Curling a Bouquet
April 10, 2013 Inspirational Art
As complex as I like to work, I do so enjoy beautiful little things borne of simplicity. Katerina Kubova looks to spend a fair amount of time carefully curling small, bright colorful bits of clay and gathering them into simple but beautiful little bouquets.
Simple designs may seem to make creating a nice piece easier but in fact the simplicity makes getting it done well all the more important. With the complexity and dazzle of a more intricate design or treatment of the clay, the workmanship, color choices, and form will stand out. If you want to work simple, you must do it very, very well. That is why pieces like this work. There is obvious care and consideration and that is what makes them noteworthy.
Reading Weather in the Swirls
April 9, 2013 Inspirational Art
For me, swirls and curls represent, more than anything, the liveliness of Mother Nature, especially the drama of changing weather which is very much the theme here for us today in Colorado.
I grew up in Los Angeles where I think they pay Mother Nature to stay away as much as possible. Here at the foot of the Rocky Mountains we get all kinds of weather, often several wide variations in the same week if not in the same day. Yesterday it was warm enough for shorts and sunbathing but by evening we were getting blizzard warnings. It can be rather exciting and amazing to see clouds spilling over the mountain peaks in billowing curls, the swirl of leaves and dust on the sidewalks as the storm builds then the twisting fall of the snow as it comes down. Quite inspiring I have to say.
This piece of Daniela D’Uva‘s (same piece, four views) also reminds me of the power of weather. It could be seen as the icy blue of a harsh winter wind or the swirling pools on the side of a rushing river.
The repetition of the curling lines, echoed in the winding wire creates nonstop movement, the motion becoming an element of repetition unto itself. The near saving grace here, that which might keep us from being overwhelmed, are the three almost too small beads of blue. A touch larger or with more contrast and the beads would provide a solid resting point for the eye. I’m not saying it needs that, not if Daniela wants us to feel a little overwhelmed and lost here. It is certainly matching the crazy weather outside my window today.
Daniela is quite the master of polymer and wire work as well as completing some of the most interesting ‘back sides’ in polymer jewelry. If you’re stuck inside or just want a break from work, take a minute or two to look over the gorgeous work on her Flickr pages.
Obsession with Curls and Swirls
April 8, 2013 Inspirational Art
One of the ways I manage to keep up with blogging daily is to keep a list of links to interesting art I find in my many forays down the internet highway as well as those sent by staff and readers. I noticed today as I looked over some options that my list consisted heavily of pieces with curls and swirls and spiraling things. We even had a couple curly things last week. It got me to thinking … what is it about the curly swirlies that we like so much? Okay, yes, I may have a penchant for them but the links that I have include work sent from others and come from what I run across just randomly. So what is it?
Well, from a design standpoint, curls, swirls and things that spiral to a center make for very strong focal points. These elements are made up of directional lines that take you from an outside point into a center or a more tightly wound end point of the line. Your eye can’t help but follow these lines from outside to inside or to the end point. Even when grouped in multiples where they may make up a pattern rather than draw your eye to a primary focal position, the feeling that each curl is trying to draw your attention makes for a very dynamic visual.
I’m thinking I’ll take the next few days to ponder several variations of this element from what I have on my list. Today let’s take a look at the spiral lentil … haven’t we all made one or a hundred (or at least contemplated making them?) And have you ever meet a skillfully made swirl lentil you didn’t like? It would be hard to speak of swirl lentils and not bring up our community’s master swirler, Laura Timmins. I’ll let her provide the example of a wonderfully dynamic grouping of swirls in this very organic necklace.
That brings to mind another reason we may be so drawn to the encircling elements … they are so very common in nature. From curling vines to swirling tornadoes to winding tentacles to nautilus shells to the whorls of our fingerprints … these lines are familiar and present all around us. And we will always be drawn to the comfort of the things we recognize as familiar.
But back to polymer … if you’ve not attempted a swirl lentil before or have had limited success, you may want to check out this very clear tutorial by Desiree McCrorey. Her instruction and tips could have you making any number of these beauties below in no time.
The Journey of The Broken Telephone
April 6, 2013 Inspirational Art, Polymer community news
For those of you who followed the blogging I did from Synergy, you may remember Dan Cormier’s Broken Telephone Project. We couldn’t reveal much then because Dan and partner Tracy were going to roll out the series on The Cutting Edge Facebook page and who was I to spoil the surprise.
Well Dan has now revealed all the beautiful brooches, their creators and his thoughts on the project and related subjects. The conversation he’s started on his wrap-up post (posted on both Facebook and Flickr) is very important and I would encourage you all to take a minute to read it.
While there, take a look at all the gorgeous pieces that came out of the project.
I was lucky enough to get a close-up look of each of these brooches as I helped pin them on Tracy who became a walking exhibition on the last night of Synergy 3. I’ve held back photos of this unique exhibit until the roll-out was complete. Tracy was easily the best adorned lady of the evening!
Outside Inspiration: Diminutive in Nature
April 5, 2013 Inspirational Art
For many of us, nature is the ultimate inspiration. The forms, textures, and colors we see when outdoors provides endless ideas. But there is more inspiration in nature than meets the eye.
