A Magnetic Connection

C4aOne of the tougher decisions I had to make when putting together the Summer 2015 issue was to cut part of what Helen Breil sent for her wonderful “Magnetic Design” technique tutorial. The article primarily focuses on the creation of pieces with interchangeable magnetic focal points using rare earth magnets, but she also generously added a few additional instructions, including how to create magnetic brooch clasps that work double-duty as a pendant bail, as well as being the basis for multi-pin pieces that can be set on clothing in different configurations. She had also included an easy option for creating a magnetic front closure, but she had sent so much great information that we simply couldn’t fit it all in. So here is a concise collage of the magnetic front clasp she created for us, and the photos that let you see how it is put together.

The quick run down is that you use cylindrical rare earth magnets, drill holes on each half of the clasp, ensuring the magnet positions will line up your two halves exactly where you want them to come together. Create holes just large enough to snugly fit the magnets and deep enough for them to sit flush with the edge of the clasp. (You can insert the magnet into the hole to see if fits and use another magnet to pull it out of the hole when it does go in flush as needed.) Apply cyanoacrylate gel glue to the magnets and place them back into the hole. Ensure the magnets are set in the ‘right’ direction–since magnets are directional, you don’t want them glued in leaving only ends that oppose each other, so snap the magnets together as they should be and apply the cyanoacrylate gel glue to one end, pressing it into its hole, and then grasp that side of the pendant, add glue to the still exposed magnet end and push it into the open hole. Release the magnets by sliding them apart and let the glue set. That’s it!

Helen is a wealth of information and fabulous ideas, not to mention a creator of many wonderful clay-centric products. Be sure to check out her website for her tutorials, books, silkscreens, and texture sheets, as well as take a peek or two at her Flickr photostream for more great ideas. And get your copy of the summer issue of The Polymer Arts for Helen’s entire brilliant article.

 

If you like this blog, support The Polymer Arts projects with a subscription or an issue of The Polymer Arts magazine, as well as by supporting our advertising partners.

     TPA_McGuire_blog ad    sfxpaad-diffuse

Sage

1 Comments

  1. Debbie Goodrow on June 13, 2015 at 1:43 am

    Brilliant. I love this sharing community. And I love the idea of a clasp/connector in the front. For some reason even the smallest clasps hanging on the back of my neck annoy me. Will have to try this!



If you love these posts ...