. Our idea of what we think we can do or what we think we should be able to do may be so lofty or so dear and treasured that we are afraid to try, fearing that we will make a mistake and ruin our efforts or that it will not come out as we imagine it. So, we do nothing, which is the same as ruining it, just really early on.
We may also get to a point in a piece where we love it so much that we are afraid to take the next step, a step that might spoil it, and so we set it aside, with all the best intentions to take that next step at a future time but all we’ve done is deny, or even end, the work’s potential.
I thought we’d start out this month on the concept of preciousness because it felt like a good segue into discussing October’s design theme – size.
Preciousness is one of those factors that comes into play when we decide on the size or scope of the work we will take on. Our sense of preciousness can make us hesitate to do something large or particularly complex, as we may fear that we will invest a lot of effort, time, and materials into something we are not assured will be successful.
Julie Eake’s cane mosaic portrait of actress Sophie Turner was, like most of her cane mosaic portraits, a huge undertaking. But aren’t we glad she takes those risks?
But, again, have we not already failed by not attempting it in the first place?
If we looked at everything we create as precious, all the time and effort that we put into it as well as the finished work, we would have to play it rather safe in the studio. However, art is not about playing it safe.
Art is largely about the risks you take.
If you’re not taking risks, then are you actually creating art? There’s nothing wrong in creating just for that sense of accomplishment or the high of that Zen like flow we fall into when the work is familiar and comfortable. It is more than valid to have the process of making things with your hands be the primary purpose in what you do. However, it’s the hours of exploration, the failures, the false starts, our vulnerability, the deep digging, like miners looking for gold, that makes the work that we inevitably uncover truly art.
The risks we are willing to take is the thing that is truly precious.
So, keep the concept of preciousness in your mind as we talk about size this month. Of course, we’ll talk about variation and contrast in size since that is what is primarily being referred to when speaking of it as a design element, but there are other things about size that we can take into consideration as we create, move forward, and grow as creatives.
Speaking of considerations…this week, I am going to have to take my health into consideration, so although I do plan on preparing a blog for next weekend, if it ends up being short or skipped it’s because I’m having a little surgery towards the end of the week. It’s just my esophagus and I should recover in all of two days. I have to fit in all my usual physical therapy before then though, along with all the regular weekly business tasks so it will be a full week.
Don’t worry though – all you club members will get your Midweek Mini-Mag as usual including a goodies giveaway so you can look forward to that if you signed up for one of the clubs.
If you haven’t signed up for one of the clubs yet but really appreciate the information inspiration you find in this blog, help support this project by subscribing! Get your weekly mini-mag, exclusive discounts, giveaways, and special offers along with your support. With everything you’ll get, you can also think of the club as a unique and special way to acknowledge the preciousness that is your creative self!
Read More
Evgeniya Aleksandrova has a rough texture over everything here but varies the depth and pattern of the texture as well as the color.
Since we talked about tactile texture last week, it would seem logical that I would talk about visual texture this week.
But I’m not! I don’t want to be too predictable!
No, that’s not why. Actually, it’s that most of what needs to be said about visual texture has to do with the usual recommendation of choosing characteristics that fulfill your intention. If you read my blog, even sporadically, you’ve heard this before.
As long as you understand that visual texture is a purely visual variation on or within a surface (such as marbling, mokume, ikat, or any application of an ink, powder, dye or paint medium), then, as described in the post from the week before last, you can choose visual textures simply by coming up with adjectives to describe your intention and do likewise with possible visual textures and match them up based on similar adjectives. That is the core of the approach for working with visual textures.
So, that being established, I’d like to, instead, talk about another thing you’re also familiar with if you have been reading the blog for the past couple months but which we have yet to specifically associate with texture.
Creating a Relationship
Last month I talked about choosing color palettes in terms of contrast and similarities. But guess what? Combining different types of textures also plays by the same basic rules of contrasts and similarities.
I love how Joy Kruze echoes the spots in the stone with the spots of metal in the texture created in the spaces between the metal lines of her unusual bezel
Most work you create or look at probably has more than one texture. It could be a combination of smooth and rough textures or a variety of different rough textures or variations of smooth ones. You may often combine tactile texture and visual texture, as well. What these combinations all achieve is variation. Variation in texture is pretty instinctual for most creatives, as is a desire for variation in color.
The variation between textures can be heavily contrasted but, like color, it helps to have at least one similar characteristic so there is some relationship between them. With texture, you can actually use other design elements to create that relationship such as using the same or related color or a similar shape for the texture’ s space. Once you have that similarity, everything else can be contrasted.
But what about using similarities between the characteristics of the textures? For instance, you could create only rough textures but vary how that roughness is created. Or all your textures could be stippled holes but you vary the shape or size of those holes.
Just as you need similarities, you’re probably going to want variation, too, not only to create contrast, but also to create shapes, layers, and compositional direction (which we will get to later this year).
The Need for Variation
Variation, as always, adds some level of interest, energy, and complexity to your work and you can adjust how much you add of these by adjusting the variation between textures (or any design elements) – from subtle to bold or somewhere in between.