Meet Rob Kesseler. Rob has a serious fascination with nature but he doesn’t stop at just what is before him. He zooms in with his camera and on his computer to find the smallest of elements from which to draw inspiration for his varied art work. Here we have a commonly feared and dreaded inhabitant of the outdoors … pollen. But how gorgeous it is up close and no where near one’s respiratory system.
Rob actually works in a wide range of materials from photography to ceramics and a myriad of things in between. From his website: “… his most recent work reflects current desires to exploit the benefits for collaboration between artists and scientists. Over the past decade he has worked extensively with botanical scientists at Kew exploring the creative potential of microscopic plant material.” Now that’s getting close up and personal! It’s also very intriguing to see how he transforms what he sees into various types of art work. Peruse his site here.
With the changing of the seasons, we have a lot of opportunity to observe some very intricate and beautiful transformations. Head out with a camera fitted with a macro lens or go old-fashioned and just take a strong magnifying glass and a sketch book and spend an afternoon inspiration hunting in the great but tiny side of the outdoors.
Pushing the Switchplate
April 4, 2013 Inspirational Art
I have never been very fond of hand-decorated switch plates, not because I have anything against switch plates but because, unfortunately, they aren’t usually created with any real consideration. The switch plate is a blank canvas that so much could be done with yet most covered switch plates have no composition, focal points, lines of movement, balance of elements, or anything else that would make them art rather than just simple decor. I think the covered switch plate has to date been a lost opportunity.
Here however we have a clayer that has played with the open canvas much more than is usualy seen. Florida’s Tammy Baker works with multiple elements rather than cover the plate with a continuous pattern and even breaks out of the switch plate’s boundaries.
This is the direction I would love to see decorative polymer arts head. Mind you, there is room for improvement here, in the composition primarily. Where does your eye continuously go when looking at this? The bottom right? There are two ‘pointing’ elements on this piece–the wrist of the hand and the upper left corner element–that direct you down and right but unfortunately, the heavy grouping in the bottom right doesn’t have any significance or order and doesn’t have any additional directional elements to move the viewer further around the piece. This makes the pieces seem a bit chaotic. However, the colors and mix of textures are rich and pleasing, and the hand breaking the upper border, and thus the orderly confines of the canvas, helps to balance the chaos of the interior elements some.
Tammy’s other switch plates (you can see them on her Etsy site) also play with the broader possibilities of having this wide open canvas. Some work, some could use further consideration but regardless, she’s exploring the possibilities and that, more than anything, is what differentiates an artist from a crafter.
Swirling Color
April 3, 2013 Inspirational Art
Being brave with color can be a bit frightful. When do know if you’ve gone too far? I think the trick with bold color is to not hold back. If you’re going to go bold, go all the way.
Here is such an example. Randee Ketzel has no fear of color. Take a close look at her color choices here. Three bright, warm colors and then just one soft, cool color. Why does the powder blue work here? Well, it creates a dynamic contrast against all the warm, bright tones. A very brave choice indeed.
Randee experiments quite a bit with color as well as techniques. You can check out here experiments and resulting work on her Flickr page as well as grab yourself some of her tutorials on her Etsy shop.
Revisiting the Masters
April 2, 2013 Inspirational Art, Polymer issues, Ponderings
In a recent conversation with a couple rather big names in our community, I was asked why the community’s major blogs don’t feature the masters very often. It gave me pause. The thing is, I think we do … but part of it may be that there can be a difference in opinion as to what constitutes a master. But really what it comes down to is why we do these blogs. I know my reason is to bring inspiring ideas to you, things that will get you running into the studio or thinking about how to challenge yourself or tips that might help resolve a design issue. This requires a lot of new work and new ideas. The people we might call masters have perfected a set of techniques and/or approaches to design that most of us have become familiar with, so there is a question as to whether a reader will be very enthused by a post on something they’ve seen before. But what this question did make me consider is what we can get out of revisiting the masters.
We can become so familiar with some things that we just can’t see what there is to learn from it any more. The first time I saw Jeffrey Lloyd Dever’s work was years ago in Art Jewelry magazine. I was floored by his technique and finish (still am actually!) and tried out the tutorial in those pages. I wasn’t very successful but I did learn quite a few things along the way about back-filling and finishing. The thing is, if I worked through that same tutorial now, I would learn something different. What I was able to glean from my exploration of his work then, is not what I would glean from it now. Jeff was at Synergy and had a gallery table of his work so I was able to see his pieces close up. This time it was the color choices that I pondered. That didn’t even cross my mind years ago when I was so focused on technique.
You can see by the detail of his Racine Art Museum installation why his colors might be just a tad intriguing. But is that what intrigues you? Maybe, maybe not. It all depends on where you are in your art and even where your thoughts are on this day.
The point is, we should keep revisiting the masters, even the same pieces. The best work does not have just one thing to teach us or for us to take away. Really wonderful art will have many facets that will hit us differently at various points in our lives. So, I’ve been thinking … I should make a point here and there of revisiting even the most familiar work on this blog, give us a chance to get reacquainted with it and find what is new and exciting for us because of where we are as a community today. I’d love to hear that many of you are or will do the same. If you have any great discoveries in doing this, do let me know. We can share it here.
