Outside Inspiration: The Humble Button Clasp
May 31, 2013
Inspirational Art
Today we’re just going to take a quick look and a well-deserved bow to a humble finding used regularly in seed bead pieces – the button style clasp. This is simply a bead or button that slips through a loop to secure it. It’s quite the popular clasp among seed bead artists for both necklaces and bracelets.
This bracelet showing a pretty typical button clasp is by Rachel of Balanced Crafts in Dublin, Ireland. This shows a button clasp that is really the central focus of the piece, one that contrasts with the even pattern of the beading, adding that focal point to bring it all together.
Here’s one more by bead artist Smadar Grossman. Looks somewhat like a toggle clasp, doesn’t it? The toggle and button clasp are essentially the same concept, only the entry point with a button clasp is a loop, and the back-up piece is the larger part of the pair.
Do these give you any good ideas? You can make the button from polymer, although you will need a cord, ribbon, or beaded loop of some sort to accomplish create this kind of clasp; but the cool thing is, the loop can be made basically invisible if the button half of the clasp is big enough. That way the button can become a focal point or a major component, without even drawing attention to its necessary function. Neat, huh?
Decorative Polymer Bails
May 30, 2013
Technique tutorials, Tips and Tricks
If there is any pre-made finding that polymer versions replace as well as, if not better, I think it would be the bail. Of course, many of us integrate polymer bails into our pendants and focal beads almost without thinking. But you can also create a stock of decorative polymer bails that can be used in combination with jump rings, or embedded in the clay as needed.
My most basic polymer bail stock had always been extruded hollow tubes in scrap clay. I would make them fairly thin-walled and bake them so I had sturdy base tubes to cover in my choice of raw clay, which I could then press onto newly created pendant pieces. Easy, quick, and made to match the pieces.
However, I have to say I was very intrigued when I found these polymer and wire combination bails created by Марина Горячих (translates as Marina Hot which may or may not be the best English translation).
Of course, I have a thing for the filigree work, but most any kind of decorative clay work would make for some interesting bails. She goes through the steps for making these bails on her LiveJournal page here – just replace or adjust the decorative filigree with your type of work. Definitely worth trying out!
Polymer-Only Linking
May 29, 2013
Inspirational Art
The one person who has probably spent more time than any other polymer artist exploring the possibilities of polymer-centric connections for jewelry is Maggie Maggio. Her architectural design background makes pondering the capabilities of a material almost inevitable.
One of her first experiments with polymer-only connections was the split ring. A roll of polymer is looped twice around and then baked to make split ring links. This process of creating a ring of polymer that can be securely looped through other rings after baking creates beads that are not only beautiful and intriguing to work with, but are also really just a ton of fun to make. This Rose Chain is one of Maggie’s expanded versions of the polymer split ring, with an additional wrap of clay and added layers to create the fabric-like ruffles.
Intrigued by the split ring idea but haven’t tried it yet? Take a couple minutes to view Maggie’s split ring video tutorial.
Maggie has also successfully created polymer hooks and jewelry that wraps around the neck or arm, so that no metal or other findings are needed. Check out her other finding-less creations on her website, and follow her adventures in polymer and color on her Smashing Color blog.
Front Side Connections
May 28, 2013
Inspirational Art
Since I brought up polymer clasps yesterday, I thought I’d talk about a variation on that type of connection: the front side toggle, and derivations of it. The connection for a necklace does not have to be at the back. If you are making a piece with a central focal bead, why not make the bead a connectors as well?
One of my favorite versions of this is the almost bolo-like polymer and filigree pieces Janet Pitcher creates for her Petal Pushers line of polymer jewelry. The focal bead is like the entry point half of a toggle; but instead of an insertion piece that will back up against the opening of the entry point, Janet creates weighted lengths of ribbons with beads created from the same petal canes as the center piece. The bead-weighted ribbons are threaded through the focal bead, and hang there as part of the design.
This is not, by far, the only option for front side connections. A really showy or beautifully done toggle type clasp can operate as a focal bead, or a large bead sliced in half with magnets in either half can be the central focus of a necklace or bead design. Just don’t relegate your beautiful connectors to the back of the necklace or bracelet if showing them off out front will make for a gorgeous piece of jewelry.
Polymer Connections in Toggle Clasps
May 27, 2013
Inspirational Art, Technique tutorials
This week I thought we’d do look at polymer fasteners – the connections and findings made from or dependent on polymer for their construction. One of the reasons I want to look into this is because of a new section in The Polymer Arts magazine called “Polymer Jeweler’s Workbench”. In this regular section we’ll be exploring techniques, ideas, and designs specific to jewelry created in polymer.