Let’s say you want to make a piece with a strong graphic look. You’ve already chosen hard edged graphic shapes and bold colors. What about the texture? You might choose a slick, glossy surface as a primary texture. Now, what other textures can be used to vary the surface but have it still related to a glossy one?
Hélène Jeanclaude creates glossy surfaces on all parts of this necklace but between mica shift and mokume, and the contrast of colors, she creates variation and lots of energy.
If you want to go subtle, you could stick with variations on smooth textures such as a matte or satin finish. Alternately, you can choose to rough up the surface but in a very orderly way similar to the orderliness of your graphic shapes. This can be done with a series of dense, parallel lines, or a dense but orderly mark.
As long as the marking of the surface is the only thing that changes, then all raised portions of the comparatively rougher texture will be glossy. That will give you your similar characteristic – the gloss of the smooth surface and the occasional gloss of the rough surface.
This is not to say that you can’t have textures that are completely and utterly different. The extreme contrast could be, in and of itself, a relationship. That difference will cause tension or discordance, but that could be exactly what you want.
Here are just some of the characteristics in texture that could create similarity or contrast:
- Tactile or visual
- Smooth or rough
- The quality of the finished surface (glossy, satin, matte, or chalky)
- Type of mark, technique, or tool used to create the tactile or visual texture
- Organic versus graphic styles
- Size (how much space each texture takes up)
- Direction (if the texture visually flows or moves from one part of the piece to the other)
- Shape of the space it is applied to
A visual texture shows variation in density and repetition of the dots that make up this surface. Melanie Ferguson actaully etched the surface and then polished it with cold was so she has smooth tactile but rough visual texture on her surfaces.
As you can see, other design elements can become quite intertwined with texture. Marks, lines, size, direction, and shape all can play a role in the similarity or contrast of areas of texture in your piece. It really doesn’t take much for us to see a relationship between textures. If it’s there, we’ll see or sense it and the design will feel more cohesive for it being there.
Since that texture relationship can be, and often is, developed through other design elements we work with, this is not always something you need to be wholly conscious of. But, if something in your work is not looking right, check for the relationship between your textures as well as your colors and other elements.
And, if next time you are looking at your work and feel like it needs some contrast in its tactile or visual texture, just look at the dominant texture that you have and, using it as a starting point, choose possible other textures or design options that will create at least one similar characteristic, still provide contrast at the level that makes sense for you piece, and has characteristics that recall the theme of your work.
Last Days for Club Discounted Forever Pricing
3 days left to join the Devotee or Success clubs at the FOREVER discount price so you can get first dibs on limited stock offers, discounts, and goodie box giveaways, all while getting a mid-week mini-mag of brief articles to keep your creative energy and ideas going. And right now you can also get in on it with a 2 week free trial! .
So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club 0r buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.
Visual Contrast … Out of Doors!
Packing up to take the camper van conversion for a test drive up the coast, just one night. That’s been my little side project that I’ve been getting myself lost in for an hour or so most days. It’s not completely done but good enough for one night out for my better half and me. I need some contrast between life inside this lovely home of ours and the outside and distant world! So, I am off. I hope you all are looking for new and novel things to add a bit of excitment and contrast in your lives as well!
Read More
Melanie West’s satiny smooth finish has a heavanly tactile texture even though many people might think of her pieces as being textured because they’re so smooth. Yet smooth is actually one of world’s most loved textures.
How often do you touch art?
No, I don’t mean being the unruly museum visitor who gets yelled at by the docent, but in your everyday life, how many things do you touch that you would also consider art?
Works in the applied arts, which encompass decorative art, adornment, and functional objects, are often things that we touch. Because of this, the tactile texture of most applied art is exceedingly important. Not only can the wrong texture put someone off from buying a piece, but the right texture can make a huge difference between people liking your work due to its visual appeal and being utterly in love with it because it feels so good to touch. It is also another means by which you can express your intention.
Choosing Tactile
The first time I touched a Melanie West polymer bead, it was like taking a bite of the most heavenly chocolate mousse. Her finishes are flawless and so soft; my fingers just couldn’t get enough. That kind of tactile reaction is golden. It also supports her soft and organic themes. As wonderful as her finishes are, that kind of texture may not be wanted in your work or may not even be possible due to techniques or materials you are using.
The point is that her textures are part of the experience of her work and, if you’re creating things that will be handled, you too should consider the experience of touching your piece as part of its aesthetic value. As always, let your intention drive your decisions, but pay attention to the physical sensation experienced when handling the work and aim to have it support your intention, alongside all your other design decisions.
For instance, if you want to share your love of the beach through your work, think about the physical sensations that stand out the most – the soft breeze on your face, the refreshingly cold water on your feet, and your toes digging into cool sand. Now, how do you translate those physical sensations into tactile texture that will help you share that experience to those who will handle your work?
You can do so by thinking in terms of those adjectives – soft, refreshing, and cool. You probably want those to be the dominant sensations so don’t go for, say, a sandy texture just because the beach has sand. Is a gritty, sandy texture going to convey soft, refreshing, and cool? Chances are, it’s just going to remind someone of getting sand in their shoes and other uncomfortable places. You can create a visually sandy texture that includes sandy colors and a speckled look, but in terms of tactile sensations, going for a soft, maybe matte surface that will feel cool and soothing to the touch will share something closer to the sensations you want to relay.