By the way, I pulled this image of Jeff’s work from the Polymer Art Archive which is also a treasure of a source for work from our past as well as our present. It is well worth reading and visiting on a regular basis.
What party is this? The latest project from little ol’ me, Sage. The Sage Arts podcast is more than up and running… I have 25 episodes up as of this posting, ready on your favorite podcast player (New to Podcasts? Click here to find out how easy it is to enjoy them!) and a new one coming out every week.
What’s This Podcast All About?
This podcast is all about feeding and exciting your muse. By enlightening or reminding you about important and maybe unconsidered aspects of creating and living as an artist, I hope to help you find more joy and satisfaction in what you do, sharing ways to create with authenticity and fearlessness, while supporting your uniquely defined version of success.
Now what the heck does that all mean? Well, let’s look at what this is and what this is not…
It IS…
… a way to consistently feed your muse
… all about you. Myself, my guests, and my guest co-hosts speak to the issues, curiousity, and hurdles that you as a creative deal with on a regular basis.
… focused on creating a more fulfilling, joyful, and meaningful artistic journey.
… a conversation that goes both ways with lots of opportunities for you to be heard.
It is NOT…
… all about polymer clay or any one medium, as it’s important stuff for all artistic folks.
… focused on “how-to” or the latest tools and materials.
… just interviewing successful artists and talking at you. Rather it is like a coffee house chat or other friendly gather and I include you, the listener, in every way I can.
I created this podcast to supercharge your creativity, motivation, and artistic style through novelty, story, conversation, and community. Everyone has how-tos and ways to increase your sales – valiant and necessary stuff, of course! But what does your muse need? What does your work and your love of your art need to thrive? That’s where I want to help.
I aim to give artists ways to further hone their unique voice, increase their joy and productivity, and create a version of artistic success that is meaningful, satisfying, and anything but ordinary.
Come Join the Conversation
If you have something to share, would like to be a guest (for a chatty interview), or be a guest co-host (you and I banter on a particular subject) drop me an email me via my contact page on the show website: https://thesagearts.com/contact/ or send a voice mail (use the red button on that same site, bottom right corner of any page.)
And join me on social media!
Instagram https://www.instagram.com/thesageartspodcast/
Facebook https://www.facebook.com/TheSageArtsPodcast
And don’t forget to click “FOLLOW” or that little arrow on your favorite Podcast player so you get notices of new episodes. New Episodes come out weekly on Friday evenings, barring natural disasters or other bits of interference, of course. I hope you’ll join me there, on The Sage Arts podcast!
There are new artists and creatives joining every day with tons of great things to say…
“Just what I needed!”
“I just binged-listened … and I can’t wait for more!”
“There is so much validity in your presentation…”
“Looking forward to all the thinking and creating that they prompt.”
Taste test on my RSS website: https://rss.com/podcasts/thesagearts/
Or on the podcast home website: https://thesagearts.com/
Or start with this episode:
Read MoreFirst, my apologies for being absent the last few weekends. I kept thinking I’d be able to post something, but my days have been exhausting.
The roller coaster of the last month, not to mention the last year and a half, has really brought into perspective the concept of self-care. Balancing responsibilities with care for yourself as well as for others can be a tricky thing but, it’s not unlike art—if the composition can’t achieve some sort of balance, not much else is going to work.
So, I’ve been hashing out some ideas that will allow me to keep chatting with you as well as do what I need to do for my family and with my creative projects. I am hoping that will all be settled this coming week and we can have a little chat about that next weekend.
Persistent Ideas
In the meantime, let me share a thought by a fellow polymer artist, Adam Thomas Rees. He posted this intriguing piece, seen above, on Facebook last month, saying:
This was my first hybrid sculpture mixing metal and clay. I’d had this idea floating around in my head for about 10 years before I finally went for it. If you have an idea you’ve been sitting on, it might be time to go for it!
I have to agree. The first of the two novels I’m working on was also started a decade ago, maybe more. It can take some time to get around to it but, if an idea sticks with you, I think it’s a sign that you should really try it out!
What have you always thought about doing but haven’t tried yet? It can be very invigorating to take on something brand new and challenging.
Annual Damage Sale!
Grab Imperfect Publications for as little as $3.98 or Perfects & Supplies for 30% off
So, it’s that time! I’m cleaning out the mailing room and collecting all the publications with a dinged corner or a little shelf wear and am putting all these perfectly readable publications up for purchase at 50%-60% OFF the list price.
- Print Magazines: 3.98 each
- Print books: $5-$12 each.
Half of the imperfect issues will sell out day one if tradition holds so don’t wait!
This only happens once every year or so and once they are sold, the great deals are — whoosh –outta here!
Go here to grab up these steals before they’re gone.
Need Something Else?
Get new PRINT items and design tools for 30% off! So, if you can’t round out your collection of TMA publications with an imperfect copy, you can do so with an amazing deal on a shiny new one!
PROMO CODE FOR 30% OFF : damsale21
Promo code works for any PRINT publications or Design Tools NOT already on sale on the whole of the website.
30% off sale end June 30, 2021. Not good with other discounts, coupons, or on shipping. Damage sale ends when stock is gone, which can be pretty darn quick so don’t wait!