In the recently released Summer issue of The Polymer Arts, we feature combining wire findings with polymer; but one can easily create findings from polymer itself. Here is a straightforward example of polymer toggle clasp findings by Tina Holden.
The great thing about making polymer clasps is, of course, that you can make them to match the design of the piece using the same colors, textures, and motifs so the clasp becomes a integral part of the necklace or bracelet design, not just an add-on.
Tina is a very inventive and creative polymer artist. She shares many of her wonderful techniques through her tutorials which you can find on her Etsy and Artfire shops including one for the clasps you see here.
Trigger Experiences
May 26, 2013
Ponderings
I have long been a fan of Brian Eno, ever since I went to a sensory exhibit of his in Long Beach, California, back in my art school days. The huge meandering gallery space was in almost complete darkness but for these glowing, changing colors in variously constructed light boxes. His music played in the background, and you had to move about slowly because you couldn’t see that well. You could see the forms of other people, but that was it, so you weren’t distracted by any people watching or influenced by anyone else’s reaction to the work. It was ethereal, wandering through the dark space, watching these kind of light sculptures hover in the space around you. THAT was an experience, not a series of objects.
Now, I know we’re not likely to do anything quite so grand in the way our work is presented, but sometimes we can influence our work by simply thinking about how it is experienced by the person who ends up owning or viewing it: how it might relate to their life, how it would live in their home, or how it will feel to the wearer or make other people feel when they see it on that person. Our works are not just a series of objects. They are additions to our lives and the lives of those who end up with them. They can be experiences.
The Art of Subtle Variation
May 25, 2013
Inspirational Art
We’ve been talking about pushing variation all week. Pushing it usually means you are leaning towards an extreme, or at least a pretty good departure from the norm. But I wanted to correct that notion a bit. I do think swinging that pendulum to an extreme can be great for breaking through any creative barriers, but sometimes it’s the subtle changes that can really make a difference.
Little changes in your design elements can take something from still and calm to energized and exciting. I’m not say still and calm is bad, but changing the forms from what one might expect or varying them in a single piece can produce a whole new feeling in the piece.
Let’s take this piece by Judy Kuskin. This necklace has circles, rectangles and triangles in it. Sort of.
The shapes here are not, for the most part, standard or evenly shaped, except the circles and the oblong center bead. And none of the shapes match their brethren. None of the ‘rectangles’ are actually rectangles (the shape is called a quadrilateral… just a shape with four sides); instead, they are all are off-kilter, some more than others, and are hung at varying orientations. Same thing with the triangles. The circles are also different sizes, with different accent pieces in them. What Judy has done is broken our expectations. We naturally look for repetition, cohesiveness, and pattern. There isn’t any pattern here, except in a lack of repetition and consistency. This makes our eye bounce around the necklace, looking for what we expect and a place to rest. Having neither actually provides the sense of movement and energy we get from it.
This kind of full departure from expectation can be difficult to master. But as you experiment with variations in your work, you can at least take away the idea of pushing something – like a shape or the orientation of a shape – and changing it so it isn’t standard. Cut off the tip of a triangle. Slice in the sides of a square. Remove the petals in one section of a flower. Punch out the side of a circle like an eclipsing sun. Small, subtle changes like this can take a piece that you don’t find as exciting as you wanted it to be and really give it some punch.
Changes don’t need to be big and bold to make a big or bold difference. Playing with your options will help you learn what will work, and when.
Outside Inspiration: Variation in Clay
May 24, 2013
Inspirational Art
I’m sure by now you get that the key to finding variation in your work is pushing what you already know or do. You can look at other people’s art to find additional variation and inspiration to push your work. If we keep looking just at polymer though, we are limiting our potential avenues of inspiration.
Many of us look to nature for ideas because we find beauty and insight into our world there and can translate into our art–and its been a primary muse for artists for all our existence. But this can be true of many other things as well, such as other art forms. This is why I show another form of art once a week. You can’t really look at other art forms as separate from what we do with polymer. Forms, textures, colors, patterns, structure … these all can be translated from other art into polymer in some manner. When looking to vary your work or a technique, looking outside polymer is probably your best source of ideas. Truly. Other clays in particular can be so helpful because the building process is similar and we can create similar forms.
Meagan Chaney works in ceramics with a focus on movement and change so creating variation is a large part of what she does. Probably her most impressive work are her multi-part wall sculptures that climb or flow across a space. But when on her site, these small decorative domes are what caught my eye. They remind me of urchins in form and often in line but without spines. Like cultured, high class urchins in an alternate world, perhaps.