Felt may have textural limitations but the final texture is still a choice. Olga Demyanova contrast a tight, even texture with the rippling and rougher orange edging and accents in this intriquing handbag.
There are a lot of materials that have limits on the tactile textures available. Polymer clay can replicate most tactile surfaces except for fuzzy, but felted work is limited to that dense and slightly rough feel of matted wool while glass will almost always have a smooth aspect. There are also techniques that create their own texture or limit how you can further manipulate the material to create texture. Learn the range of tactile sensations available in the materials and techniques you use so you know what options you have.
Work that Begs to Be Touched
There are a couple things you can focus on in order to create work that people will love to touch. It primarily involves smoothness and variation.
Smooth Surfaces
Our sense of touch enjoys traveling along a pleasantly smooth substance such as polished metal or stone. But what we like most is softness, such as a fluffy blanket or bunny fur. Softness is a type of smoothness as it allows our skin to glide across, unimpeded.
Note that you can re-create the look of fluffy and furry textures in hard substances such as clay or wood but you can’t re-create the same associated softness because, in those materials, you lose the ability for our fingertips to effortlessly glide across it in the same way due to the unevenness in a hard surface. So, recreating the look of fur doesn’t necessarily re-create the tactile experience. The ‘look’ of fur is just a visual experience.
So, be careful to think of smooth tactile texture, not in the way it looks, but the way it feels.
Klavdija Kurent gives the wearer of her jewelry much to explore with their fingertips.
Variation
Our fingertips were made for receiving information, and lots of it, so they do very much enjoy a variation in texture. However, we don’t normally enjoy variation that is sharp, prickly, scratchy, or sticky. These textures make it hard for our fingers to glide along and take it in, not to mention that they are also often painful.
However, bumps, grooves, and fine lines excite the nerve endings. It’s just like the sense of taste – we aren’t too happy with things that are bland but a lot of flavors that go well together thrills our tongue. Our fingers, likewise, enjoy complexity.
The Best of Both – Smooth and Varied
I think you’ll find that pieces with both a smooth and varied surface attain the pinnacle of touchableness.
Take a look at the pearled bracelet here. It is not even in your presence and you probably still feel a tiny urge to reach out and touch it. That’s because each half pearl has a small, smooth surface which is further aided by the round and unimpeded nature of its shape as well as there being a varied field of them.
The combination of smoothness and variation in this bracelet makes for an engaging texture, adding energy to the piece both in its tactile and visual nature. Note that this also has a bit of rough texture around the edges to provides textural contrast. Because contrast is important in texture too!
The contrast of texture fit well into my intention of showing the classic perfection and allure of pearls in an organic setting. I wanted it to be a subtle reminder of the messy world pearls actually come from even though we now associate them with neat, tidy, and conservative dress.
The Tactile Balancing Act
The textures you choose will dictate limitations in terms of surface treatments and other parts of your design, so you have to balance out your tactile texture choices with your other design choices. For instance, if you create a deep and dense texture on a light color, it’s going to appear darker, which you might not want. Or you may want a very smooth surface but want pattern to raise the energy so you would have to figure out how to incorporate pattern visually with inks, veneers, or other smooth surface applications.It just needs to make sense for your intention and the limitations of material.
If your tactile texture decisions, weighed in light of all the other decisions you have to make about color, shape line, function, etc., are chosen in service of your intention, you are sure to have a beautiful, cohesive, and interestingly touchable design.
Should I Call Them Mini-Mags?
The first week of the Art Boxer Clubs has commenced and one of the first comments about the weekly Pick-Me-Up is that it ought to be described as a mini-mag. I guess it is. It’s hard to take the magazine attitude out of me. There were 5 little articles and a good handful of links for further exploring. So, yeah, maybe it is a mini-mag. I might have to rethink what I call it.
But regardless of what it’s called, joining the club will get you a little extra boost each week and at least once a month, you’ll get a special discount, a first dibs or limited stock offer, and/or a giveaway. And right now you can get in on it with a 2 week free trial and a FOREVER discounted rate.
So, if you enjoy my blog, support this while boosting your own creative endeavors by joining us in the Devotee Club or Success Club (there are only a few spots left in this upgrade to personal coaching option, at least as of my writing this), or buy yourself a good book or an inspiring magazine to curl up with. Just visit the website by clicking here.
No Fires Here
We are still a safe distance from all the fires and the sky has started to clear up from the smoke so nothing too exciting to report from Tenth Muse central. I’ve already gotten started on the next project but I don’t want to say too much about it. It seems like every time I say something, I get jinxed and delayed. So, you’ll just have to stop by and check in with me on the weekends, or read the newsletters, or, if you want to be the first to know, join one of the new Club options as Art Boxers will be the first to know (as well as getting extra discounts … just sayin’.)
I hope you all have a relatively unexciting week yourselves. It’s not like we need much more excitement with the craziness of the world providing plenty already. Just go make beautiful things and be kind and caring to each other.
Read More