Read MoreTo all my fabulous readers: I apologize for not having a post last week and for the lack of much of one this week as well. I am overwhelmed and exhausted as the first half of this month has been a rough one.
Still struggling with the loss of our brother-in-law and childhood friend to cancer last year, we found out last week that my baby sister is now also faced with a cancer diagnosis although the doctors are fairly positive about her prognosis. On top of this, my mother’s situation is deteriorating more rapidly although she is hanging on and literally every other member of my immediate family is dealing with some trauma or fresh tragedy aside from the bad news we’ve gotten. I spent the last two weeks in Colorado and Kansas just trying to be there for everybody. I’m back in California now but then, today, my cat, who we also found out had a large tumor just a couple weeks ago, passed away today. I wasn’t ready for that. We thought she had months, not weeks.
So, today’s image is a lesson in contrast. I’ve actually posted and blogged about this image before because I love the quote so much. The quote speaks to the same concept as yin and yang, that balance is found in the interconnectedness of opposites, that all light needs dark and dark needs light in order to be understood and appreciated.
In design that’s the concept of contrast. Dark colors make light colors seem lighter and vice versa. Rough textures emphasize the evenness of smooth textures and vice versa. The more contrast you have, the more the opposite characteristics of your colors, textures, shapes, forms, etc. stand out.
As you might have surmised, this photo is of the cat I lost today, the incomparable Cleo. She was not even a week old when we rescued each other—she was to be sent to a pound to be destroyed and I was being destroyed by depression. I was just trying to do the right thing for the innocent creature, but didn’t realize how she would change my view of my own life through the act of helping her and receiving so much love in return.
Being allergic to cats, I had planned to find her a home when she was well and old enough, but she crept into my heart. She was the friendliest and most empathetic cat I’ve known, but she also didn’t put up with any crap and ruled the dogs. And, honestly, the humans too. In like fashion, she decided not to put up with this tumor crap and left us on her own terms.
So, of course, I’m sad—heartbroken to be truthful. But it was such a wonder and privilege to have that little creature in my life that I am as grateful as I am sorrowful. And, maybe, it’s not until we feel the absence of those souls that touch us that we fully understand and appreciate the importance of their presence. That’s the contrast we find in life and death and in so much of our own lives, a contrast which we can express in our own art.
I would like to say that I will be able to continue with my posts as usual as of next week but I am honestly not sure how the rest of this month is going to go. If nothing else happens and my sister’s doctors continue to bring us hopeful news, I think I should be able to continue writing posts each weekend, but if I miss one, know that I will be back and am thinking of you.
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More
What kind of things do you do when you have had a really bad day or week or month? Sometimes we can be helped just by looking for the beauty in the world. That has been my solace this week.
It’s just been a rough week for me and my family and I’ve heard a few too many stories from friends who are having a hard time as well. It’s almost like 2020 hasn’t ended quite yet. So, when I sat down to work on this blog, all I wanted to do was find something to feed my spirit. As a result, I decided to look through images of artwork I’ve collected and find pieces that I find particularly beautiful.
The necklace here, by Kaelin Cordis, is the piece I decided to post as a representation of my idea of beauty. No, it’s not polymer but, as you know if you been with me a while, I don’t think, as a polymer artist, we should just look at polymer. There is so much inspirational artwork in all types of mediums that can spark ideas for us as well as help us understand and appreciate different types of beauty.
I don’t know that anyone’s been able to identify why some people find one thing beautiful and others find the same thing dull but I find it very interesting that each of us can be mesmerized by a beauty that only some of us see. For instance, although I think most people will be able to see beauty in this piece, I am certain that a lot of you would’ve chosen pieces to epitomize beauty that are much different than this. So, what is it in the pieces that we choose that defines our idea of beauty?
To me, the beauty in this piece is in the movement created through the use of lines and edges. I am also drawn to simplicity and although this isn’t a super simple piece, it is not complex, certainly not in terms of color. Accented only by the blue stone, the particularly white silver reins in the energy from the movement with its absence of color, conveying a calm and grace that I find entrancing.
When I think about the artwork that I have always been drawn to, the principle of movement in the form of curvilinear lines and shapes is almost always present. I think there is also a dominance of limited color palettes. Although it was not difficult for me to come up with that conclusion, I’m not sure I really recognized the root of my aesthetics before writing this just now. It’s interesting what we can learn about ourselves when asked just the right questions.
So, do you know what primarily defines beauty for you? If that’s not something you have defined for yourself, consider looking around and see if you can find the elements, principles, or compositions that you are most drawn to. Not only will it give you the opportunity to exercise your design knowledge, but you may find that spending time with beauty will refresh your mind and spirit as well.
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More
This week, I need to beg your forgiveness as I am recycling a post from a couple years ago. There’s been a small avalanche of family emergencies — nothing life-threatening — and I need to head out to Colorado and Kansas for a couple of weeks. I’ve been unable to put something together for the blog with all the distractions, but I’ve been thinking about this idea of collections again. It seems a lot of us were doing it a bit of exploring last year, which tends to result in lots of unused bits and pieces. So, this might be a useful reminder of things you can do with those bits and bobs.