Meagan works with a limited palette here and then works out variations in texture, pattern and composition. The dome form and patterning could be directly translated into polymer although the stenciled patterns might be tricky. It can be done with polymer paste or using the Sutton slice but you could also just go for visual texture using mica shift or mokume. And of course, there’s always stamping. You can also take away just the idea for mixing up patterns on a form, or taking what you usually do on flat form and try it on similar dome forms. The idea is, if you want to work on variation, look at other work like this and think about what you like about it that you aren’t doing in your own work and then figure out how to translate it into what you do. That will push variation in your work even if you don’t end up liking the approach. Primarily what it will do is get you to work and think differently.
Take a look at Meagan’s wall sculptures and other incredible work on her website for a pleasant break in your day.
Pushing the Inchies
May 23, 2013
Inspirational Art
I mentioned inchies as an option for exploring variation a couple days ago but have been thinking maybe a brief word on breaking out of the inchie tradition of minimal variation was worth a post. If you aren’t familiar with inchies they are simply one inch square tiles of artwork. They are often made for swaps and exchanges at events, somewhat like art trading cards but tiny.
As a means for exploring variation, the use of this concept is hard to beat. Inchies give you a limited space to work in but no limitations on what you do with it. And for those of us who have limited time and resources, creating them while exploring variation means we get to build a stock of exchangeable tiny samples of our art for the next inchie exchange while pushing ourselves artistically.
Although most inchies are created to be quickly produced, don’t rush or limit your exploration of variation through inchies. Here are a few inchies by the Philippines’ Donna Cruz-Comia that obviously took some time but what wonderful results.
The consistency that makes these inchies related are that they are all petals and are built off a corner. Beyond that, that couldn’t be more different. But its this kind of work, pushing a limited idea such as the many ways one can create a petal and build the form of a flower from it that will result in new discoveries for you.
And how impressive will your inchies be at the next exchange if you created such involved work as this? Isn’t exploration wonderful?
I’m never perfectly satisfied when I send an issue of The Polymer Arts off to be printed. There is always a thing or two (or ten) that I feel could have been done better. I also know that to give into the inclination to make everything perfect would mean never getting it out the door or always be very unhappy. This is true of any artistic work. So, instead, we need to do our best in a time frame that makes it reasonable for its intended end purpose (to sell, to gift, to wear ourselves) and then let it go out into the worldto be what it will be.
A great sentiment and a colorful image quote to end our colorful week. Thank you to Paula K. Gilbert, my longest standing staffer on the magazine, for sending me this image and for always being so encouraging and enthusiastic.
Read More
I wanted to take a moment as we wind up this colorful week, to point out a simple fact about color–how you use color is just as important as what colors you choose. I feel this needs to be emphasized because with all the colorful work we’ve been looking at this week you might think you need to get more colorful or bolder. But the use of color is about how it affects the impact of your piece so you can use a lot or just a little and still have a highly impactful piece.
I think Betsy Baker fully realizes the value of color and balancing it for impact. Here is a series of pendants with barely any color visible, yet the color that is there is very dynamic visually because it is not competing with any other colors and is starkly contrasted against white.
These pendants are both calm but bold at the same time. It’s very powerful, really. So, you see it isn’t about how colorful your piece is but what you are trying to convey and how you can use color to help you make a statement or design a piece to come off just the way you intend.
Read MoreToday’s outside inspiration is quite different, not just for this blog but as a type of art work. What you see below is bourbon. No, that is not some indecipherable typo … the colors and visual texture is the result of photographing liquor under a microscope. How crazy and cool is that? These images are from BevShot, a company that photographs and sells images of favorite alcoholic beverages.
The liquor is “crystallized on a slide and shot under a polarized light microscope. As the light refracts through the beverage crystals, the resulting photos have naturally magnificent colors and composition.”
Yes, they do!
So what can we take away from this? Well, color inspiration for one, of course. Here’s nature again, being more stunning than we might imagine. You could create a dozen color palettes from the combinations here. The yellow, orange and magenta in the lower right, the yellow, magenta, purple in blue in the striations towards the top, the green, yellow and watermelon red in the center left portion … what great palettes!
There are two other things you can take from this art. One, look at the very microscopic world for some of the most amazing colors, textures and forms. Search for microscopic images and see what grabs you.