Do you have a bin or box of pieces and parts of your handiwork yet unfinished but which you are too in love with toss? If you regularly create, I can’t imagine that you don’t. But what exactly do we do with these pieces? Do we hold on to them, hoping that they will be just the thing needed someday or do we toss them?
It can be quite the dilemma, one that even Marie Kondo can’t easily help with because, hey, these do spark joy for us! We see value in them, in that they represent our creativity and what we can accomplish. But do such little jewels of our work belong in a bin where we don’t get to admire them?
I’ve been thinking about this question for a while and came up with a few solutions of my own. If you have a copy of Polymer Journeys 2019, you can see, in the very last entry, my contribution, which is a display case of small exploratory items for which I had no particular use in mind when created them. I created them without thinking, “This is going to be a pendant,” or “This is going to be a set of earrings,” or “This is going to decorate a vessel.” I just made them to see what the material would do, most of which I liked, and they all represented a little exploratory learning experience.
I had already been tying bits onto ribbons and hanging them off the edge of my studio corkboard as little festive decorations. That doesn’t work for pieces that only had one viewing angle though as they would twist around on the ribbons, so I was still in search of other options.
Then I was out talking to the butterflies in my backyard (Yeah, I talk to the creatures in my yard,) and remembering how I used to catch and collect them in shadow boxes as a kid. It just randomly struck me that my little creative bits were like butterflies. They are lovelies I caught in a moment of exploratory creativity and in that small frame of time, they became a kind of unexpected friend, going through that creative time with me. I didn’t want to toss my little friends, even though I had no end-use for them. You don’t do that to friends! You hold on to them and support each other, right?
Does that sound silly? Maybe it is, but it was revealing to me to realize that I kept certain pieces not because they were so beautiful or well done, but because I felt connected to them. So, why not collect them and put them out like a collection of butterflies or a collage of photos? What you see here is what I started making. My husband and I would find shadow boxes at garage sales and thrift stores for cheap, and I’d arrange my bits in them like compositional jigsaw puzzles. I’ve made half a dozen of these so far.
By the way, I use a hot melt glue gun to tack the pieces onto a bit of mat board cut to fit the box. The nice thing about the hot melt glue is that if you do every want to take a piece out of the collection, you warm the back of the mat board with heat gun or hair dryer for a couple seconds and pop them right off. So, your “friends” can come out and play in another piece or a new collection if you like!
As I shared in the previous version of this blog in 2019, people have also used old collectibles display boxes to show off small sculptural pieces or heavy pieces of fabric to pin or hook jewelry pieces as a means of display as well. Look around at how you are other people put together collectibles for ideas about how you might display your polymer bits.
So, do I have your little wheels turning? These should give you ideas not just for what to do with your extra bits, but many of these could be a jumping-off point for creating your own unique show displays and photo setups.
Do you have a cool and unique way to display your extra bits or jewelry? Send me links to images if you do. Put it in the comments below, or if you’re reading this by email, click the header for this post to get to it online to leave a comment.
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More
How adverse are you to hard work and challenges?
Recognizing your ability to face the challenges and incredible effort that goes into creating original artwork can be a necessary, if somewhat painful, bit of self-assessment. Most of us find ourselves on one or the other extremes—either we give up too soon, not doing the work or finding shortcuts that don’t help us grow, or we don’t give up even when the process becomes pointless or detrimental.
Are you one or the other, or are you somewhere in the middle? Or does it depend on the type of work or challenge?
The Easy Way
Trying to find an easy way around hard work and difficult challenges is probably a bit more common. If we’re all being honest, there’s few of us who have never used a tutorial or ideas from artwork we’ve seen to develop our own pieces. That’s okay. I’m not saying that it’s bad or wrong—taking inspiration from other people’s design is one way we learn. However, if you don’t get past that stage, you are missing out on some of the most joyful work you’ll ever experience.
Using other people’s instructions or ideas allows you to create something without putting your creative self or your ego at too much risk. However, it’s taking chances and doing the hard work that makes the successes so exceptionally sweet. By going out on a limb and creating purely from your own inspiration can result in one of the most joyful feelings I think a human being can have. Seriously. There is nothing like hard earned success in your creative work to put you on Cloud 9.
Now why do we feel that way about our own artwork? Well, for one, the work is born of our ideas, experiences, and loves. But more so, it’s because of the struggles we went through either to learn the skills that allowed us to make the art and/or the hard work and time we put into its creation. When it’s done, your talent, your spirit, and your perseverance become a concrete thing that you can revel in and share.
In one of my writer’s group, a friend of mine asked why every story has to have conflict. The answer is that story IS conflict. Can you imagine watching a movie where the hero of the story had everything happen just the way they wanted it to? If Harry Potter just flicked his wand and make Voldemort go away, or Hamlet didn’t care that his father was killed, why would we watch those shows? Do you gossip about the good things that happen to people or the difficulties people are having?
Now, think about how satisfying it is when Harry vanquishes his nemesis and Hamlet finally avenges his father. Those moments are so immensely satisfying to us because of what we went through with the characters to get there. And that is true of anything we want to attain as well. The more conflict and struggle we face, the more satisfying it is when we accomplish or gain what we are after.
There’s actually science behind this. Researchers have studied everything from job positions to winning the lottery and they have found that when people are simply given something without having to work for it, not only does any elation from the acquisition die quickly but people are far less fulfilled and, sometimes, even become depressed. However, when people struggle to get promoted or have wealth because of years of hard work, they are not only happier, but they are also more motivated to keep at it than those that were simply given those things.
So, when you’re in the studio, don’t be frustrated or shy away from challenges. When you find them, think, “This is my chance to achieve something wonderful and fulfilling.” If you presently lean on the ideas of others, challenge yourself to create from your own designs as much as possible if not completely. Take risks. Push yourself just past the point of being comfortable. Do the hard work and see if you don’t find it more than worthwhile.
The Other End of the Spectrum
Now, if you’re one of those that doesn’t give up when you should, or you don’t give yourself the time off when you should, learn to take more breaks both physically and from the work you’re struggling with. It often helps to put a difficult piece away for a little while. Pull it out a few days or a few weeks later and you can see whether it is still worth working on. If it is, you’ll probably see a solution you didn’t see before.
Just don’t be afraid to set aside a piece that is going nowhere. Don’t feel you have to try finishing something because you put a lot of time into it. None of your time spent is wasted. Everything you do helps you learn and hone your skills.
Me, I’m of this sort. A dog with a bone, as they say. I look at every challenge as a battle to be won, and I don’t know the meaning of surrender. It’s rather ridiculous sometimes. I also don’t stop working when I should either, which is why I keep hurting myself.
Scaling Back on the Blog for a Bit
For those of you that were not with me for the Great Elbow Drama of 2019, I developed an advanced form of tendinitis in my right arm and can no longer type with it for any length of time. Well, now I have an overused left arm after too much research for my novel and too much gardening. *Sigh*
So, this post, and probably the next few, will be primarily chatting rather than deep dives into design concepts as I’m limited to using my speech to text software while my arm (hopefully) heals. Searching for a selection of great art images to go with what I’m writing about requires too much mousing I’m afraid. I hope you’ll stick with me though. I’ll aim for a mix of “Life As an Artist” articles like this one and design refresh posts that need only one image for the time being.
In the meantime, for those of you who can, get to the studio, give yourselves some reasonable challenges, and enjoy the fruits of your labors.
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More
Does the question of how big to make a piece just flummox you? When we were doing the giveaways last month, many commentors asked about size, particularly about how to determine what size to work in, It’s a great question. So, let’s go over the decision-making process for size.
If you’ve been a reader for a while, then you know this statement is inevitable: Choosing size should be based on fulfilling your intention. Sort of. Although I usually push you to consider intention in terms of your expression or creative goals, there are other factors that also play a role in this decision.
Yes, every design decision should reflect your creative intention, but size is also a consideration of construction, wearability, feasibility, and the end user’s preferences. So, I’d like to propose two general approaches to determine size—put your creativity first or put your market first. You choose what works for you.
Putting Your Creativity First
So, are you one of those that makes jewelry for giants? That’s great. There is nothing wrong with big jewelry. In fact, if you pick up any art jewelry book, you’ll notice that much of the jewelry is so huge it would be quite uncomfortable to wear for any length of time. So why is it still considered jewelry?
Big, uncomfortable art jewelry is created with the artist’s expression and ideas being dominant not the comfort of the wearer. These pieces coexist with the human form to relay a particular message. Without a body to adorn, the work would diminish in meaning or impact. So, the artist was either not concerned with its wearability or was purposely making it uncomfortable to drive home a point. That valid. And intentional. They put their creative concepts first.
What you have to say, and your process, is as important, if not more important, than the end result. I know we tend to think our studio time is about creating finished work, but is it really? Can the joy of creating be equal to, if not greater than, the value of the finished piece? If so, then your consideration for size comes down to what you need to express or create what you want.
I think if you continuously make large pieces, then that must be where your creativity wants to take you. Sure, it could be because bigger pieces can be easier to work with and you have more space to embellish and play with surface design, but what’s wrong with that? Just check that your design choices make sense with that size and your intention for the piece.
It’s true that big jewelry is not for everybody, but if that’s what you want to make, and you intend to sell it, then you need only to find the market that wants that kind of work. Look at how big those earrings are in the opening image. All her earrings are that big or bigger, and she’s sold thousands of them. She found her market and so can you.
If you make decor that is too small or too large to be functional, so what? Do you make wall pieces that are far smaller than most people would hang on a wall? I bet somebody out there would. You can also make multiples and sell them as collections to be hung together. The bottom line is, if your muse takes you there, I think you should keep exploring it.
I know we are often inclined to create work based on what the majority of people seem to prefer, but remember, you aren’t the majority of people. The majority already have a lot of choices anyway. Make what gets your heart singing.
Creating for Your Market
Now, if you create primarily to sell work and put food on the table (or to buy more materials even), you may want to consider size in terms of the wearability or usability of your pieces for the sake of your sales before, or in addition to, what your muse wants you to make.
If you make wall pieces, sculpture, or decor, your consideration of size will probably revolve around pricing since you won’t have the issue of comfort that adornment has.
For instance, if you’re inclined to make enormous pieces, you will probably need to price them higher because of material and time involved. Will your market pay those prices or can you find a market that will? If not, what can you make that still expresses your creativity but can be priced at a more acceptable level?