The other thing … look at this website. They have taken their beautiful imagery and transferred it onto all kinds of objects, not just wall art. As craft artists, most of us are used to creating functional items for sale but we tend to make the same kind of products. Why not stop and consider whether what you do with your jewelry can be applied to vases, boxes, swtichplates or other objects? Or what do you do with covered objects that you might be able to use to create wall art or jewelry. If you need to inject some fresh items into your line, looking at different forms using the same or adapted techniques might be just the thing.
Speaking of covered objects and wall art … the latest issue which includes extensive articles on both these subjects plus much more is off to the printer and will be getting mailed out directly from there end of next week. If you haven’t already subscribed, renewed or pre-ordered the new issue so you can get it in the first mailed batch, you can do so here at www.thepolymerarts.com/Subscribe.html The cut off date to get your orders in for the first print mailing will be end of day this Monday. The release date of the digital form of the Spring 2013 issue and the first day you might be able to expect the print issue to arrive at your door is May 22nd. So, soon. Very soon!
I found BevShot through Lindly Huanani’s website. Of course she’d have found this wonderful source of color.
Read MoreMy dear and darling friends Tracy Holmes and Dan Cormier are helping out a tired and worn out publisher this week by guest posting for me today. I wanted to write up something about their color projects for our color theme this week but Tracy graciously took the writing upon herself and Dan put together the fun image of the cubed color project they conducted for Synergy 3 (they are such incredible idea people!) So go ahead and ‘radiate’ with them …
When I invited artists to participate in a project that combined the diversity of polymer clay with the almost uncountable possible configurations of a Rubik’s Cube, I gave them a few guidelines. While each artist was welcome and encouraged to showcase their own skillset and sing in their own creative voice, this was, primarily, a project about colour. “Please,” I suggested, “Keep each of your six sides within a clearly identifiable Pentaradial Palette.”
A what?
Through this project, and through my workshop and seminars at the recent Synergy3 Conference in Atlanta in March, I introduced a new approach to colour that I’ve being playing around with; a new way to explore and understand it, in theory and practice. In my world, a ‘Pentaradial Palette’ is a group of colours that radiate from a single, central place to create a cohesive collection of related hues. Basically, it’s taking a standard ‘Colour Wheel’ colour and, rather than chasing it around in circles as one of six, moving it into the middle to become a single ‘Hub’ for the other five. Whether you start with RYB or CMY (that’s another discussion), for this discussion, can we all agree that Green is a Secondary colour? Good. So, here’s what my PC3 artists got as their ‘Pentaradial Palette’ grid guide for the Green side:
With the right recipe (concept + clay + courage), mixing custom colours is easier than you think. But having said that, if you’re not quite ready to go DIY with the CMY, there are plenty of prêt à porter spokes already on the pre-packaged polymer clay colour wheel. Starting as recommended, with the purest and simplest of Hubs, here’s what nine of my PC3 artists did with their Greens:
As a polymer clay artist and teacher, I think it’s best to work towards work that features a personal palette, rather than one that relies on colors that are right out of the package. And, as my color-courageous Cubists discovered, it’s amazing how quickly adding just a little of ‘this’ to a package of ‘that’ will shift the starting hue away from something everyone recognizes, to something that is so much more ‘palettably personal.’
So, whether you’re going Green, mellowing Yellow, seeing Red, feeling Blue, shifting Cyan or mixin’ it up with Magenta, stop spinning your wheels. Grab a color, start there … and radiate!
Follow Tracy & Dan’s color adventure on their Facebook page at: www.facebook.com/TheCuttingEdgePolymerClay
Read More
I have always found that one of the most fascinating and astonishing places to study color and find inspiration for combinations is in natural elements. Not just in the outdoors, mind you, but all things naturally formed. This may not seem like news but have you ever stopped and studied the actual combinations of color not just inherent in any single thing but even the combinations that occur naturally. Have you ever seen a rock including the tag-a-long bits like lichen, moss, rust, etc. that had clashing colors? Did you ever look at the shade of green in the leaves surrounding a colorful flower and think “That color green so doesn’t go with those flowers”?
Maybe I’m just a little odd but for years I would go on hikes or to zoos and actually try to find poor natural color combinations. I have seen a few that weren’t to my taste but by all I know of color theory, they always work. How does Mother Nature do that?
Drawing inspiration from natural color combinations is just another way to bring fresh ideas into your studio but that is also the trick … keeping it fresh. The thing is, you don’t have to be literal. You may love the autumn colors of the changing trees but that doesn’t mean you can only use those colors with leaf and tree motifs. Take the colors where they’ve never been before.