Whatever you do, don’t price yourself low just so you can sell it. Value yourself and your work! You can always put an expensive piece on sale if you really need to sell it. Remember, you can always discount your prices, but it is very difficult to raise them.
If you have the option, it’s often best to make smaller, reasonably priced pieces and large, impressive pieces. This way, you can draw people into your booth, online shop, or website with the large, impressive pieces while giving those with smaller budgets something of yours they can afford.
Now, I’m not saying that the size of jewelry and its pricing doesn’t have a similar consideration at times. With jewelry, it’s often as much the complexity of the work as the size that affects people’s perception of its value and how much they are willing to pay. However, a range of sizes as well as price points is a very sensible approach unless, of course, very large a very small pieces are what your signature style is about.
Overcoming Limitations
We all do it. We make our pieces based on the size dictated by our tools or materials. In some cases, it can’t be helped. There are limitations we have to work with because of physics, finances, or our studio situation. But what you do want to avoid is making size decisions based solely on what you have on hand when you could have other options.
Really, in art or any type of creativity, you should decide what you want first and then find what you need to make it happen. This is true of everything from material to tools to size.
Even if you’re not sure what you’re going to make when you sit down, you can at least determine some generalizations about whether it’s going to be a necklace or wall piece or sculpture, right?
You could also determine what you want to do with the piece when you’re done. Is it for you, a friend, family, or are you going to sell it?
If it’s for you or friends or family, what size do you or they prefer? If you’re going to sell it, and you want to take the market approach to deciding size, what does your market want or what do you need to fill in your gaps in inventory?
If you are going to let your creativity determine size, how big do you need it in order to express what you want?
Making these decisions before you start exploring can give you some direction, right? Even though you don’t know what you’re making or maybe even what techniques you want to use, size can give you a broad jumping off point.
For instance, if you want to create a small piece with hand tooled texture, delicate pin tools would work wonderfully. But if you’re making something big, you can confidently pull out a selection of bigger ball stylus tools.
If you’re thinking you would like to go bigger than any cutters you have on hand would allow, put those cutters away and hand cut your work.
If you would like to make a wall piece bigger than your 10” X 12” toaster oven space, then figure out what it will take. Use your kitchen oven with your work securely enclosed so you contain any fumes. Or buy a bigger countertop oven or a cheap used electric stove and put it on the porch or in the garage. You can also create your piece in sections and put them together after they’re cured.
You know the old adage—If there’s a will, there’s a way.
If there’s a certain size piece you want to make but polymer doesn’t seem feasible because of the amount of polymer needed or strength issues, use another material. I know, sometimes that doesn’t seem possible because of the additional skills, tools, or material costs, but consider what is possible before simply giving into the limitations of what you have and are familiar with.
So, was that the talk on size you thought you might get? I know, we could have talked about how your choices communicate different emotions or we might have discussed standard sizes for pendants or bracelets or bathroom wall pieces. But the fact is, there aren’t really standards in art, are there? We make what we need based on our muse or market. The important thing is to stop and consider the options and make a determination based on those considerations.
So, make jewelry for giants if you want or bowls too small for anything but a mouse’s meal. As long as it makes sense for you, your muse, and your market, then it’s the right size.
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More
Do you feel like you have to make a finished piece or be working on a particular design when you sit down at your studio table? Sure, it feels good, and it’s very exciting to have a finished piece to show and share, but learning a craft is as much about exploration as is about creating finished work.
So, if you’re not giving yourself that exploratory time, let me give you some reasons to highly consider it. And if you do a bit of exploring already, maybe I can offer up some new ideas about ways to use and organize your exploratory bits that you might not have tried.
The Exploratory Reasoning
When you’re fairly new to a material, technique, form, or construction method, it is to your advantage to spend time just playing with it. This is especially true, I think, of texture, mark making, color mixing, new techniques, and new materials including new brands of a familiar material. Trying to make finished work before you are familiar with the technique or material can get frustrating, if not downright depressing. You can gain more success in the long run if you develop a better understanding of what it is that you’re working and hone your skills a bit before gambling your time, materials, and hopes on finished work.
It certainly can be tempting to just pick up something and see what you can make with it right out the gate. With a lot of home craft materials, polymer clay in particular, you can create a decent completed piece within a day of picking it up. However, the ease of these materials is a bit of a deception. They may be easy to get started with, but mastering them, even just a little, takes time and effort. Give yourself a gift of that time to get to know what you’re working with without the pressure of trying to finish something presentable.
Samples to Reference
Probably the best way to explore new materials and techniques is to make small samples, ones you can keep and reference as you make decisions for future finished pieces. If the color of the sample is not relevant, you can just use scrap clay. If you use clay straight out of the package, you may also have an option to transform the samples into finished work. Let’s go over all these options.
(Although I’m going to talk specifically about polymer clay, if you work primarily in another material, consider an equivalent process. Consider how you can cut out or form small samples that can be saved as references. See if this clay focused process inspires you.)
For some orderly exploration, sheet your clay and then hand cut or punch cut the sheets into whatever shapes tickle your fancy. Then you can just go crazy with whatever you’re exploring. Use as many of these pieces as you like for each process you’re exploring. Keep the ones you are pleased with, etching with a needle tool or, after curing, writing on the back with permanent marker, what you made them with. Keep cured pieces in a baggie or punch holes in them before curing so you can string them on wire or chain, making them easy to flip through.
If you are playing with textures, mark making, or any kind of tooling on polymer clay, I would suggest sheeting three different thicknesses—the thickest setting, a medium setting, and the thinnest setting on your pasta machine. Then try out each of your experiments at least once on each of the three different thicknesses. Anything that impresses or otherwise moves around the clay will be affected differently by the clay thickness, sometimes subtly but sometimes quite dramatically.
Cure the samples you like, being sure to inscribe or write a note on the back indicating what thickness the clay sheet was along with what made the impression or marks.
If you’re color mixing, sheet the finished color, then punch out a decent sized shape, one that has enough room for you to write down your proportions for that color mix. For example, if you mix a deep rich purple by combining 6 parts cobalt, 3 parts magenta, and one part black, inscribe on the back:
6X blue
3X magenta
1X black
Also include a big initial for the brand of clay (P for Premo, F for Fimo, K for Kato, etc) since colors by the same name in one brand are usually nothing like those colors in another brand.
You can also note proportions visually by punching out a circle of clay, smaller than your mixed sample, from each of the colors you used in the mix. Cut out portions, like pie slices, from each color in proportion to how much was used in the mix to re-create a single circle showing how much of each color was used in the mix. Don’t forget to inscribe your initial for the brand of clay. See the image here for an approximate example of the purple mix above.
Adhere this combination pie to the mixed color shape, punch a hole in the sample, cure, and string on a chain or wire.
(If you are confused about how to figure out the parts aspect of the color mixing, just use a small cutter to punch your unmixed colors out of sheets of the same thickness. Each piece is a part. Use these punched bits of clay to make your mix, keeping track of how many pieces/parts you use to create the color you’re making.)
If you’re playing with a surface colorant, try it on both white clay and black clay or on clay colors you use quite often. It’s a rare colorant that doesn’t allow the clay base underneath to the show through, so trying it on black and white will give you an idea of how the colorant will appear on lighter versus darker colors, not just black and white.
I punch small-ish circles out of white and black sheets of clay, then I cut them in half and put a white half with a black half. I apply the colorant to these splits chips. After curing, I glue them to the colorant’s product container so my reference sample is right on the product. You can see here how well this works for those little mica powder containers, above. I keep them in a drawer with the samples facing up so I can quickly find the color I want.
The best part about all these samples is that while you’re designing a finished piece, you can pull them out and compare them side-by-side to see what works well together. You can also hold them up to a partially finished piece to see what you might want to add. Personally, I can’t imagine working without all my exploratory samples.
Turning Discovery into Works of Art
Now, for those of you who are anxious to produce something with your time at the studio table, you can take any samples you’re not going to save for reference and create with them. You can add additional layers, reshape, or attach embellishment to your extra samples to easily create pendants, earrings, or brooches. You can also use them for collages or mosaics.
Keep cured samples, even if you’re not going to use them for reference, for further experiments where you want to play with cured clay techniques or to test new glues or sealants. This way, not only is your time not wasted, neither are any of the materials you’re playing with.
Give Yourself Permission to Explore
Whatever your inclination, the big take-away here is that in-depth exploration can, and probably should, be a regular part of your creative process. Give yourself the permission and time to do this throughout your creative journey or career, not just when you’re starting out.
Keep in mind, not only does this kind of exploratory time hone your skills, your familiarity and confidence with the processes and techniques grow stronger and faster than they would if you tried to learn just through making finished work. This is because you are willing to take more chances with these scrap samples. They just don’t have the same stakes, right?
And, you know, taking chances with this exploratory sample work should eventually translate into taking bigger risks with your finished pieces. I think, when we take the big risks, that’s when we make the biggest leaps and create the most amazing work. Well, sometimes we make absolute disasters as well, but it’s all part of the process. You’re certainly less likely to have a disaster if you do a lot of exploration first.
So, if you have not let yourself just explore and play with the materials you work with, maybe, this week, you can either set some time aside or make all of your studio time exploration time. Making many of your mistakes in the exploratory phase and not always on completed pieces will make your creative time more efficient, less stressful, and more enjoyable.
Texture Hungry?
If you’re one of those who is looking for more ideas and direction on texture, don’t forget we have an entire issue of The Polymer Arts on texture, the Fall 2017 issue. Also check out the mark making focused edition of the Virtual Art Box from March of last year. All Virtual Art Box content that was previously members only is 40% off right now.
The Last of the March Giveaways
Our month of giveaways has ended, but all your wonderful comments have given me so many ideas for upcoming posts. I thank all of you who commented so very sincerely!
I have one last giveaway winner to announce. Valerie Hall is receiving the last batch of my giveaway Polyform clay. I was very excited about this. Valerie is a very active and giving soul who has been trying to teaching through the great clay shortage of 2020 in any way she can. So it’s fantastic to aid her with this clay package. Congrats Valerie!
This was so much fun. I will try to do this here and there as I receive samples or find opportunities to gather stuff for you. So stick around for more free stuff in the not-too-distant future!
You can support this blog by buying yourself a little something at Tenth Muse Arts or, if you like…
Read More