Peacock colors are extremely popular but so many of the applications are replicating the feathers as well. No need for that. Do something completely feather free. Here Chris Kapono goes wild with the peacock colors but with a very unfeathery pebble-like appearance in her Little Peacock Book Box.
Take nature’s challenge and find some natural color combinations that strike you and see what you come up with in your studio. Keep your camera at the ready … you never know when nature will bring you the perfect palette.
Read MoreThe arrangement of your color schemes can be as important as the color choices themselves. Here is an example of using two kinds of color schemes but arranging them for the most impact.
In this brilliantly colored necklace by Kristie Foss, the color scheme moves from the analogous colors purple and red to complementary colors as the deep red bleeds into its opposing color on the color wheel, a bright green. The contrast is not just in the the choice of base color but the red is also darker and leaning towards purple while the green is lighter and leaning towards purple’s opposite, yellow.
This same dramatic impact can be accomplished even when the complementary colors are not right next to each other in the piece. In this flower brooch of Kristie’s she has purple changing to a dark then light blue and then we’re hit by a contrasting yellow which takes over the center of the flow. With the broadest swathes of pure color being the yellow in the center and the purple covering the edges, the impact from the complementary colors still works and it doesn’t hurt that blue and yellow are tertiary (colors a third of the color wheel away from each other) which adds touch more impact as well.
Krisite really does love her color and creates lovely combinations. You can check out more of her work and yummy colors on her blog here.
Read MoreI thought this week, we’d just look at color. Because who here doesn’t like that? For most of us it’s such a primary part of working with polymer. How can we resist with all those gorgeous colorful blocks enticing us to create something that honors our fascination with them?
And then we condition and roll, cut and punch, form and wrestle, combine and rearrange and eventually we have this finished piece that, somehow, doesn’t quite reflect what we were after. When it comes to color, even for those of us who can often combine them intuitively, study and practice is what will bring about success in taking the designs from inside our head onto our studio tables.
There are a number of ways to study color and that, I promise, are not at all dull times. What you learn can be immediately turned into beautiful creations. These pendants by Austria’s Carina are studies in complementary and tertiary colors. Now, tell me you would have not enjoyed creating something like these?
Your own personal exploration and study of color can begin (or continue) through a number of options we have available. For polymer specific color studies, there is nothing that comes close to the depth of Lindly Huanani and Maggie Maggio’s book Polymer Clay Color Inspirations. Honestly, if there was one book I’d expect to see on every serious polymer artist’s shelf, it’s this book. It doesn’t matter where you are in your journey as a polymer artist, you will learn something new and maybe even game changing for you.
If you want a quick brush up on terms and why these concepts are important (since we’ll be talking about them all week, it might be good to refamiliarize yourself with them) you can do so on websites like this one: http://www.colormatters.com/color-and-design/basic-color-theory
I’ll also share one of my favorite color pages on all the web … this is a kind of shortcut to figuring out color combinations and it’s also a little addictive. You click on a color on the color wheel and then you can run through a range of possible color combination types. I get lost in the possibilities: http://colorschemedesigner.com/
So go play with color today, online at least if not in the studio. Getting lost in color sounds like a great way to start a week.
Read MoreI don’t think this needs explaining but most days, it needs remembering. It even applies to showing and viewing art, critiquing art and supporting our community.
I hope you all have a lovely Spring Sunday.
Read MoreGoing to stop being so serious and just enjoy some beautiful work today.
These bangles are the work of Alyson Goldberg (goes by just Alyson G.) They are hand painted and gathered silks with peridot, garnet, aquamarine and pearls tucked into the folds.
I was going to say its an unexpected combination but then I thought of beaded dresses and such. Maybe we don’t get garnets and peridot on our beaded attire much these days but it’s not unheard of. Pearls on wedding dresses are not at all uncommon. What is unexpected is that it’s beading and fabric as a piece of jewelry. But why not? We add beading to clothing as a means of accenting them and jewelry is worn as a kind of accent on our person. Same idea, right? So why not take those lovely designs off the dress and put them on pieces that can be worn and shown off on more than just one ensemble? Makes so much sense.
Alyson actually works with a lot of chain and beads. These bangles are quite a departure from her other jewelry. But there is nothing wrong with exploring something out of your range. From the press she’s gotten, its pretty obvious that these bracelets are now what she’s known for. Understandably. So, yep, don’t be afraid to step outside your usual line of exploration. You just never know what you might find and where it will take you.
Read More- « Previous
- 1
- 2
- 3
- 4
- Next »
